[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: I'm feeling kinda Loopy....
In a message dated 9/21/04 10:08:27 PM, jonathan@kelloggcreek.com writes:
<< I don't know much about feedback, except that the manual says there are
a
lot of settings for it. Does feedback just reduce the volume of the first
loop as you layer more on top of it? Any recommendations for where to set
it?......
Lastly, there's a lot of hiss, is there some trick to cut all that
noise
down? >>
Hi
I can only speak for the old version of the rang where there was no
feedback
control. It seemed to me that each layer of overdub attenuates the volume
of
the previous layer by 10 to 15%. So after 4 overdubs the first layer is
starting to get buried in the background.
I found that careful adjustment of the Trim knob helped reduce hiss. This
requires some adjustment of the input volume also.
I had the old version of the Boomerang and I have the old version of the
RC20.
Dang, I'm feeling old.
regards
BobC
www.cdbaby.com/rpcollier
http://trundlebox.iuma.com
http://tinyurl.com/yuru7