[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: FW: Loop Copy/Multiply Question
At 07:57 AM 5/11/2003, ARTHUR LEE MUSIC wrote:
>Is there a way to copy say a 2 bar drum loop from loop 1 to loop 2 and go
>back to loop 1 and still use the multiply function?
yeah, you just copy the loop to loop 2, then go back to loop 1 and press
multiply.
>I want to be able to do a verse/chorus type of deal and I tried doing it
>today and when I got back to loop 1 and pressed multiply it would make
>this unhappy stuttering noise.
that doesn't make any sense. It sounds to me like you pressed something
other than multiply. Maybe you used SUSmultiply from a midi command by
mistake? Or you have the InsertMode parameter set to SUS for some reason?
>My goal is to lay down a short drum groove and copy that to the next loop
>and then multiply loop 2 out with chord changes and then go back to loop
>1
>and multiply that out with different chords.
that should be very straightforward.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com