[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: jamman | bob sellon software
At 8:43 PM +0100 6/20/05, goddard.duncan@mtvne.com wrote:
> >>I have been using Bob's ROM for quite a while now and I have to say
>that I would never go back. The front panel is very confusing, so I
>use a Behringer FCB1010 to control the thing. Using MIDI is really
>the only way to go with this. At first I tried the 3 button
>footswitch and it worked OK, but you only get a small amount of
>what's available.
>
>I would recommend using the FCB1010 or some other MIDI pedal where
>you can control what each switch is sending. Trying to map the
>program changes inside the Jamman is fairly frustrating. What would
>be very cool is a computer based editor for this, but I would no idea
>how to go about doing this.<<
>
>edwin- thanks for that. I hadn't looked into the revised midi
>implementation properly. in fact, I have an fcb1010 currently unused
>so I'll give this a go.
>
>I don't suppose you could provide a sysex dump of your fcb1010 setup? :-)
Sure! I can't guarantee you'll be happy with it. I use the java
fcb1010 programming tool available at the fcb1010 yahoo group.
Should I email to you directly?
>
>have you added the novram to it aswell?
If that is the one that maintains settings memory, yes.
>
>I'll still have a spare rom anyway, since my guitarist will not want
>his jamman upgrading no matter how clever it gets. the problem is
>that he can't perform a similar upgrade on himself!
I have experienced the same problems!
Good luck!
Edwin
--
Edwin Hurwitz
Boulder CO
http://www.indra.com/~edwin
http://www.cafemontalban.com Location Recording Services