Result for query 'pmc-10,pmc10'
Archive Top | Looper's Delight Home | Looper's Delight Mailing List Info
41:
I recently bought a Digitech PMC-10 for about $100 used. It has a way 45:
The PMC-10 gives you 500 patches which can be organized any way you like in
70:
doesn't have anywhere near the MIDI control the Digitech PMC-10 has, it has
199701/msg00258:Re: oberheim echoplex used with midi foot switch
43:
work, Rocktron All Access should work, and the Digitech PMC-10 should work 44:
based on the manual. The PMC-10 is long out of production, and I have no 45:
idea if the current Digitech pedals are similar. I got my PMC-10 used for a
199701/msg00262:Re: oberheim echoplex used with midi foo
23:
work, Rocktron All Access should work, and the Digitech PMC-10 should work 24:
based on the manual. The PMC-10 is long out of production, and I have no 25:
idea if the current Digitech pedals are similar. I got my PMC-10 used for a
25:
Digitech pmc-10 for $100, which is quite nice) The echoplex footpedal
22:
had a Digitech PMC-10. Actually I had five. Sequentually. They were all 28:
I went to the PMC-10 from an ART X-11, the only MIDI controller I was aware
21:
> Digitech pmc-10 for $100, which is quite nice) The echoplex footpedal
23:
>had a Digitech PMC-10. Actually I had five. Sequentually. They were all 46:
least everything the pmc-10 does, probably a lot more. You pay a lot for it 47:
though. Those were the folks who suggested the pmc-10 to me, since the 49:
pmc-10 until the rocktron came out.
25:
Digitech pmc-10 for $100, which is quite nice) The echoplex footpedal
101:
>> Digitech pmc-10 for $100, which is quite nice) The echoplex footpedal
45:
> Digitech pmc-10 for $100, which is quite nice) The echoplex footpedal
3:
Re: PMC-10 10:
Subject: Re: PMC-10
Limit of 5 matched lines per file exceeded...
25:
>> pmc-10 for $100. It can store 500 presets! It even has a midi in, which 28:
>You sure love that PMC-10 don't you Kim??? :-) Know where I can pick one 33:
that one guy, actually. And it's not that I find the pmc-10 particulary
3:
PMC-10 10:
Subject: PMC-10 24:
>pmc-10 for $100. It can store 500 presets! It even has a midi in, which in
Limit of 5 matched lines per file exceeded...
24:
> pmc-10 for $100. It can store 500 presets! It even has a midi in, which 27:
You sure love that PMC-10 don't you Kim??? :-) Know where I can pick one
38:
pmc-10 for $100. It can store 500 presets! It even has a midi in, which in
69:
Re: PMC-10, August 06, 1997 467:
PMC-10, August 06, 1997
43:
>from a Digitech PMC-10.
28:
from a Digitech PMC-10.
3:
Re: PMC-10 10:
Subject: Re: PMC-10 19:
I too use a PMC-10 and have found it to crash sometimes unexpectedly.
Limit of 5 matched lines per file exceeded...
199712/msg00307:Re: I Saw Three Chips Come Sailing In...
37:
recommendation is to pick up a used Digitech PMC-10. I got mine for $100,
199712/msg00347:ccMail SMTPLINK Undeliverable Message
681:
>Subject: Re: PMC-10 711:
>I'd love to check out a PMC-10, but I think the problem there is finding 746:
>most affordable but maybe not as roadworthy units (PMC-10) is no longer 750:
>the market is so small, that's why the PMC-10 and the rfc-1 midigator are
3:
Re: PMC-10 10:
Subject: Re: PMC-10 38:
I'd love to check out a PMC-10, but I think the problem there is finding
Limit of 5 matched lines per file exceeded...
199712/msg00343:Re: ccMail SMTPLINK Undeliverable Message
339:
>Subject: Re: PMC-10 369:
>I'd love to check out a PMC-10, but I think the problem there is finding 404:
>most affordable but maybe not as roadworthy units (PMC-10) is no longer 408:
>the market is so small, that's why the PMC-10 and the rfc-1 midigator are
3:
PMC-10 10:
Subject: PMC-10 26:
>recommendation is to pick up a used Digitech PMC-10. I got mine for $100,
Limit of 5 matched lines per file exceeded...
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10 31:
As far as the PMC-10 crashes, I've heard that too but not experienced it.
Limit of 5 matched lines per file exceeded...
199712/msg00369:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
3:
Re: PMC-10 10:
Subject: Re: PMC-10 38:
>I'd love to check out a PMC-10, but I think the problem there is finding
Limit of 5 matched lines per file exceeded...
199712/msg00340:ccMail SMTPLINK Undeliverable Message
45:
Subject: Re: PMC-10 74:
I'd love to check out a PMC-10, but I think the problem there is finding 103:
most affordable but maybe not as roadworthy units (PMC-10) is no longer 107:
the market is so small, that's why the PMC-10 and the rfc-1 midigator are
Limit of 5 matched lines per file exceeded...
199712/msg00395:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
100:
Re: PMC-10, December 18, 1997 161:
Re: FC200, PC1600x (was re: PMC-10), December 26, 1997 164:
Re: FC200, PC1600x (was re: PMC-10), December 25, 1997 165:
Re: FC200, PC1600x (was re: PMC-10), December 21, 1997
Limit of 5 matched lines per file exceeded...
3:
RE: PMC-10 10:
Subject: RE: PMC-10
Limit of 5 matched lines per file exceeded...
199712/msg00346:ccMail SMTPLINK Undeliverable Message
702:
Subject: Re: PMC-10 731:
I'd love to check out a PMC-10, but I think the problem there is finding 760:
most affordable but maybe not as roadworthy units (PMC-10) is no longer 764:
the market is so small, that's why the PMC-10 and the rfc-1 midigator are
199712/msg00393:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
199712/msg00353:ccMail SMTPLINK Undeliverable Message
79:
Subject: Re: PMC-10 108:
>I'd love to check out a PMC-10, but I think the problem there is finding 163:
>most affordable but maybe not as roadworthy units (PMC-10) is no longer 166:
I do know people using the PMC-10 successfully for international touring.
Limit of 5 matched lines per file exceeded...
199712/msg00345:ccMail SMTPLINK Undeliverable Message
632:
>Subject: Re: PMC-10 662:
>I'd love to check out a PMC-10, but I think the problem there is finding 697:
>most affordable but maybe not as roadworthy units (PMC-10) is no longer 701:
>the market is so small, that's why the PMC-10 and the rfc-1 midigator are
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
199712/msg00394:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
199712/msg00392:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
3:
FC200, PC1600x (was re: PMC-10) 10:
Subject: FC200, PC1600x (was re: PMC-10)
26:
<< Message: Untitled Attachment >> << Message: Re[2]: PMC-10 >> << 30:
Message: Re: PMC-10 >> << Message: ccMail SMTPLINK Undeliverable Message
199712/msg00344:ccMail SMTPLINK Undeliverable Message
653:
Subject: Re: PMC-10 682:
I'd love to check out a PMC-10, but I think the problem there is finding 711:
most affordable but maybe not as roadworthy units (PMC-10) is no longer 715:
the market is so small, that's why the PMC-10 and the rfc-1 midigator are
3:
RE: PMC-10 10:
Subject: RE: PMC-10 53:
effect comes on, press again and it turns off. The PMC-10 and Roctron
Limit of 5 matched lines per file exceeded...
3:
Re[2]: PMC-10 10:
Subject: Re[2]: PMC-10 19:
Methinks this might become a situation where the PMC-10 begins
Limit of 5 matched lines per file exceeded...
199712/msg00321:Re: I Saw Three Chips Come Sailing In...
25:
>recommendation is to pick up a used Digitech PMC-10. I got mine for $100,
199712/msg00375:Re: Re: FC200, PC1600x (was re: PMC-10)
3:
Re: Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
199712/msg00396:Re: FC200, PC1600x (was re: PMC-10)
3:
Re: FC200, PC1600x (was re: PMC-10) 10:
Subject: Re: FC200, PC1600x (was re: PMC-10)
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re[2]: PMC-10 10:
Subject: Re[2]: PMC-10 31:
That said here is what my PMC10 does which is mandatory in any other
Limit of 5 matched lines per file exceeded...
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: Re: PMC-10 10:
Subject: Re: Re: PMC-10
Limit of 5 matched lines per file exceeded...
