Mixer Aux send 1 > Akai Headrush > Boss
VF-1 > channel 9/10 (stereo channel)
Mixer Aux send 2 > EDP Pro > Korg A1
>channel 11/12 (stereo channel)
Groups 1,2,3,4 > Lexicon core2 card then back in
the mixer with the 8 outs
Control Room outs > SSI amplifier
Main outs > SB Live then back in the
mixer
Tape in and out free for other fx or my
notebook.
Sometimes a Quadraverb or other fx in the Korg A1
fx loop
Compressors in the channel inserts (mainly for
mics)
----- Original Message -----
Sent: Sunday, July 22, 2001 4:56 PM
Subject: Re: Too many loopers, not enough
auxes...
In a message dated
7/21/01 9:16:00 PM Eastern Daylight Time, tcn62@ici.net
writes:
I'm still far from sure that it's the best way to connect it
all, though.
How have you guys approached using a massed pile of several
simple loopers
in combination (as opposed to a more multi-functioned
device like the EDP)?
my problem also tim.....its
time for the yearly "please post your signal
path" thread.....with the
addition of all the electrix pieces that lots of us
got, i have no idea
what im doing (as if i ever did).....this is how i am set
up today:
my ae-185 has two outs, one piezo and one elec.....piezo->sans amp
gt-2->
mackie 1202 vlz-pro (channel 3).....
electric-> mackie
1202 (channel 4).....
aux send 1->zoom 2100->digi space pedal xp
300->boss delay dm-3->boomerang
both line out and aux out
->filter factory->warp factory->mo-fx one left out
straight to
mackie 1202 (channel 1)right out->de armond twister (phase
shifter)->mackie1202 (channel 2).....
aux send 2->alesis q-2
right back into aux returns.....
casio cz-5000 and mic both go straight to
the mackie1202
here is a question for rang users, do you fine a real
drop off in power with
the aux send on the rang? i really got to boost its
volume at the
mackie.....ok, now if anyone got this far in my post and you
have suggestions
please post me off list.....i bet there are almost
infinite ways to connect
all of this stuff and i would be so sad to miss
some obvious goonzo
connection making my system sound a little bit like
the famed "againinater"
(sp?).....perhaps this is too much to hope
for.....:)m
p.s. i will be curious to see how this post prints on
LD