[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EFC-7 vs. FCB-1010
John, I'm currently just using an FCB 1010 to control my EDP. It works
quite nicely. You can hear a track from a recent coffee shop performance
at:
http://home.earthlink.net/~thefates
It's called Naked Blues, and is located on the music page. All of the
EDP control is done with just the FCB.
Smiles,
Cara
At 09:39 PM 5/14/03 -0400, you wrote:
>Hi all,
> I'm about two weeks away from ordering an EDP+.(I currently use DL-4
>for my live looping) My question is in regard to footpedals. I had
>planned to just get the EFC-7. However, I've been thinking about
>getting an FCB-1010 instead. I know that some people use both pedals in
>their set-up. Is anybody using just a FCB-1010 to control their EDP?
>If so, can you share how it's going. I'm concerned about floorspace at
>my live gigs (I play a lot of coffeeshops and small bars) I'm also
>thinking of condensing a lot of my effects pedals into some rack mounted
>multi-effects processor(like a Lexicon MPX-200). I know that the
>FCB-1010 would be able to control that as well. If I control multiple
>devices(EDP+, MPX-200, POD) with one controller (FCB-1010) that would be
>super. Am I expecting too much? Should I just get an EFC-7 and stick
>with my effects pedals instead?
>
>Thanks for your time,
>John
>www.johnmazzarella.com
>
>
---
"The only things I really think are important, are love, and eachother.
-Then, anything is possible..."
http://home.earthlink.net/~thefates
Please visit BadFiction and The Guitar Cafe.
http://groups.yahoo.com/group/badfiction
http://groups.yahoo.com/group/the-guitar-cafe