199801/msg00258:Re: PMC-10 Midi Controller Pedal...
3:
Re: PMC-10 Midi Controller Pedal... 10:
Subject: Re: PMC-10 Midi Controller Pedal... 21:
After our recent discussion of how great the PMC-10 floor pedal is.
Limit of 5 matched lines per file exceeded...
32:
It's part of their Ground Control product line. I use the Digitech PMC-10 36:
sell a memory upgrade which at least approaches the capacity of the PMC-10.
199801/msg00371:Re: ANYONE KNOW THE MIDI PEDAL SCHEME FOR THE ECHOPLEX?
84:
I have a digitech PMC-10 pedal set up to do this, and it works very well. I
498:
Re: PMC-10 again, January 25, 1998 628:
Re: PMC-10 Midi Controller Pedal..., January 20, 1998 691:
Re: PMC-10 again, January 25, 1998 797:
PMC-10 again, January 25, 1998
3:
Re: PMC-10 again 10:
Subject: Re: PMC-10 again 36:
>PMC-10 owners,
Limit of 5 matched lines per file exceeded...
199801/msg00249:Re: ANYONE KNOW THE MIDI PEDAL SCHEME FOR THE ECHOPLEX?
104:
little money. You might want to get something like a Digitech PMC-10, the
3:
PMC-10 again 10:
Subject: PMC-10 again 19:
PMC-10 owners,
Limit of 5 matched lines per file exceeded...
199801/msg00409:Re: ANYONE KNOW THE MIDI PEDAL SCHEME FOR THE ECHOPLEX?
119:
>I have a digitech PMC-10 pedal set up to do this, and it works very well.
3:
Re: PMC-10 again 10:
Subject: Re: PMC-10 again 19:
>PMC-10 owners,
Limit of 5 matched lines per file exceeded...
30:
switch and the effect comes on, press again and it turns off. The PMC-10 52:
> with the PMC-10. But like Miko, if the pmc starts acting up I'd like
199801/msg00382:Re: ANYONE KNOW THE MIDI PEDAL SCHEME FOR THE ECHOPLEX?
103:
>I have a digitech PMC-10 pedal set up to do this, and it works very well.
199801/msg00380:Re: ANYONE KNOW THE MIDI PEDAL SCHEME FOR THE ECHOPLEX?
119:
>I have a digitech PMC-10 pedal set up to do this, and it works very well.
19:
I have a PMC-10 midi floor controller, but for real time tapping, it
20:
program the tap pgm chg into my PMC-10 again and give it another try. I'm 30:
I have a PMC-10 midi floor controller, but for real time tapping, it 35:
the footpedal? I've used the PMC-10 for my echoplex a bit, as well as 38:
plex, but if the PMC-10 caused a delay it must have been pretty small.
Limit of 5 matched lines per file exceeded...
20:
PMC-10 for my echoplex a bit, as well as other typical rack switching, and 23:
the dedicated pedal for the plex, but if the PMC-10 caused a delay it must 32:
>I have a PMC-10 midi floor controller, but for real time tapping, it
21:
PMC-10 for my echoplex a bit, as well as other typical rack switching, and 24:
the dedicated pedal for the plex, but if the PMC-10 caused a delay it must 30:
Well, I'm a little hesitant to take a hard poke at the ol' PMC-10 41:
>I have a PMC-10 midi floor controller, but for real time tapping, it
31:
>PMC-10 for my echoplex a bit, as well as other typical rack switching, and 34:
>the dedicated pedal for the plex, but if the PMC-10 caused a delay it must 43:
>>I have a PMC-10 midi floor controller, but for real time tapping, it
199802/msg00997:Re[2]: Boulder, CO folks (loop content too)
41:
another exp pedal or a knob or a cc toggle on my PMC-10.
199802/msg00525:Re: Oberheim MC3000d (Buy 'em and we'll have World Peace )
37:
Being primarily a guitarist, and since the Digitech PMC-10 is getting
20:
">I have a PMC-10 midi floor controller, but for real time 29:
the footpedal? I've used the PMC-10 for my echoplex a bit, as well as 32:
plex, but if the PMC-10 caused a delay it must have been pretty small. 38:
hard poke at the ol' PMC-10 due to my concern that it might croak on me!
Limit of 5 matched lines per file exceeded...
199803/msg00978:Expression pedals to use with Digitech PMC-10
3:
Expression pedals to use with Digitech PMC-10 10:
Subject: Expression pedals to use with Digitech PMC-10 20:
Sorry for the lack of loop content. I recently found a Digitech PMC-10 new
Limit of 5 matched lines per file exceeded...
199803/msg00992:Re: Which expression pedals with Digitech PMC-10?
3:
Re: Which expression pedals with Digitech PMC-10? 10:
Subject: Re: Which expression pedals with Digitech PMC-10? 21:
>Sorry for the lack of loop content. I recently found a Digitech PMC-10 new
Limit of 5 matched lines per file exceeded...
199803/msg01031:Re[2]: Which expression pedals with Digitech PMC-10?
3:
Re[2]: Which expression pedals with Digitech PMC-10? 10:
Subject: Re[2]: Which expression pedals with Digitech PMC-10?
Limit of 5 matched lines per file exceeded...
199803/msg00994:Re: Expression pedals to use with Digitech PMC-10
3:
Re: Expression pedals to use with Digitech PMC-10 10:
Subject: Re: Expression pedals to use with Digitech PMC-10 21:
>How do you PMC-10 owners use yours in your looping or other setups?
Limit of 5 matched lines per file exceeded...
199803/msg01030:Re: Which expression pedals with Digitech PMC-10?
3:
Re: Which expression pedals with Digitech PMC-10? 10:
Subject: Re: Which expression pedals with Digitech PMC-10? 19:
I've been using the Boss EV5 (3 of 'em) with my PMC-10, LXP15II,
Limit of 5 matched lines per file exceeded...
184:
Re: Expression pedals to use with Digitech PMC-10, March 28, 1998 354:
Which expression pedals with Digitech PMC-10?, March 28, 1998 355:
Expression pedals to use with Digitech PMC-10, March 28, 1998 722:
Re: Which expression pedals with Digitech PMC-10?, March 28, 1998
Limit of 5 matched lines per file exceeded...
199803/msg00991:Which expression pedals with Digitech PMC-10?
3:
Which expression pedals with Digitech PMC-10? 10:
Subject: Which expression pedals with Digitech PMC-10? 20:
Sorry for the lack of loop content. I recently found a Digitech PMC-10 new
Limit of 5 matched lines per file exceeded...
30:
I use the Digitech PMC-10 to send fade messages all the time and have not
30:
for me with my PMC10 Midi controller pedal. All in all, Digitech has
23:
pedal (I use pretty much the same set up but with the Digitech PMC-10 33:
strategy I use on my PMC-10 ( I don't know if its possible on the Ground
23:
Echoplex. I currently control my Jam Men with my PMC-10. How easy is it to 30:
GR-1, a whammy II, the PMC-10, two volume pedals, one expression pedal, and
53:
Digitech PMC-10) and I have to say, the sum total of the resolution of the
199806/msg00206:Re: structured looping interface (was Folk/Celtic Looping)
92:
There are midi foot controllers that can do this. My Digitech PMC-10 has a 100:
PMC-10 may be the best $100 I ever spent.) You can find them used
44:
functions I needed with MIDI continuous controllers from a Digitech PMC-10
199808/msg00402:Re[2]: MIDI continuous controller ideas
19:
The PMC-10 definitely does this... You have 10 footswitches available 60:
I'm not positive on this yet, but I think the Digitech PMC-10 might fill 62:
rehearsals with FingerPaint and will explore this further. The PMC-10 can
199808/msg00379:Re: MIDI continuous controller ideas
35:
I'm not positive on this yet, but I think the Digitech PMC-10 might fill 37:
rehearsals with FingerPaint and will explore this further. The PMC-10 can
51:
some other pedals to look at are the digitech PMC-10, Rocktron AllAccess, 52:
and Roland FC-200. Personally, I like the PMC-10, since it is very
26:
>Personally, I use a Digitech PMC-10, which I think is one of the best midi
30:
>Personally, I use a Digitech PMC-10, which I think is one of the best midi
48:
Personally, I use a Digitech PMC-10, which I think is one of the best midi
3:
PMC10 BulkDump 10:
Subject: PMC10 BulkDump 21:
Yesterday I lost all the patches in my PMC10, luckily though I'd
19:
Merry Christmas,Mike! Got the PMC-10 manual today. And I can't thank you
22:
> the PMC-10 and seeing all the presets and the bank layouts on a computer
415:
PMC-10 editor/librarian, December 30, 1998 554:
PMC10 BulkDump, December 23, 1998
26:
programmer. It's the only way to get what is in the PMC-10 out. I haven't 30:
the PMC-10 and seeing all the presets and the bank layouts on a computer
20:
> the PMC-10 and seeing all the presets and the bank layouts on a computer
3:
PMC-10 editor/librarian 10:
Subject: PMC-10 editor/librarian 19:
to the folks who were asking about pmc-10 editors:
Limit of 5 matched lines per file exceeded...
