[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: FC-200 with EDP
> << ...but if some can make an EDP controller from one of these
> please do tell >>
>
> Well.. for what it's worth (since glenn and I have already talked about
this
>
> ;)... this is what I'm currently using. I use the FC-200 to control
>patch
> changes on 3 different FX units, via CC mode to control both a Repeater
and
> an
> EDP, and even dabble in note mode some (via a synth module). The only
real
> trick I guess is switching modes. In addition to it's 6 expansion
>jacks
> though,
> there's actually a 7th jack that takes a FS-5U and is used to switch
modes.
>
> You can set how many of the four modes it cycles through. I actually
>have
> it
> set to just two, so my FS-5U changes the FC-200 back and forth from
>patch
> change
> mode to CC mode. When I want the note mode, I angle my size 13 shoes
>to
> just
> hit the little tiny mode button with the edge of my toe. Tricky.. but
> do-able.
thank's for that Tom, that sort of
info is actually pretty hard to come by.
(because Roland don't put manuals on-line)
any chance you could give a quick run down
of how that device deals with sending to different MIDI channels?
( the other question we always ask is, how much time
between pressing the switch and getting a response)
andy butler