[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE:Ultimate EDP Controller
In a message dated 03/12/03 20:21:38 GMT Standard Time,
Loopers-Delight-d-request@loopers-delight.com writes:
> FC-200 MIDI foot controller (I used to own one and sold
> it) and it occurred to me that this could make a great
> dedicated EDP controller. You can put it in a mode where
> all 13 buttons will send CC messages or Note On/Off
> messages plus set the built-in expression pedal for
> feedback.
actually the note-On /Off configuration is useless on this
device.
You'd have to use CC to control an EDP.
( which should work)
but you can't send CC and prog. change from the same bank.
(so not as good as Behringer FCB1010 for EDP prog change and control)
I only looked at the manual (specifically with EDP in mind)
so I could be wrong, but it seemed to only send
instructions on one MIDI channel at a time.
Is that right?
(not a problem for just 1 edp of course)
It does have about 5 sockets for controller footpedals in it's favour.
....but costs the same as 2 of the behringers (which have 2 built in
controllers)
...but if some can make an EDP controller from one of these
please do tell
andy butler