[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Setting Loop Size with Windowing
The Multiply/Record process is now called "windowing"--this allows you to
create a new loop with the "old" stuff even when Overdub is off. It also
allows you access to the "old" thru Undo . . .
So can the FCB do momentary?
Gary
At 6:38 AM Sunday, March 16, 2003
You wrote:
Thanks for the reply this might be useful either way I got this one from
Gary which seems like it might be more of what I was looking for
<snip>
To review: Multiply/Record creates a new loop the size of which is
determined by the time they are pressed. If you are using quantize=on, two
presses of each is required. That will set your loop time.
Gary
-----Original Message-----
From: Goddess [mailto:thefates@earthlink.net]
Sent: Sunday, March 16, 2003 1:04 AM
To: Loopers-Delight@loopers-delight.com
Subject: Re: Delay Mode..
Oops, forgot to mention that I do this in loop mode.
Smiles,
Cara
At 10:43 PM 3/15/03 -0700, you wrote:
> Personally, I always use sus record, so I can get very quick samples of
>audio with only one press and hold of a pedal. -With the feedback less
>than 100% and overdub enabled, you can get an easily changeable
>delay-like feel this way. -Hope this helps...
>
>Smiles,
>
>CQ
>
>At 11:05 AM 3/15/03 -0500, you wrote:
>>Hi
>>Does anyone have any learned advice on how to better control the delay
>>length on the EDP beside start record, end record. I want to use it as a
>>delay device too and would like to reduce the distraction of the
>>aforementioned method. I have an FCB for controlling the EDP, but
sometimes
>>find that fiddling about with the pedals sometimes reduces my
concentration
>>on the music and playing, any advice on this one?
>>
>>Al