[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Loop V request (was Re: A/B switch for Echoplex)
>All that's not necessary. Just get a decent midi controller. Put the
>Echoplexes on two different midi channels. In your midi controller,
>have a set of controls for Echoplex A, a set of controls for
>Echoplex B, and a set for A & B. That's part of the reason why we
>added the MIDI pipe feature.
>kim
oh shure, I forgot about this one!
It may not be practical any more if you use serveral pages with
DirectMIDIcommands and loop calls, because you would have to tripple
them all.
>
>At 06:00 PM 8/24/2002, Mark Hamburg wrote:
>>Here's an idea for Loop V (or Loop IV 1.1):
>>
>>Add another mode control that allows to EDPs to be connected via MIDI
>with
>>one connected to the footswitch. The one connected to the footswitch is
>the
>>master. The other is the slave. That already works, but now for the
>twist.
>>The mode control changes between Master, Slave, and Stereo and controls
>>whether or not each Echoplex responds to foot control and feedback pedal
>>information.
>>
>
>______________________________________________________________________
>Kim Flint | Looper's Delight
>kflint@loopers-delight.com | http://www.loopers-delight.com
--
---> http://Matthias.Grob.org