[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: HELP on EDP and the FC-200!!
> > If anyone out there has a quick "how to" for me, it would be greatly
> > appreciated.
>
> You need to set the MIDI controller to send either Note or CC messages
> which correspond to different Echoplex functions.
The FC-200 has a "mode" button (the small rectangular black button right
under the display). After powering up the FC-200, hit that button once
to put it into "CC" mode or twice to put it into "Note" mode. Now all
of the pedals on the FC-200 are either sending CC messages or Note
On/Off
messages depending on the mode.
I'm going to assume that you have the manual for the FC-200 because
you are going to have to do some setup work on the foot controller
and it's not obvious how this is done. If you don't, I strongly advise
calling Roland and getting one (you can do this for about $12).
What you do after that depends on whether you want to control the
EDP with CC messages or Note On/Off messages. I use CC messages and
the key there is making sure that all of the pedals are set to
"momentary" meaning they send a value when the pedal is pushed
and another value when the pedal is released.
Glenn