[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: DD-20 continued
On May 21, 2004, at 3:10 PM, thetoyroom@comcast.net wrote:
> 3. Someone mentioned a 'bypass' switch, which was described as a
> 'punch in/punch out' type function. Does this mean that you can set
> the feedback to 100%, get a loop going, then 'bypass' out, and
> continue layering over the loop, without it getting fed into the loop?
> This would be nice as that is a classic methodology for the PDS
> series pedals, which I miss with my DL4 very much. If you are in
> delay mode on the DL4 and set a high repeat setting, everything you
> play gets fed into the delay line, unless you have a more complex
> mixer/send setup (which I did for certain situations).
right. the "bypass" button is actually a mute to the input of the delay
line.
nice to see spirited discussion of this pedal!
---
Eric Williamson
www.suitandtieguy.com