[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: 2 EDP in stereo: how to match parameters



Thanks Gary

This is helpful to know. But when the 2 EDP are on the same channel
(stereo) they're both going to be changing channels together, so you
can't have them be different until one or the other is set to different
channels anyways. 

Still hoping lightning strikes (I'm beginning to think this may be a
facility for the next EDP upgrade)! 

I'm beginning to think this is just the way it is and touching the EDP
is required.  


> -----Original Message-----
> From: Clayton Lehman [mailto:hqr@cox.net]
> Sent: Tuesday, February 03, 2004 2:24 PM
> To: Loopers-Delight@loopers-delight.com
> Subject: RE: 2 EDP in stereo: how to match parameters
> 
>  -----Original Message-----
> From: Neil Goldstein [mailto:ngold@comcast.net]
> 
> <snip>
> I think a patch which duplicates the manual keypresses to change the
> channel
> (and back again) is in order, and I think the PMC10 could do it, but
each
> keypress only INCREMENTS the channel value so it would take like 15
> virtual
> presses to get from say 8 back to 7 again.
> 
> Note on with no note off is read as a long press--resets channel to 1.
> Hey, try it!
> Relay