199902/msg00425:Re: Digitech PMC 10 software [non-loop content]
22:
and found the link you've included for the PMC-10 editor and it takes
625:
PMC10/GR1 Sysex, February 05, 1999
3:
PMC10/GR1 Sysex 10:
Subject: PMC10/GR1 Sysex 21:
a sysex message from my PMC10 to a Roland GR-1 which would toggle the
32:
either unit or both at the same time via a PMC-10. If you run the MIDI
199903/msg00352:Re: Custom Echoplex switching pedals...any interest?
48:
my midi pedal does this, no problem. (digitech PMC-10) Any pedal that can
199903/msg00384:Re: Custom Echoplex switching pedals...any interest?
49:
my midi pedal does this, no problem. (digitech PMC-10) Any pedal that can
199903/msg00355:Re: Custom Echoplex switching pedals...any interest?
48:
>my midi pedal does this, no problem. (digitech PMC-10) Any pedal that can
25:
It's been quite a while since I programmed my PMC-10 to control jam men, but I think you may need to either add 1 or subtract 1 from the program change # listed in the Lexicon manual. Try this with one of the MIDI fades messages. Besides hearing the audio fade the jammer will have three dots come on in the display to let you know it is fading.
49:
> can't seem to find a PMC10 (as advertised on the Looper's Delight Web
199907/msg00085:Re: WTB: Digitech PMC10 MIDI Foot Controller
3:
Re: WTB: Digitech PMC10 MIDI Foot Controller 10:
Subject: Re: WTB: Digitech PMC10 MIDI Foot Controller
Limit of 5 matched lines per file exceeded...
199907/msg00045:WTB: Digitech PMC10 MIDI Foot Controller
3:
WTB: Digitech PMC10 MIDI Foot Controller 10:
Subject: WTB: Digitech PMC10 MIDI Foot Controller
199907/msg00089:Re: WTB: Digitech PMC10 MIDI Foot Controller
3:
Re: WTB: Digitech PMC10 MIDI Foot Controller 10:
Subject: Re: WTB: Digitech PMC10 MIDI Foot Controller
Limit of 5 matched lines per file exceeded...
199907/msg00071:Re: WTB: Digitech PMC10 MIDI Foot Controller
3:
Re: WTB: Digitech PMC10 MIDI Foot Controller 10:
Subject: Re: WTB: Digitech PMC10 MIDI Foot Controller
Limit of 5 matched lines per file exceeded...
199907/msg00105:Re: WTB: Digitech PMC10 MIDI Foot Controller
3:
Re: WTB: Digitech PMC10 MIDI Foot Controller 10:
Subject: Re: WTB: Digitech PMC10 MIDI Foot Controller
289:
Re: WTB: Digitech PMC10 MIDI Foot Controller, July 04, 1999 291:
WTB: Digitech PMC10 MIDI Foot Controller, July 02, 1999 292:
Re: WTB: Digitech PMC10 MIDI Foot Controller, July 03, 1999 385:
Re: WTB: Digitech PMC10 MIDI Foot Controller, July 04, 1999
Limit of 5 matched lines per file exceeded...
22:
On my PMC-10 I regularly use an entire bank for control of my Waldorf
29:
with my PMC-10, but this sounds like anothe rpossibility. Perhaps somewhat
199908/msg00015:Re: Re[2]: Live Real Time Guitar Effects
42:
> tuning this sort of patch. I use an old Digitech PMC-10 midi floor
23:
>On my PMC-10 I regularly use an entire bank for control of my Waldorf 49:
Or, if you had a REAL midi pedal, like say a digitech PMC-10, it would have
199908/msg00014:Re[2]: Live Real Time Guitar Effects
30:
tuning this sort of patch. I use an old Digitech PMC-10 midi floor
34:
> RP20, but since my bad experience with the PMC10 and their product
22:
getting pissed off by my Digitech's PMC10 MIDI footcontroller going dead 39:
RP20, but since my bad experience with the PMC10 and their product
199908/msg00107:Re: MIDI Foot Controllers and Us (slightly off-topic)
33:
wish they still made the PMC-10 I keep hearing about.
3:
Still WTB: Digitech PMC10 10:
Subject: Still WTB: Digitech PMC10
199908/msg00067:Re[2]: Continuous Control & Rolls
39:
move. The PMC-10 allows you to assign and scale up to 3 cc's per pedal.
233:
Still WTB: Digitech PMC10, August 04, 1999
23:
can't seem to find a PMC10 (as advertised on the Looper's Delight Web
34:
floor controller as well... a Digitech PMC-10. At first I thought 40:
I program one button on the PMC-10 to call the first patch in a bank
20:
Access and Digitech PMC-10 can be used to send all variety of midi
199908/msg00115:Re: MIDI Foot Controllers and Us (slightly off-topic)
32:
be the Rocktron AllAccess, Digitech PMC-10, and Roland FC-200. I think the 39:
limited memory. The digitech pmc-10 is just right - cheap used, full
199908/msg00099:Re[2]: Continuous Control & Rolls
35:
more than cc's and pgm chg's. Thank goodness for the PMC-10!
3:
Re: PMC10 sells for $355.00 10:
Subject: Re: PMC10 sells for $355.00 27:
The auction for the Digitech PMC10 that was on ebay just ended.
68:
> > Contemplating selling my EDP and PMC-10 footpedal, I researched Ebay
3:
PMC10 sells for $355.00 10:
Subject: PMC10 sells for $355.00 19:
The auction for the Digitech PMC10 that was on ebay just ended. Ended up
Limit of 5 matched lines per file exceeded...
38:
selling my EDP and PMC-10 footpedal, I researched Ebay and found that on 9/7
199909/msg00156:Re: PMC10 sells for $355.00 + ATTN ALL BRITS
3:
Re: PMC10 sells for $355.00 + ATTN ALL BRITS 10:
Subject: Re: PMC10 sells for $355.00 + ATTN ALL BRITS 20:
2101 list the other day. A PMC-10 owner responded that
Limit of 5 matched lines per file exceeded...
497:
Re: PMC10 sells for $355.00 + ATTN ALL BRITS, September 09, 1999 584:
Re: PMC10 sells for $355.00 + ATTN ALL BRITS, September 09, 1999 771:
Re: PMC10 sells for $355.00, September 09, 1999 957:
PMC10 sells for $355.00, September 09, 1999
20:
Contemplating selling my EDP and PMC-10 footpedal, I researched Ebay and
199909/msg00157:Re: PMC10 sells for $355.00 + ATTN ALL BRITS
3:
Re: PMC10 sells for $355.00 + ATTN ALL BRITS 10:
Subject: Re: PMC10 sells for $355.00 + ATTN ALL BRITS
Limit of 5 matched lines per file exceeded...
23:
I've updated the Digitech PMC10 software I announced earlier this year.
199910/msg00681:OT - Re: Live Gig LOOPING Rig Logistics
44:
with the PMC10 midi controller and 3 ExPeds as well as 4 FS5U's for
3:
Re: Help My PMC10!! 10:
Subject: Re: Help My PMC10!! 35:
Okay, so I was the crazy one who paid $107.50 for the "wounded" PMC10
Limit of 5 matched lines per file exceeded...
199910/msg00367:Re: FS: Time Machine, PMC 10 (ebay)
21:
PMC10. I picked one up for $10 and it does work (but all the button lables
3:
Re: Help My PMC10!! 10:
Subject: Re: Help My PMC10!!
Limit of 5 matched lines per file exceeded...
