[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Is it possible to sync Vortex to EDP?
>I'm sure it's too late to ask for this for the next version, but would it
>be
>possible to add a 'sync=both' option, that syncs to midi and >also< sends
>out a beat sync signal, so you could sync your EDP to midi, and your
>vortex
>to your edp?
>
>This would be absolutely killer.
We cared about thoses chain situations. For example: If a BeatSync
arrives during reset, we assume that we sync to it and send out the
MIDIclock, even at Sync=IN (this is for the version I am working on,
in the shipping 5.0, MIDIclock is allways sent
Now you want the oposite: MIDIclock in to BeatSync out. No, with
Sync=in BeatSync is not sent and with Sync=out MIDIclock is not
received.
But BrotherSync is sent out even at Sync=IN for a similar reason: It
allowes to connect one EDP to the MIDIclock source and transfer this
sync through the brother cable to more EDPs. The BeatSync signal is
on the ring of the 1/4 jack (the tip is the sample clock), so its
also useable.
---> http://Matthias.Grob.org