[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Digitech Time Machines Foot switch problems
Louis,
I ran into a similar situation trying to combine the
analog footswitch jacks on my FCB1010 with functions
on my 7.6. The two switches (which are latching) are
connected to the effect on/off and the delay bypass.
I have a separate momentary connected to the
repeat/hold jack. I had to swap the polarity on one
of the latching switches, which I did by building a
small adaptor (instead of cutting up a nice cable)
which just crossed the wires. I always thought it was
the FCB1010, but perhaps it's the 7.6 with the
polarity issue.
Good luck! Let us know what happens.
Regards,
Rich
--- Louis Rossi <tarbit@hotmail.com> wrote:
> Hi folks,
>
> I have 2 loopers in my “rack “ rig right now. The
> Digitech RDS 8000 & Gibson
> EDP
>
>
> Now I have the EDP ft switch but I want to have a
> smaller alternate for
> space reasons. Can anyone suggest switches for the
> record & overdub jacks…
> I’m having problems with the switches I already
> have… Korg dual momentary
> switch & a Roland latch switch. As far the RDS 8000
> goes I tried using the
> same dual switch & when both the Bypass & Repeat
> hold were plugged in the
> bypass side started not to work… Maybe I need to
> find the “time machine” ft
> switch? Help please
>
> http://join.msn.com/?page=features/featuredemail
>
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/