[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Repeater upgrade horror story



settle down sonny boy, it's probably not that bad.  Your OS must have 
gotten corrupted somewhere along the line.  Re download it, and try 
again.  There's nothing that's melted in your Repeater.  I bet it will 
all be fine.

Mark

On Monday, March 11, 2002, at 08:52  PM, Chris Muir wrote:

>
> I finely got around to applying the 1.1 upgrade to my Repeater, and it 
> had a complete meltdown. After copying the upgrade to my CFC, and 
> starting up the Repeater, the upgrade seems to be going properly. It 
> got through the Verify phase, and then the countdown installation 
> phase, but it never reached the final phase when it "signs on" with the 
> Repeater 1.1 display, it just all goes blank.
>
> I've tried to apply the upgrade several times with more or less the 
> same results.
>
> So now that I have an unusable Repeater is there anything I can do 
> other than sending it back?
>
> Thanks,
> Chris
>
>
> --  http://www.xfade.com/ | In theory, there is no difference between
>     cbm@well.com       | theory and practice. In practice, there is.
>