24:
PMC10 because it betrayed me so many times. Now i´m looking for one with similar
199910/msg00373:Re: FS: Time Machine, PMC 10 (ebay)
21:
Does that windows software to control the PMC10 work nicely? Sounds
21:
no note on/note off stuff. Apparently, the PMC10 is the one to have for 33:
I need an advice on foot controllers. I sold my PMC10 because it betrayed
155:
Re: Help My PMC10!!, October 28, 1999 306:
Help My PMC10!!, October 28, 1999 836:
looking for a footcontroller like the PMC10 but reliable, October 26, 1999 955:
Re: Help My PMC10!!, October 28, 1999
199910/msg00568:looking for a footcontroller like the PMC10 but reliable
3:
looking for a footcontroller like the PMC10 but reliable 10:
Subject: looking for a footcontroller like the PMC10 but reliable
3:
Help My PMC10!! 10:
Subject: Help My PMC10!! 23:
the "wounded" PMC10 on Ebay. I really wanted one, and resurrecting this one
Limit of 5 matched lines per file exceeded...
199910/msg00362:Re: FS: Time Machine, PMC 10 (ebay)
19:
Just so you know, this PMC10 does not have the remote controller (and is
34:
> no note on/note off stuff. Apparently, the PMC10 is the one to have for 44:
> I need an advice on foot controllers. I sold my PMC10 because it
199910/msg00370:Re: FS: Time Machine, PMC 10 (ebay)
24:
I had a couple of the PMC-10 controllers and when Digitech said they 28:
old flakey PMC-10 controllers. I took them both apart and used DeOxit on 31:
up eventually, but now I have a second PMC-10 which I'd like a controller 37:
>the PMC-10 I don't like...eventually I'm going to rebuild my remote
199910/msg00365:Re: FS: Time Machine, PMC 10 (ebay)
20:
>Just so you know, this PMC10 does not have the remote controller (and is 28:
(especially the dinky cable it uses.) That's the one thing about the PMC-10
199911/msg00673:PMC10 Programmer Schematic Questions
3:
PMC10 Programmer Schematic Questions 10:
Subject: PMC10 Programmer Schematic Questions 22:
To my fellow PMC10 users:
Limit of 5 matched lines per file exceeded...
199911/msg00650:Re: One MIDI Controller for multiple Loopers
38:
I control two jam men and two echoplexi from my PMC-10. I have them set up 41:
since the PMC-10 allows you to transmit over more than one MIDI channel at
199911/msg00171:Re: Alternative to Vortex / Expression Pedals...
22:
Regarding midi... I use EV-5's with my PMC-10 and they've been just 26:
pedal board with 5 or 6 ExPeds on a small riser right behind my PMC-10...
170:
Re: Digitech PMC-10 Foot Controller & Programmer, November 15, 1999 333:
PMC10 Programmer Schematic Questions, November 24, 1999 389:
Digitech PMC-10 Foot Controller & Programmer, November 11, 1999 867:
Re: Digitech PMC-10 Foot Controller & Programmer, November 14, 1999
Limit of 5 matched lines per file exceeded...
199911/msg00386:Re: Digitech PMC-10 Foot Controller & Programmer
3:
Re: Digitech PMC-10 Foot Controller & Programmer 10:
Subject: Re: Digitech PMC-10 Foot Controller & Programmer 42:
I've been using the PMC-10 successfully for years with no loss of
Limit of 5 matched lines per file exceeded...
199911/msg00376:Re: Digitech PMC-10 Foot Controller & Programmer
3:
Re: Digitech PMC-10 Foot Controller & Programmer 10:
Subject: Re: Digitech PMC-10 Foot Controller & Programmer 28:
I've been using the PMC-10 successfully for years with no loss of
Limit of 5 matched lines per file exceeded...
199911/msg00375:Re: Digitech PMC-10 Foot Controller & Programmer
3:
Re: Digitech PMC-10 Foot Controller & Programmer 10:
Subject: Re: Digitech PMC-10 Foot Controller & Programmer
Limit of 5 matched lines per file exceeded...
199911/msg00325:Digitech PMC-10 Foot Controller & Programmer
3:
Digitech PMC-10 Foot Controller & Programmer 10:
Subject: Digitech PMC-10 Foot Controller & Programmer 21:
Anyone interested in buying Digitech PMC-10 Foot Controller & Programmer
Limit of 5 matched lines per file exceeded...
199911/msg00388:Re: Digitech PMC-10 Foot Controller & Programmer
3:
Re: Digitech PMC-10 Foot Controller & Programmer 10:
Subject: Re: Digitech PMC-10 Foot Controller & Programmer 24:
meet RAYMOND the PMC10 dumper/editor at
Limit of 5 matched lines per file exceeded...
3:
PMC-10 10:
Subject: PMC-10 20:
Can you explain, what is PMC-10 and where can I get information about it
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10 39:
>>>Subject: PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10 32:
>>Subject: PMC-10
Limit of 5 matched lines per file exceeded...
3:
PMC-10 10:
Subject: PMC-10 19:
thought there used to be a picture of the PMC-10 on Loopers D , now I cant
Limit of 5 matched lines per file exceeded...
25:
That said, I still LOVE my PMC-10!
199912/msg00626:Anyone have a pic of the PMC-10 ?
3:
Anyone have a pic of the PMC-10 ? 10:
Subject: Anyone have a pic of the PMC-10 ?
199912/msg00636:Re: Anyone have a pic of the PMC-10 ?
3:
Re: Anyone have a pic of the PMC-10 ? 10:
Subject: Re: Anyone have a pic of the PMC-10 ?
199912/msg00371:Alto Music doesn't have any PMC-10's - I'm still looking for one
3:
Alto Music doesn't have any PMC-10's - I'm still looking for one 10:
Subject: Alto Music doesn't have any PMC-10's - I'm still looking for one 19:
I talked with Jon from Alto Music today, he doesn't have any PMC-10's.
Limit of 5 matched lines per file exceeded...
199912/msg00235:WTB: Digitech PMC-10 midi foot controller
3:
WTB: Digitech PMC-10 midi foot controller 10:
Subject: WTB: Digitech PMC-10 midi foot controller
3:
PMC-10 10:
Subject: PMC-10 23:
>Subject: PMC-10
Limit of 5 matched lines per file exceeded...
58:
Re: PMC-10, December 08, 1999 62:
Re: PMC-10, December 07, 1999 322:
WTB: Digitech PMC-10 midi foot controller, December 04, 1999 323:
Alto Music doesn't have any PMC-10's - I'm still looking for one, December 08, 1999
Limit of 5 matched lines per file exceeded...
28:
I personally have a Digitech PMC-10 which allows you to program two
3:
Re: PMC-10 10:
Subject: Re: PMC-10
Limit of 5 matched lines per file exceeded...
3:
PMC-10 picture? 10:
Subject: PMC-10 picture? 19:
How does PMC-10 look like? Is there any picture of it anywhere?
3:
Re: PMC-10 10:
Subject: Re: PMC-10 35:
Kim so kindly led us to PMC-10's (I've got two so they're all
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10 21:
>Can you explain, what is PMC-10 and where can I get information about it
Limit of 5 matched lines per file exceeded...
3:
Re: PMC-10 10:
Subject: Re: PMC-10
Limit of 5 matched lines per file exceeded...
25:
features that the discontinued Digitech PMC10 had which is what i am
1018:
PMC-10, ebay, February 04, 2000
3:
PMC-10, ebay 10:
Subject: PMC-10, ebay
3:
Digitech PMC-10 programming pad? 10:
Subject: Digitech PMC-10 programming pad? 19:
So....I done got me one-a-dem Digitech PMC-10 midi
Limit of 5 matched lines per file exceeded...
200003/msg00571:Re: Digitech PMC-10 >> Yamaha MFC10
3:
Re: Digitech PMC-10 >> Yamaha MFC10 10:
Subject: Re: Digitech PMC-10 >> Yamaha MFC10
3:
Re: Digitech PMC-10 sysex woes 10:
Subject: Re: Digitech PMC-10 sysex woes
Limit of 5 matched lines per file exceeded...
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 20:
>There must be a reason why the PMC-10 is so sought after- why?
Limit of 5 matched lines per file exceeded...
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 31:
> >There must be a reason why the PMC-10 is so sought after- why?
Limit of 5 matched lines per file exceeded...
200003/msg00505:Re: Digitech PMC-10 programming pad?
3:
Re: Digitech PMC-10 programming pad? 10:
Subject: Re: Digitech PMC-10 programming pad?
