[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Muting Repeater & Echoplex Simultaneously
At 08:26 AM 2/26/2002, plain jane wrote:
>My thought is to control the Echoplex by midi and to send it control or
>program changes through the
the echoplex doesn't use program changes to control its functions, so make
sure you are not sending those to it. It uses either note on/off or
continuous controllers.
>I ve also tried just hooking the midi wizard straight to the echoplex to
>get it to mute via a control change. No luck there either, so I m doing
>something wrong with the midi controls, any help is greatly appreciated.
make sure you have midi channel set right, and the echoplex ControlSource
parameter set to use continuous controllers.
>I have tested the midi wizard as well and it send control changes fine to
>the Repeater so it isn t the problem.
it could be. I don't know the rolls pedal well, but I always thought it
was
lacking in some way such that it didn't work with the echoplex. What
you'll
want is for it to send a continuous controller with some value when you
press a switch down, and when you release the switch it should send the
same controller with value 0. If it can't do that, then you may want to
consider investing in a better pedal than the rolls.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com