[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Re: EDP Insert: Overdub, too?
>>>So (not to beat this into the ground...sorry!): sounds like you
>>>HAVE to use a dummy jack for this additional use of the feedback
>>>control on the panel. (I'm not complaining...
>>>
>>>David)
>>
>>
>>it doesn't have to be a dummy jack, you can use a feedback pedal for
>real.
>>
>>Makes sense really, because without a pedal, the feedback knob
>>controls ordinary feedback.
>
>Any special parameter settings I should be looking for to get this,
>since I do have a feedback pedal for real inserted to EDP's rear
>panel, and I didn't seem to have any difference in Insert: it always
>replace, not added (overdubbed)? Super effect, but the overdubbing
>of concise bits would be cool, too.
>
>I'll list some params I have currently set:
InsertMode to Sub
(because rPL isn't substitute ;-)
Loop/Delay should set to Stu or rPL
either will make Subst work as O/D when feedback knob is full up.
Now decide
Stu only changes the way Insert works, so as you've got insertMode =Sub
that's
probably the best for you.
andy butler