Limit of 5 matched lines per file exceeded...
3:
Digitech PMC-10 sysex woes 10:
Subject: Digitech PMC-10 sysex woes 25:
I can see that the sysex is getting to the PMC-10 'cuz
Limit of 5 matched lines per file exceeded...
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 27:
Subject: RE: Digitech PMC-10
Limit of 5 matched lines per file exceeded...
200003/msg00501:Re: Digitech PMC-10 programming pad?
3:
Re: Digitech PMC-10 programming pad? 10:
Subject: Re: Digitech PMC-10 programming pad?
Limit of 5 matched lines per file exceeded...
200003/msg00516:Re: Digitech PMC-10 programming pad?
3:
Re: Digitech PMC-10 programming pad? 10:
Subject: Re: Digitech PMC-10 programming pad?
Limit of 5 matched lines per file exceeded...
186:
Re: Digitech PMC-10 programming pad?, March 22, 2000 189:
Re: Digitech PMC-10 programming pad?, March 22, 2000 207:
Re: Digitech PMC-10, March 23, 2000 329:
Re: Digitech PMC-10, March 23, 2000
Limit of 5 matched lines per file exceeded...
200003/msg00586:Re: Digitech PMC-10 >> Yamaha MFC10 >> Big Briar
3:
Re: Digitech PMC-10 >> Yamaha MFC10 >> Big Briar 10:
Subject: Re: Digitech PMC-10 >> Yamaha MFC10 >> Big Briar
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 21:
reason why the PMC-10 is so sought after- why?
Limit of 5 matched lines per file exceeded...
3:
RE: Digitech PMC-10 10:
Subject: RE: Digitech PMC-10 26:
> I'm not an expert on the capabilities of the PMC-10, but I own a Yamaha
Limit of 5 matched lines per file exceeded...
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 28:
> > I'm not an expert on the capabilities of the PMC-10, but I own a Yamaha
Limit of 5 matched lines per file exceeded...
3:
Re: Digitech PMC-10 10:
Subject: Re: Digitech PMC-10 30:
I'm not an expert on the capabilities of the PMC-10, but I own a Yamaha
Limit of 5 matched lines per file exceeded...
200003/msg00580:Re: Digitech PMC-10 >> Yamaha MFC10
3:
Re: Digitech PMC-10 >> Yamaha MFC10 10:
Subject: Re: Digitech PMC-10 >> Yamaha MFC10 27:
my purchase. I was also looking at the PMC-10, which I kept seeing go for
Limit of 5 matched lines per file exceeded...
200003/msg00498:Re: Digitech PMC-10 programming pad?
3:
Re: Digitech PMC-10 programming pad? 10:
Subject: Re: Digitech PMC-10 programming pad? 22:
Raymond the pmc10 editor for pc
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 foot pedal? 10:
Subject: Re: PMC10 foot pedal? 47:
pmc10 unless I can somehow clean up it's interaction
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 foot pedal? 10:
Subject: Re: PMC10 foot pedal? 21:
the fc7 works indeed with the pmc10 (I have two for that)
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 foot pedal? 10:
Subject: Re: PMC10 foot pedal? 28:
Subject: PMC10 foot pedal?
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 foot pedal? 10:
Subject: Re: PMC10 foot pedal? 31:
Subject: Re: PMC10 foot pedal?
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 foot pedal? 10:
Subject: Re: PMC10 foot pedal? 25:
the pmc10 (uh, do I *really* have to appologize for my
Limit of 5 matched lines per file exceeded...
194:
Re: PMC10 foot pedal?, April 01, 2000 476:
Re: PMC10 foot pedal?, April 02, 2000 481:
Re: PMC10 foot pedal?, April 04, 2000 1346:
Re: PMC10 foot pedal?, April 02, 2000
Limit of 5 matched lines per file exceeded...
3:
PMC10 foot pedal? 10:
Subject: PMC10 foot pedal? 19:
Now that I have my program-pad-less pmc10 foot pedal
Limit of 5 matched lines per file exceeded...
200006/msg00200:Dual pedal control on EDP; also wish list
21:
together in anticipation. This was the first time I tried using my PMC-10
41:
I'm using the Digitech PMC-10 (so far so good) to access my JamMan
61:
> I'm using the Digitech PMC-10 (so far so good) to access my JamMan
24:
Your posts are most helpful. We also have obtained an older pmc-10 and
33:
Digitech PMC-10, Rocktron AllAccess, Roland FC-200, lake butler midigator
200008/msg00632:Re: Ernie Ball (was Volume Pedal Question)
35:
> Echoplex or PMC-10).
200008/msg00628:Ernie Ball (was Volume Pedal Question)
200008/msg00641:Re: Footpedals (was Rampant Elitism)
44:
> resurrect the PMC-10?
200008/msg00625:Re: Footpedals (was Rampant Elitism)
32:
> What exactly would it take to resurrect the PMC-10? 34:
I wish I knew... I've got two PMC-10's and wish there were some ongoing
200008/msg00629:RE: Ernie Ball (was Volume Pedal Question)
32:
> Echoplex or PMC-10).
200008/msg00645:Re: Footpedals (was Rampant Elitism)
46:
> > What exactly would it take to resurrect the PMC-10? 48:
> I wish I knew... I've got two PMC-10's and wish there were some ongoing
31:
going to be limited to maybe 2 or 3 controllers. The PMC-10 does all of 59:
resurrect the PMC-10?
200008/msg00642:Re: Footpedals (was Rampant Elitism)
39:
> > What exactly would it take to resurrect the PMC-10?
24:
I guess other choices besides the Digitech PMC-10 are the Lake-Butler
39:
going to be limited to maybe 2 or 3 controllers. The PMC-10 does all of
32:
>large market for a PMC-10 type of foot controller, i.e., a very
3:
Re: Pmc10 remote fix 10:
Subject: Re: Pmc10 remote fix 25:
Subject: Pmc10 remote fix
Limit of 5 matched lines per file exceeded...
32:
large market for a PMC-10 type of foot controller, i.e., a very general
185:
Pmc10 remote fix, September 23, 2000 368:
Re: Pmc10 remote fix, September 24, 2000
200009/msg00687:Re: OT: PCM-10 mimmicing an FC-200
43:
ultimate and only PMC10 editor: get it for free at
3:
Pmc10 remote fix 10:
Subject: Pmc10 remote fix 22:
controler buttons of the pmc10
Limit of 5 matched lines per file exceeded...
200010/msg00555:Digitech PMC-10 Midi Foot Controller Pedal available on Ebay
3:
Digitech PMC-10 Midi Foot Controller Pedal available on Ebay 10:
Subject: Digitech PMC-10 Midi Foot Controller Pedal available on Ebay 23:
Digitech PMC-10 Midi Foot Controller Pedal
Limit of 5 matched lines per file exceeded...
21:
The PMC-10 can send two midi strings per pedal, not two program changes. 29:
If you wanted, you can program a PMC-10 pedal up upload 36:
The only other thing that beats the PMC-10 is the Rocktron All Access 66:
allows for 5 simultaneous program changes per button. Although the PMC10
200010/msg00506:Digitech PMC-10 Midi Foot Controller Pedal available on Ebay
3:
Digitech PMC-10 Midi Foot Controller Pedal available on Ebay 10:
Subject: Digitech PMC-10 Midi Foot Controller Pedal available on Ebay 23:
Digitech PMC-10 Midi Foot Controller Pedal
Limit of 5 matched lines per file exceeded...
40:
>PMC10 is highly 51:
The only pedal that could replace pmc10 in everything is the rocktron
202:
Digitech PMC-10 Midi Foot Controller Pedal available on Ebay, October 31, 2000 203:
Digitech PMC-10 Midi Foot Controller Pedal available on Ebay, October 26, 2000
47:
> digitech pmc-10, roland fc-200, yamaha mfc-10, Phil Rees MM5, etc.
200010/msg00125:Re: EDP: Can the EDP be controlled? (midi)
26:
digitech pmc-10, etc. The dumbed-down pedals that only send program change
29:
digitech pmc-10, roland fc-200, yamaha mfc-10, Phil Rees MM5, etc.
36:
allows for 5 simultaneous program changes per button. Although the PMC10
200011/msg00051:Echoplex and PMC-10--the "Undo Bomb" (This is Cool!)
