[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Programming Rocktron All Access - HELP!!!!



There is a fellow looper called Glen Poorman who can
help you out,i believe he uses it
http://www.poorman.ws/detroitstick/
cheers and good luck
Luis



--- Craig Mitchell <camitchell@cfl.rr.com> wrote:

> 
> 
> Hi,
> 
> I'm new to the list and searched the archive but
> have not yet found the
> answers to questions.
> 
> I am running two Echoplex Pros (loop IV)and trying
> to control them with a
> Rocktron All Access Pedal. I have made progress but
> a few things are still
> not working quite right.
> 
> I have a good understanding of MIDI and how to
> program the Rocktron All
> Access but success so far as eluded me on this one.
> 
> First off, the Echoplexes are sync'd up with a TRS
> cable via brother sync
> and the master has a midi cable going to the slave.
> 
> 
> How are people programming the All Access? Are you
> using Control Numbers via
> Instant Access switches? Or are you using Note
> ON/OFF via the Custom
> settings for presets?
> 
> I have tried both and am still getting mixed
> results.
> 
> With the Echoplexes set to 'Controlsource=CNTR' I
> have been using the
> Instant Access switches to trigger various
> functions.
> 
> Record - This works but sometimes when I press the
> button it starts
> recording a clears right away. A second press gets
> it recording properly and
> I can loop.
> 
> Mute - works fine
> 
> Halfspeed - works fine
> 
> Clear - This one does not seem to work at all. I
> have tried a couple
> different ideas to no avail.
> 
> However, if I press the mute switch, the clear
> switch, and then the mute
> switch again it clears???? Something is not quite
> right there. I must be
> close. :)
> 
> Soooo... any help is greatly appreciated! Are you
> using Latching, Momentaty,
> Hold on the All Access Instant access switches.
> 
> Can one replicate the Echoplex pedalboard function
> of holding down the
> record button and clearing the loop with the All
> Access via midi?
> 
> A step by step guide from someone who has this
> dialed in would be fantastic.
> 
> Thanks!
> 
> Craig
> 
> 
> 
> 


www.luis-angulo.com


                
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com