[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: mo' EDP Tutorial, pleas!



Andre, Thanks for the info!  I just tried it -works fine.  The ending w/
> "Record."  (Do NOT end this function with "Multiply" a second time.)<
is the tidbit I overlooked initially (I need to read things twice!;-)

Definately opens up a new dimension...

BTW & slightly OT: Yesterday at sunset I rode my fixed (bike) down to
Chapman School in NW Portland to watch the Vaux Swifts LOOP and spiral
their 1000+ group down into the large octagonal chimney for the night. 
Whoa!  It's a favorite autumn activity for me - these little birds put
on quite a show, the large swirl a mesmorizing choreography.  I guess
it's a gathering of tribes for them, collecting before migrating south. 
They look like swallows, but evidently one difference is that their
wings flap one at a time...one's up while the other is down (a little to
quickly to discern).

David  

Andre LaFosse <altruist@altruistmusic.com> said:
> Hi David,
> 
> DaViD AuKeR wrote:
> 
> > > It allows you to pick out a small section of of a larger loop, loop 
>it, do
> > > anything you want with it, then if you like you can go back to the 
>original
> > > loop.
> > >
> > 
> > Andy, Kim, et al.: HOW IS THAT DONE?  How would the appropiate
> > parameters be set to accomplish that?
> 
> 1) Set Quantize to OFF
> 
> 2) At the precise point in the original loop that you want to extract a
> new smaller section from, press "Multiply."
> 
> 3) At the precise point that you want the new, smaller section to end,
> press "Record."  (Do NOT end this function with "Multiply" a second 
>time.)
> 
> You should now have a new, shorter loop.
> 
> If you want to go back to the original loop, you could use UNDO,
> although it's possible that you could use up too much memory in
> subsequent operations to be able to return completely to the original 
>loop.
> 
> One way to avoid this would be to use multiple loops: before you extract
> the shorter loop (in the three-step example above), copy the original
> loop to a new loop location.  Then perform the edits on the copied loop.
>  If you want to go back to the original loop, it's already stored in  a
> seperate location.
> 
> Hope that helps,
> 
> --Andre