3:
Echoplex and PMC-10--the "Undo Bomb" (This is Cool!) 10:
Subject: Echoplex and PMC-10--the "Undo Bomb" (This is Cool!) 22:
control the EDP by other means--that includes the PMC-10, and I have
Limit of 5 matched lines per file exceeded...
200011/msg00141:RE: Ibanez EPP400 Effect Patching Programmer available on EBAY
29:
Sorry to anyone who lost their bid on my PMC-10.
27:
the PMC-10 can do) I'd be happy to send you a manual of the PMC-10 for
272:
Echoplex and PMC-10--the "Undo Bomb" (This is Cool!), November 03, 2000 567:
Re: Echoplex and PMC-10--the "Undo Bomb" (This is Cool!), November 03, 2000
200011/msg00078:Re: Echoplex and PMC-10--the "Undo Bomb" (This is Cool!)
3:
Re: Echoplex and PMC-10--the "Undo Bomb" (This is Cool!) 10:
Subject: Re: Echoplex and PMC-10--the "Undo Bomb" (This is Cool!) 23:
>control the EDP by other means--that includes the PMC-10, and I have
Limit of 5 matched lines per file exceeded...
200012/msg00059:A Most Bitchin' Application of the PMC-10 Foot Controller
3:
A Most Bitchin' Application of the PMC-10 Foot Controller 10:
Subject: A Most Bitchin' Application of the PMC-10 Foot Controller 20:
I found another great looping application of the PMC-10 by Digitech! With
310:
A Most Bitchin' Application of the PMC-10 Foot Controller, December 05, 2000
200101/msg00900:EDP finally arrived (in Switzerland)
29:
your PMC10 patches for controlling the unit as I'm not getting the
22:
key binding for play. The PMC-10 has a 1/4" input jack so I can start/stop 26:
Anyway, the PMC-10 has much flexibility in its configuration, so I have 38:
I start the machine from the PMC-10 (pedal F). I usually use the EDP pedal
200102/msg00434:Re: Sync SR-16 With Echoplex-- Saga Update
68:
>>Perhaps I'll try the PMC-10 - if it will start both functions
200102/msg00307:RE: Midi Control + JamMan + straight into overdub
20:
have an MFC10 and also a PMC-10 and I would like to make a side by side
200102/msg00338:Re: Midi Control + JamMan + straight into overdub
23:
Since the pmc10 isn't being produced, does anyone have any knowledge of
200102/msg00423:Re: Sync SR-16 With Echoplex--Also! Change patterns thru MIDI
49:
>Perhaps I'll try the PMC-10 - if it will start both functions
200102/msg00410:Re: Sync SR-16 With Echoplex--Also! Change patterns thru MIDI (sort of long)
33:
and get yourself "Raymond" _THE ONLY_ pmc10 software editor by one of
200102/msg00553:Re: For Sale, I think: Echoplex Digital Pro Foot Controller
24:
> button switch method along with my PMC-10 MIDI thang--anybody interested?
200102/msg00504:RE: Sherman Oaks (was: la loopers?)
30:
| Looping guitar and Starr Labs Ztar with an Echoplex and PMC-10
200102/msg00417:Re: Sync SR-16 With Echoplex--Also! Change patterns thru MIDI (sort of long)
24:
Perhaps I'll try the PMC-10 - if it will start both functions 45:
>I am doing this--sort of. I use the PMC-10 by Digitech to send a variety
200102/msg00548:For Sale, I think: Echoplex Digital Pro Foot Controller
22:
button switch method along with my PMC-10 MIDI thang--anybody interested?
21:
I wasn't sure if my PMC10 or MFC10 were in the simple minded category or
200102/msg00409:Sync SR-16 With Echoplex--Also! Change patterns thru MIDI (sort of long)
27:
I am doing this--sort of. I use the PMC-10 by Digitech to send a variety
200102/msg00438:Re: Sync SR-16 With Echoplex-- Saga Update
72:
>>>Perhaps I'll try the PMC-10 - if it will start both functions
21:
Looping guitar and Starr Labs Ztar with an Echoplex and PMC-10
200102/msg00315:RE: Midi Control + JamMan + straight into overdub
21:
> have an MFC10 and also a PMC-10 and I would like to make a side by side 30:
Please let me know if the PMC-10 is faster, I'm going to check it's
3:
RE: PMC10 Q's 10:
Subject: RE: PMC10 Q's 30:
> into the PMC10
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10 29:
>PMC10)
Limit of 5 matched lines per file exceeded...
39:
> the plan is to velcro the two FS300s to the face of the PMC-10. What
3:
Expression pedal with PMC10 10:
Subject: Expression pedal with PMC10 19:
What kind of expression pedals are most using with the PMC10? Also, does
Limit of 5 matched lines per file exceeded...
3:
RE: PMC10 Q's 10:
Subject: RE: PMC10 Q's 58:
> and the new pedal. in other words, the PMC10 will switch alternately
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 Q's 10:
Subject: Re: PMC10 Q's
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 Q's 10:
Subject: Re: PMC10 Q's
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10 35:
>PMC10)
Limit of 5 matched lines per file exceeded...
3:
RE: PMC10 Q's 10:
Subject: RE: PMC10 Q's 21:
soldering and no modifications of either the pmc10 or the 5-7 cable
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 Worries 10:
Subject: Re: PMC10 Worries
19:
the ones I know of are: digitech PMC-10, rocktron AllAccess, roland FC-200,
3:
RE: Expression pedal with PMC10 10:
Subject: RE: Expression pedal with PMC10 27:
PMC10)
Limit of 5 matched lines per file exceeded...
3:
PMC10 and Raymond editor 10:
Subject: PMC10 and Raymond editor 20:
think?) for the PMC10 footcontroller? I have tried downloading it from the
26:
"Undo bomb" pedal setting on my PMC-10 which strips away several layers all at
3:
Re: PMC10 Q's 10:
Subject: Re: PMC10 Q's 32:
and the new pedal. in other words, the PMC10 will switch alternately
Limit of 5 matched lines per file exceeded...
230:
Re: Expression pedal with PMC10, March 31, 2001 344:
Re: PMC10 Q's, March 28, 2001 454:
PMC10 Worries, March 23, 2001 460:
Re: PMC10 Q's, March 23, 2001
Limit of 5 matched lines per file exceeded...
200103/msg00570:Recording MIDI data into a foot controller
200103/msg00565:My Foot Controller vs Your New Foot Controller
19:
I am reprogramming my PMC-10 (Digitech) and it sure is a touchy thing! The
3:
Re: PMC10 Q's 10:
Subject: Re: PMC10 Q's 21:
> soldering and no modifications of either the pmc10 or the 5-7 cable
Limit of 5 matched lines per file exceeded...
200103/msg00569:Your New Foot Controller Yamaha mfc-10
67:
> I am reprogramming my PMC-10 (Digitech) and it sure is a touchy
3:
PMC10 Worries 10:
Subject: PMC10 Worries 20:
Steve wonders how to save info from the PMC-10 to use at a gig. He asks
Limit of 5 matched lines per file exceeded...
3:
RE: PMC10 Q's 10:
Subject: RE: PMC10 Q's 45:
> and the new pedal. in other words, the PMC10 will switch alternately
Limit of 5 matched lines per file exceeded...
26:
the plan is to velcro the two FS300s to the face of the PMC-10. What fun!
200103/msg00575:PMC10 Q's was Re: Your New Foot Controller Yamaha mfc-10
3:
PMC10 Q's was Re: Your New Foot Controller Yamaha mfc-10 10:
Subject: PMC10 Q's was Re: Your New Foot Controller Yamaha mfc-10 26:
Does anyone know if the PMC10 can be modified to use phantom power (for
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 Q's 10:
Subject: Re: PMC10 Q's 21:
from Radio Shack to hook up the power plug on the 5 pin end into the PMC10
Limit of 5 matched lines per file exceeded...
200104/msg00149:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10 40:
> What kind of expression pedals are most using with the PMC10? Also, does
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10
Limit of 5 matched lines per file exceeded...
200104/msg00134:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
200104/msg00140:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4 29:
>Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
19:
I bought a pmc-10 that didn't have a programming pad.
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 programming 10:
Subject: Re: PMC10 programming 19:
i don't know about the pmc10,
Limit of 5 matched lines per file exceeded...
