[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP through rane SM82 problem



rane suggests that you ground their mixer to what ever chassis or rack case
you are using. also if yours uses a wall wart, try moving it away from the
rest of your gear to see if that helps.
Bill

-----Original Message-----
From: Luis Angulo [mailto:labalou2000@yahoo.com]
Sent: Monday, September 19, 2005 9:44 AM
To: Loopers-Delight@loopers-delight.com
Subject: EDP through rane SM82 problem


Hi gang,
I am having humming problems with the edp plugged into
to my Rane SM82.I have a roland preamp,repeater EDP
and sm82 plugged into a juice goose power
conditioner,when i disconect the EDP the humming is
gone,but even if i disconect evrything and leave the
edp by itself it still humms.No problems through my
little VLZ1202 mackie though.
Also when i turn the rane sm82 off it makes my active
speakers make a big boom which doesnt happen with the
1202,any ideas?
thanx
Luis

www.luis-angulo.com

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com