[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Guinness World Record Looping
At 05:40 PM 5/9/2003, Jesse Ray Lucas wrote:
>Well, as we learned from Kim and/or Matthias about the EDP, it shouldn't
>be
>able to make a loop shorter than 1.5ms, because that's the length of time
>it
>takes the software loop to cycle. Still, good luck hitting the Record
>button twice in 1.5ms. Maybe in SUS Record mode...
yes, exactly. With SUS Record it is quite easy to get micro loops less
than
10ms long. Rather than holding the button down, just tap it. The loop will
be as long as the contacts in the switch touch each other, which is not
very long. You get loops short enough that the loop repeat rate is itself
an audible frequency. From there you can multiply them out, insert,
replace, overdub, etc. If you use the SUS modes of each of those fuctions,
you can again drop in micro sized fragments of sound and get a lot of
interesting glitchy loops out of it. (see Andre.) This is the granular
loop
idea that was expanded into a whole set of features in the LoopIV upgrade
for the Echoplex.
Another fun idea is to turn the feedback down, leave overdub on (or use
delay mode), and play an audio source through the echoplex. Drums work
well. Then tap the record to get micro-length delays for a comb-filter
effect. Each time you re-tap record the delay length will be slightly
different, giving a different pitch to the sound. Adjusting the feedback
changes the decay of it. Its a lot of fun to manipulate this stuff live.
Sorry Cameron, you didn't invent anything new, or set any records!
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com