200104/msg00250:Re: OT: PMC Foot Switch Adjustments
41:
>I find that the individual switches on the PMC-10 react differently to the
3:
RE: PMC10 programming 10:
Subject: RE: PMC10 programming 30:
> Subject: OT: PMC10 programming
Limit of 5 matched lines per file exceeded...
3:
OT: PMC10 programming 10:
Subject: OT: PMC10 programming 20:
where there is such a concentration of PMC10 users. If it would please
Limit of 5 matched lines per file exceeded...
274:
Re: Expression pedal with PMC10, April 03, 2001 275:
Re: Expression pedal with PMC10, April 04, 2001 277:
RE: Expression pedal with PMC10 & DL4, April 05, 2001 338:
RE: Expression pedal with PMC10 & DL4, April 05, 2001
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10 24:
What kind of expression pedals are most using with the PMC10? Also, does
Limit of 5 matched lines per file exceeded...
22:
I find that the individual switches on the PMC-10 react differently to the
200104/msg00143:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
200104/msg00148:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
200104/msg00150:RE: Expression pedal with PMC10 & DL4
3:
RE: Expression pedal with PMC10 & DL4 10:
Subject: RE: Expression pedal with PMC10 & DL4
Limit of 5 matched lines per file exceeded...
3:
Re: Expression pedal with PMC10 10:
Subject: Re: Expression pedal with PMC10
Limit of 5 matched lines per file exceeded...
200104/msg00502:Re: Digitec IPS 33B Urgently Required
23:
to keep the handheld programmer which works on my PMC-10!
200105/msg00302:RE: jamman footswitch..another jam-thread!
19:
Hi Dan... I'm with you on this issue. I found the PMC-10 midi controller's
200105/msg00116:mfc10 sends sysex? other foot controllers?
28:
Digitech PMC-10 - rare and not reliable according to posts.
200105/msg00117:Re: mfc10 sends sysex? other foot controllers?
24:
>Digitech PMC-10 - rare and not reliable according to posts. 28:
relatively easy to program. The PMC-10 is flimsy.
200105/msg00309:RE: jamman footswitch..another jam-thread!
20:
>Hi Dan... I'm with you on this issue. I found the PMC-10 midi controller's 25:
i don't think it's an issue with the pmc-10, or with midi for that matter.
200105/msg00323:RE: jamman footswitch >> midi controllers
20:
>> Hi Dan... I'm with you on this issue. I found the PMC-10 midi 25:
> i don't think it's an issue with the pmc-10, or with midi for that 32:
That's why I don't have a JamMan anymore. 8-) I've used the PMC-10 for
30:
pmc-10, rocktron AllAccess, lake-butler midigator, roland fc-200, yamaha
22:
five registers has always been enough for me...( the repeater may change that...) i am trying to figure out what gives the pmc-10 ti's "greater flexibility" do tell... and i don;t know max (except by reputation in "where the wild things are"...) i have a couple of powerbooks, tho... 36:
I agree that it is a solid and flexible piece of gear. My major complaint is that it has only five registers per bank (lots of banks though). The Digitech PMC-10 (also discontinued) has much greater flexibility but is extremely fragile. The switches in particular are funky and easy to break, and replacement parts are not to be had.
200108/msg00169:Re: Echoplex: Fun with the PMC-10
3:
Re: Echoplex: Fun with the PMC-10 10:
Subject: Re: Echoplex: Fun with the PMC-10 24:
> It uses the PMC-10, a MIDI controller, so it's not for everyone--
Limit of 5 matched lines per file exceeded...
3:
OT: Digitech PMC10 FS 10:
Subject: OT: Digitech PMC10 FS
23:
the PMC10. Has anyone heard if Electrix plans on releasing a more full
3:
RE: Digitech PMC10 FS 10:
Subject: RE: Digitech PMC10 FS
200108/msg00199:Re: Request for new Echoplex feature
34:
well... The Digitech PMC-10 handles this ok, but this is still very
200108/msg00173:RE: Echoplex: Fun with the PMC-10
3:
RE: Echoplex: Fun with the PMC-10 10:
Subject: RE: Echoplex: Fun with the PMC-10 24:
> It uses the PMC-10, a MIDI controller, so it's not for everyone--
Limit of 5 matched lines per file exceeded...
35:
pales in comparison to the PMC-10 by Digitech--same thing only different,
40:
though). The Digitech PMC-10 (also discontinued) has much greater
54:
> pales in comparison to the PMC-10 by Digitech--same thing only different,
291:
Re: Echoplex: Fun with the PMC-10, August 06, 2001 564:
RE: Echoplex: Fun with the PMC-10, August 06, 2001 566:
Echoplex: Fun with the PMC-10, August 06, 2001 570:
RE: Digitech PMC10 FS, August 23, 2001
Limit of 5 matched lines per file exceeded...
20:
along side my PMC10 or a single unit with all of the PMC10's 22:
(metal ones I hope) specifically for the PMC10, maybe like the Line6 36:
> MIDI pedal like the PMC-10 would be worth Electrix's while.
200108/msg01324:Re: Bob Sellon's Jamman stereo multitrack upgrade
35:
MUST!!! have a MIDI controller. I use a PMC-10. The design of the updated
3:
Echoplex: Fun with the PMC-10 10:
Subject: Echoplex: Fun with the PMC-10 22:
It uses the PMC-10, a MIDI controller, so it's not for everyone--
Limit of 5 matched lines per file exceeded...
200108/msg00213:RE: Request for new Echoplex feature
23:
use a PMC10, but primarily for managing my patches and calling up
26:
manufacturing a full-featured MIDI pedal like the PMC-10 would be worth
200108/msg01291:Re: Foot pedal for Repeater (or anything for that matter)
20:
> manufacturing a full-featured MIDI pedal like the PMC-10 would be worth 30:
- for more functionality specs, just look at an old PMC10.
3:
RE: Raymond (was PMC10 problem) 10:
Subject: RE: Raymond (was PMC10 problem) 29:
> <I performed a download of my PMC10 using Raymond and then
Limit of 5 matched lines per file exceeded...
21:
functionality like the PMC10? It sure would be incredible since it has 71:
> not any harder to use. Something like the digitech PMC-10, 83:
> PMC-10.) The old ground control was so frustrating because it had the
200109/msg00002:Re: Foot pedal for Repeater (or anything for that matter)
21:
> > manufacturing a full-featured MIDI pedal like the PMC-10 would be worth
30:
>functionality like the PMC10? It sure would be incredible since it has
3:
RE: PMC10 problem 10:
Subject: RE: PMC10 problem 21:
Well my original configuration had the PMC10 set on channels 15 & 16.
Limit of 5 matched lines per file exceeded...
3:
RE: PMC10 problem 10:
Subject: RE: PMC10 problem 40:
> >Well my original configuration had the PMC10 set on channels
Limit of 5 matched lines per file exceeded...
3:
Raymond (was PMC10 problem) 10:
Subject: Raymond (was PMC10 problem) 20:
<I performed a download of my PMC10 using Raymond and then saved the file
Limit of 5 matched lines per file exceeded...
200109/msg00868:Re: MoFx part 2 (and Repeater midi implementation)
73:
> > > I won't be searching for a pmc-10. Will the Yamaha MFC-10 do this?
3:
Re: Raymond (was PMC10 problem) 10:
Subject: Re: Raymond (was PMC10 problem) 22:
to handle the PMC10 <-> PC communication if you ever suspected that the
Limit of 5 matched lines per file exceeded...
21:
> >From what I could tell, it could send just about anything the PMC10 27:
no, this pedal is nothing like a digitech PMC-10. The brochure on the 33:
pmc-10!!
22:
Gotta have a PMC-10 or something like it.
3:
RE: PMC10 problem 10:
Subject: RE: PMC10 problem 32:
>Well my original configuration had the PMC10 set on channels 15 & 16.
Limit of 5 matched lines per file exceeded...
20:
>This was what I suggested before--I am currently using the PMC-10 with two
3:
RE: PMC10 Editor update 10:
Subject: RE: PMC10 Editor update 27:
> Subject: OT: PMC10 Editor update
Limit of 5 matched lines per file exceeded...
200109/msg00854:Re: MoFx part 2 (and Repeater midi implementation)
54:
> I won't be searching for a pmc-10. Will the Yamaha MFC-10 do this?
20:
>Since most of the discussion about pedals comes back to the PMC10, can 22:
>PMC10 and ensure that it will continue to have a long life? For 33:
I bought a PMC10 from a kid on eBay, only to discover that one of
40:
I won't be searching for a pmc-10. Will the Yamaha MFC-10 do this?
