[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Malfunctioning Line 6 DL4 Question
Have you tried doing a reset? I can't think of the
procedure, but it's in the manual.
John
--- ArsOcarina@aol.com wrote:
> Hello all,
>
> I haven't written for a while but I'm running into
> a little equipment difficulty in the "small rig"
> set up I've been trying to put together-- the
> looping heart of which is a Line 6 DL4 Delay
> Modeler that has apparently gone totally kaput.
>
> I get no signal through it at all (except in bypass
> mode). I put new batteries in it to see if that
> was the problem -- with no change. I've checked
> all of the cables and they're all okay -- as I said,
>
> I DO get a good signal in bypass mode.
>
> The one exception to the above is in "Loop
> Sampler" mode where I get no signal at all
> no matter what buttons I push or where any
> of the knobs are set at.
>
> It's kind of sad really. The thing hasn't had that
> much use in the year or so that I've owned it.
> I used it on a gig or two where I could ill afford
> to schlepp my big "rack of doom" rig with EDPs
> and all. That's the only time it's really seen any
> abuse -- and that was 6 to 8 months ago.
>
> The rest of the time it sat by a combo amp in
> my living room for spontaneous use (which it
> rarely got even then). It mostly just collected
> dust.
>
> Anyone else ever encounter this sort of thing?
> Anyone have any opinion on Line 6's service
> department? How fast are they? What sort
> of repair costs can I expect?
>
> Thanks!
>
> Ted Killian
>
=====
John Tidwell
__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com