[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Repeater / UC-33 problems
Per,
I don't have my manual in front of me, but I believe it's a function
called "drawbar mode" and is intended for Hammond organ type
soft-synths to let the faders send reverse values and act as a drawbar
pulling in and out. Check the manual, or I'll be glad to look it up
when I'm at home.
Blair
On Wednesday, December 10, 2003, at 03:33 PM, Per Boysen wrote:
> Hi,
>
> I should have posted this question on the Repeater list but I'm not
> getting
> any mails these days from that list since my ISP slapped a spam filter
> over
> my account. Oh well... There are some Repeater users on LD as well, so
> here
> we go:
>
> I'm programming a the little midi mixer/controller Evolution UC-33 to
> control the Repeater and now I'm discovering that the UC-33 faders are
> sending midi controllers "upside down" to the Repeater. This is a real
> bummer 'cause at bottom of the fader I'm getting the loudest track
> volume
> out of the Repeater. And cranked all way up the fader silences the
> Repeater.
>
> So the question is if anyone happens to know if there's a way to
> reverse
> midi control values in either the UC-33 or the Repeater?
>
> Thank you
>
> Per Boysen
>
>
>