[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Glitches?
Pouring coffee in my EDP always works to fix up whatever is wrong with
it on any given day. You might want to try that first.
-J
phill wilson wrote:
> Hi ronan
>
> first thing to say is dont woory too much.
>
> im my experiances the edp is a glitchy but resiliant unit, it messes up
> quite a lot but the problems are nearly always fixable without tech
>help.
>
> if the glitch that you are talking about is a loud noise that happens
> NOT on the output of the direct signal and NOT when the unit is played
> through but without a loop actuve, but DOES glitch when you make a loop,
> even when there is no instrument level going to the input. I think i
> know what might be up
>
> its the D-A convesion of the signal where the loop rejoins the input on
> the output path.
>
> this can be solved by opening up the unit after discharging satic from
> yourself and the unit (look on the web if you dont know the procedures
> to acomplish this) then look inside for the large square grey/black
> block on the bottom left of the board. press firmly but carefully on the
> side square (the outside is the houseing) do this in a very quiet place
> and listen for a pinging combing sound this is the feet of the chip
> relocating into place.
>
> hope this works for you, did for me!!
>
> just to mantion though, no comebacks, do at your own risk! but it is
> easy to do and low risk in my opinion.
>
> Phill