[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: sync-ing non-midi loopers???/Quiet switches for Headrush!
thank you H.Eye. very informative.
jimmy george
Hawkeye255@aol.com wrote:
> jack,
> Good Idea! They should stay perfectly in sync. And the switches
>inside
> the Headrush are DPDT (push/push) so you even have extra lugs on each
>switch
> to do it. Aaaaand one wall wart is plenty, just make up a pig-tailed
>Y-plug
> for one of them. I use this all the time. For instance, I have had two
>Korg
> X5DR's running off one wall wart for two years now and both my
>Headrushes are
> on another, etc. Works fine.
> I use my Headrushes differently than you suggest however. One's 'mix
> out' goes to the other's 'input'. That ultimately gives me a 23 second
>loop
> with many, many, many layers, if I so choose.
> Btw: I have found much quieter switches for the Headrush too, if you
>do a
> lot of vocal or acoustic instrument looping in a very quiet room where
>the
> click of the switches is picked up by your mic(s). Alcoswitch Part#
> MPG-106D. SPDT. They are not the 'combat strength' switches the
>originals
> are however. I remounted the original switches on mine with rubber
>washers
> and that helped soften the click sufficiently for me.
>
> good luck,
> 'hawkeye'