[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Programming the Behringer FCB1010 for Echoplex use, a quick guide
Nope that didn't work for me. The Expression Pedal A and B lights
come on when I go to that patch, but the pedal settings themselves
have no effect on the EDP.
TravisH
On 10/30/05, Kris Hartung <khartung@cableone.net> wrote:
> This is what I used...you might want to test my steps. I just programmed
> mine for both Volume and Feedback control.
>
> Kris
>
> Volume
>
> 1.. Press the PRESET button (e.g., whatever you use to trigger Record
>on
> your EDP) for which you want to program either expression pedal A or B
>for
> volume
> 2.. Press and hold down the DOWN switch
> 3.. Press the UP switch
> 4.. Press button 8 or 9 (Expression Pedal A or B), whatever you want to
> use to control volume
> 5.. Press UP to confirm
> 6.. Use Expression Pedal A to set your controller value for that
> expression pedal (use what is set in the EDP control panel in VolumeCont)
> 7.. Press UP to confirm
> 8.. Use Express Pedal A to set the minimum value (e.g. 0)
> 9.. Press UP to confirm
> 10.. Use Expression Pedal A to set the maximum volume value (e.g., 127)
> 11.. Press UP to confirm
> 12.. Press and hold the Down button to Exit
> Repeat steps 1-12 for other PRESET buttons (whatever you use for Overdub,
> Multiply, Reverse, etc.whatever button you want associated with that
>volume
> change function when that button is lit up
>
> Feedback
>
> 1. Press the PRESET button (e.g., whatever button you use to
>trigger
> Record on your EDP) for which you want to program either expression
>pedal A
> or B for feedback
>
> 2. Press and hold down the DOWN switch
>
> 3. Press the UP switch
>
> 4. Press button 8 or 9 (Expression Pedal A or B), whatever you
>want to
> use to control feedback
>
> 5. Press UP to confirm
>
> 6. Use Expression Pedal A to set your controller value (use what is
> set in the EDP control panel in FeedBkCont)
>
> 7. Press UP to confirm
>
> 8. Use Express Pedal A to set the minimum value (e.g. I use 106 to
>set
> a gradual fade-out of my loops when I pull the expression pedal all the
>way
> back)
>
> 9. Press UP to confirm
>
> 10. Use Expression Pedal A to set the maximum volume value (e.g., 127)
>
> 11. Press UP to confirm
>
> 12. Press and hold the Down button to Exit
>
> Repeat steps 1-12 for other PRESET buttons (those you use for Overdub,
> Multiply, Reverse, etc.whatever button you want associated with that
> feedback change function when that button is lit up
>
>
>