[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP preset secret???
At 03:10 AM 10/29/2005, mark francombe wrote:
>I suppose eveyone knows that pressing (and holding) insert before you
>make a loop, is a nifty way of changing presets??? Ive been using it for
>ages, but Im not sure where I learned it from, I don't think i found it
>in
>the book. But is there a simelar way of changing presets DURING loop
>play?
>I know I can change 'em via midi, but I like the "scrolling" method of
>the
>INSERT trick. Maybe an UP/DOWN combo would be good? Currently I "do it
>with my fingers"!
It's not a secret, that is in the manual. In reset, the Insert button
scrolls down in presets, and the Mute button scrolls up. You don't have to
hold it, you just press it until you get to the preset you want. When you
leave it for a moment, it will switch to that preset.
In play mode (after you have recorded a loop), if you want to change
presets from the front panel you have to go into the Parameter editing to
the Presets section, where you can load in a different preset.
It is much easier to change presets with midi of course, where a program
change message will do it at any time. The front panel way isn't that
great
really, we were just re-using some buttons that otherwise were not used at
that time.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com