[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: (another) Question about Line6 DL-4
--- Tim Nelson <psychle62@yahoo.com> wrote:
> My DL4 is starting to misbehave slightly. The
> reverse/halfspeed button works only when it feels like
> it.
>
> Has anyone else had this problem? Which would be more
> likely: a bad switch, or something worse?
My guess would be dirty contacts in the switch. I don't know how hard those
things are to get apart, but my first line of attack would probably be to
disassemble until you can get to the switch, then shoot a bit of DeOxit
into it.
Could also be something simple like a cold or broken solder joint from the
switch
to the board, so check that while you're in there.
Greg
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com