[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
looping in stereo
Hello,
Sorry if this seems a basic question for a lot of you but I need a little
help to setup my home recording place.
I have a lot of stereo devices (synths, drumboxes, amp simulators,...)
that
are going into 2 line mixers and from there to a small 1202 phonic mixing
console (2 FX sends mono>stereo).
The "tape out" is connected to my PC via USB soundcard.
The "soundcard out" is connected to my PA.
(The "MAIN out" is also connected to my PA (other IN) so I can sometimes
play without booting the PC.)
I'm mainly looping in stereo (mobius) and would like to retain the stereo
image of my synths.
The problem I'm dealing with is that I can't hear something I don't want
to
record. I can't record while listening to a rhytm patern for instance
without recording it also.
If I use the FX send on the mixer to feed the PC, I'm in mono.
If I use the 2 FX sends, it's difficult to have a correct level as one is
Pre- and the other post-fader.
Are there any easy solution? Should I buy a new mixing table?
Which "cheap" model have a stereo send or dual stereo outputs (with
switches
of course).
Would something like the behringer MINIMON MON800 fill the hole?
Thanks for any info,
Ben.
___________________________________________________________________________
Faites de Yahoo! votre page d'accueil sur le web pour retrouver
directement vos services préférés : vérifiez vos nouveaux mails, lancez
vos recherches et suivez l'actualité en temps réel.
Rendez-vous sur http://fr.yahoo.com/set