[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: using presets on the echoplex



Hi Kim,

Thanks. My reasoning was that if I wanted everything
to have an 8th cycle of 8 except one, and I had one of
the functions set with a preset using an 16 on the
8ths cycle, that if I switched to it and then switch
back, the preset would stay on that preset with the
8th cycle still set to 16, unless I had all the other
functions set with a program change to return to a
preset with the 8th cycle set to 8. Is my logic
illogical here?

All the very best!
Terry


-- Kim Flint <kflint@loopers-delight.com> wrote:
> At 11:28 AM 6/24/2003, Terry Blankenship wrote:
> >I am using an echoplex with loop IV and a PMC10
> midi
> >pedal.
> >
> >My question is on using presets in general.
> >
> >I set up everything to start with a program change
> >(which changes the preset in the echoplex to what
> ever
> >preset I want), then I set the note on and off
> info.
> >Is this the correct way to be doing this?
> 
> you mean every midi command you have programmed for
> the echoplex starts 
> with a program change for the presets? I can't quite
> understand why you 
> would do that. is there some goal you have here? I
> could see if you had 
> some special function you wanted to do, like
> changing 8ths/cycle at the 
> same time as a halfspeed command, as was previously
> mentioned. But it seems 
> strange to do it for every function all the time.
> 
> Most people just set parameters a certain way and
> leave them. Some people 
> have a few different settings they switch between
> once in a while. that's 
> the point of presets. It just simplifies changing a
> bunch of parameters at 
> once. on the occasions when you want to change them,
> you would send the 
> program change for it, and then otherwise go about
> using the echoplex the 
> same way. But I don't think very many people would
> have a reason to send a 
> program change message every time.
> 
> kim
> 
> 
>
______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    |
> http://www.loopers-delight.com
> 


__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com