[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
SV: EDP problem
> > doesn't seem to
> > > ever go to 100% feedback, so everything fades... not sure if the
> > > problem is mechanical or software based...
> > >
> > > any ideas?
>
>
> No ideas, I'm afaid, but I have the same problem. I'm using LOOP4 and
> controlling feedback by a midi expression pedal that is calibrated over
> the entire range; 0 to 127.
>
> So - any ideas?
>
Hi Per,
You're using the FCB1010, right?
Well I notice that my FCB1010, even though calibrated
to compensate, doesn't always go to 127. Sometimes it
gives 126 as the max value.
I reduced this effect by not going fully toe down during calibration,
but still happens sometimes.
(well, I assume its the FCB1010, maybe the EDP doesn't respond
quick enough when there's too many CCs incoming. )
Try watching the EDP display as you toe down.
As to Steve's problem, dunnow
andy butler