[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Syncing Two EDPs - having problems -SOLVED!!
Luis,
THANK YOU!
It was the threshold. I had it set to 3. I think I changed it a while back
when I was exerimenting with syncing to a drum machine.
Ahhhh.... I am a hapy looper again :)
Thanks again!
Craig
on 2/7/06 2:12 AM, Luis Angulo at labalou2000@yahoo.com wrote:
> Hi Craig,
> make sure the parameters on both units are exactly the
> same set the threshold to 0 and if u have more than
> one program, make sure the sync parameter is set the
> same for all.So far mines are behaving ok although
> every once in a while they still drift a bit,no idea
> why...
>
> --- bassad <bassad@cfl.rr.com> wrote:
>
>>
>> Hi,
>>
>> I'm having a sync issue with my two EDPs. (LOOP IV-
>> blackface)
>>
>>
>> I am using brothersync but when I loop a short
>> section (Ex: one note looping
>> at .85) the two EDPs drift apart fairly quickly.
>>
>>
>> I have sync set for "OUT" on both Echoplexes.
>>
>>
>> According to the manual, a midi clock overrides the
>> brothersync and I'm
>> trying to figure out if somehow I have missed a
>> parameter setting to adjust
>> that.
>>
>> The EDPS are connecting via a 1/4 cable for brother
>> sync and then a midi
>> cable. I use a FCB1010 to control them.
>>
>> any suggestions?
>>
>> thanks
>>
>> Craig
>>
>>
>>
>>
>>
>>
>
>
> www.luis-angulo.com
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com