[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: More DD-20 questions...
On Friday, July 11, 2003, at 08:06 PM, mark wrote:
> OK, what if I took a DD-20 and used it in delay mode in the effect
> loop of a mixer. I could tap out a say 15 sec delay and put it on
> 100% feedback while I was building up a nice ambient loop. Then, when
> I no longer wanted to add to the loop, I could turn down my send to 0.
> Loop continues and I play over it. Then when I'm ready for the loop
> to start changing again, I bring the feedback down to say 50% and
> bring my send up to 100%. When I hear something I like, I bring the
> feedback up to 100% and turn down the send again. This would work,
> wouldn't it?
yes, but i'd bet you'd get lots of noise build-up, though.
i'd use the input volume on the unit if i could. if it has one.
i'm currently looping with a PCM-80, and i have to be careful with the
noise thing on that as well. the input gate on the EDP was quite a
genius move.
---
Eric Williamson
www.suitandtieguy.com