200109/msg00451:RE: EDP functions without using MIDI
39:
Gotta have a PMC-10 or something like it.
3:
OT: PMC10 Editor update 10:
Subject: OT: PMC10 Editor update 22:
Raymond is a Windows editor for the Digitech PMC10 MIDI footcontroller.
Limit of 5 matched lines per file exceeded...
21:
asked about having my second, slightly less functional PMC-10 refurbished.
19:
Since most of the discussion about pedals comes back to the PMC10, can 21:
PMC10 and ensure that it will continue to have a long life? For 30:
> no, this pedal is nothing like a digitech PMC-10. The brochure on the 39:
> pmc-10!!
200109/msg00745:Re: RFX Midiwizard with the Repeater
38:
(and then they don't even have the digitech pmc-10 on the list, go 51:
function. Some good pedals are digitech PMC-10, Rocktron All Access, 57:
will find one of the the other pedals used for less. I got my PMC-10 for
53:
not any harder to use. Something like the digitech PMC-10, lake-butler 60:
PMC-10.) The old ground control was so frustrating because it had the
3:
Re: OT: PMC10 Editor update 10:
Subject: Re: OT: PMC10 Editor update 22:
I don't have a programming pad for my PMC10 (anyone
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 problem 10:
Subject: Re: PMC10 problem 22:
least on mine) whenever there is midi in traffic on the PMC10.
Limit of 5 matched lines per file exceeded...
428:
RE: PMC10 problem, September 05, 2001 431:
Re: PMC10 problem, September 05, 2001 489:
Raymond (was PMC10 problem), September 05, 2001 959:
RE: PMC10 problem, September 05, 2001
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 problem 10:
Subject: Re: PMC10 problem 23:
10 Owner's Manual it says "The PMC10 will only transmit and receive PMC10
Limit of 5 matched lines per file exceeded...
19:
>From what I could tell, it could send just about anything the PMC10
200109/msg01132:RE: Loopers-Delight-d Digest V01 #570
19:
This was what I suggested before--I am currently using the PMC-10 with two
29:
by the PMC-10. Just some reverb on the amp. I think if I start playing
3:
RE: PMC10 problem 10:
Subject: RE: PMC10 problem 29:
> least on mine) whenever there is midi in traffic on the PMC10.
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 problem 10:
Subject: Re: PMC10 problem 23:
the first time! 8-) PMC10 resets are a royal pain... but the pedal is
Limit of 5 matched lines per file exceeded...
3:
PMC10 problem 10:
Subject: PMC10 problem 18:
Title: PMC10 problem
Limit of 5 matched lines per file exceeded...
200109/msg00864:Re: MoFx part 2 (and Repeater midi implementation)
62:
> > I won't be searching for a pmc-10. Will the Yamaha MFC-10 do this?
47:
>>functionality like the PMC10? It sure would be incredible since it has
3:
RE: OT: PMC10 problem 10:
Subject: RE: OT: PMC10 problem 20:
plugged into the midi in of the PMC10.
Limit of 5 matched lines per file exceeded...
200109/msg00100:S#!t! HELP! (slightly off-topic midi ?)
42:
Anyway, I checked out the Digitech PMC-10 and this is not acceptable to me.
200109/msg00209:RE: Looping pads and ambient sounds - VX pocket
21:
was to just start a sound like this with a midi pedal like the PMC10
200110/msg00896:Re: Rocktron Midi Mate Controller Pedal
42:
and compact pedal board. I replaced mine with a PMC10 - miss the 44:
gave me, but as far as programmability is concerned the PMC10 is the hands
200110/msg00866:Re: Rocktron Midi Mate Controller Pedal
24:
board. I replaced mine with a PMC10 - miss the large patch name LEDs and 26:
programmability is concerned the PMC10 is the hands down winner.
81:
message. If you then get a more powerful foot pedal like the PMC10, you
29:
change message, sort of like what the PMC10 can do. The one catch is
32:
>change message, sort of like what the PMC10 can do. The one catch is
436:
EDP plays live reverse using the PMC-10, January 26, 2002
200201/msg00699:EDP plays live reverse using the PMC-10
3:
EDP plays live reverse using the PMC-10 10:
Subject: EDP plays live reverse using the PMC-10 21:
I'm using the PMC-10 MIDI pedal to control the Echoplex, and I have been
3:
PMC-10 Manual? 10:
Subject: PMC-10 Manual? 21:
If anyone with a Digitech PMC-10 is coming to Loopstock, could you
200202/msg00641:RE: PMC10 "Long press" - and a EDP and Repeater example.
3:
RE: PMC10 "Long press" - and a EDP and Repeater example. 10:
Subject: RE: PMC10 "Long press" - and a EDP and Repeater example. 22:
> > Specifically what do you program in the PMC10 'pedal up'
Limit of 5 matched lines per file exceeded...
200202/msg00638:PMC10 "Long press" - and a EDP and Repeater example.
3:
PMC10 "Long press" - and a EDP and Repeater example. 10:
Subject: PMC10 "Long press" - and a EDP and Repeater example. 19:
> Specifically what do you program in the PMC10 'pedal up'
Limit of 5 matched lines per file exceeded...
200202/msg00715:RE: PMC10 "Long press" - and a EDP and Repeater example.
3:
RE: PMC10 "Long press" - and a EDP and Repeater example. 10:
Subject: RE: PMC10 "Long press" - and a EDP and Repeater example.
Limit of 5 matched lines per file exceeded...
200202/msg00634:Re: Sending Sysx from a Foot Controller
59:
pmc-10's and midigators hold their value well and are hard to find used.
200202/msg00378:Re: new echoplexer: wanna copy loop and then change it
30:
> any FULL-FEATURED midi controller will work. Digitech PMC-10, Lake-Butler
200202/msg00636:Re: A New EDP Bein' Born(sysex) - Midi Pedals again...
43:
> > Gary opined: Gotta be the PMC-10 by Digitech--discontinued but highly
28:
manner. I've just started getting into programming my PMC-10 for deeper use
200202/msg00373:RE: new echoplexer: wanna copy loop and then change it
19:
any FULL-FEATURED midi controller will work. Digitech PMC-10, Lake-Butler
474:
PMC10 "Long press" - and a EDP and Repeater example., February 20, 2002 484:
RE: PMC10 "Long press" - and a EDP and Repeater example., February 20, 2002 502:
PMC-10 Manual?, February 28, 2002 950:
RE: PMC10 "Long press" - and a EDP and Repeater example., February 22, 2002
Limit of 5 matched lines per file exceeded...
200202/msg00645:RE: PMC10 "Long press" - and a EDP and Repeater example.
3:
RE: PMC10 "Long press" - and a EDP and Repeater example. 10:
Subject: RE: PMC10 "Long press" - and a EDP and Repeater example. 33:
In fact, given this, the PMC10 can be an input device for a synth module
Limit of 5 matched lines per file exceeded...
200202/msg00635:RE: A New EDP Bein' Born(sysex) - Midi Pedals again...
19:
Specifically what do you program in the PMC10 'pedal up' action to make it
200202/msg00622:Re: A New EDP Bein' Born(sysex) - Midi Pedals again...
29:
> Gary opined: Gotta be the PMC-10 by Digitech--discontinued but highly
30:
Gotta be the PMC-10 by Digitech--discontinued but highly prized! There is
25:
>manner. I've just started getting into programming my PMC-10 for deeper
200202/msg00639:Re: PMC10 "Long press" - and a EDP and Repeater example.
3:
Re: PMC10 "Long press" - and a EDP and Repeater example. 10:
Subject: Re: PMC10 "Long press" - and a EDP and Repeater example.
Limit of 5 matched lines per file exceeded...
23:
where could I get the parts? I also own a PMC-10 as well.
44:
> where could I get the parts? I also own a PMC-10 as well.
25:
where could I get the parts? I also own a PMC-10 as well.
21:
>Also, wonder who that Zvonar character bidding on the Day-Glo PMC-10 is???
20:
If anybody is interested in a Digitech PMC-10 midi controller, email
43:
>> If anybody is interested in a Digitech PMC-10 midi controller, email
200203/msg00232:digitech pmc-10 and behringer comparison
3:
digitech pmc-10 and behringer comparison 10:
Subject: digitech pmc-10 and behringer comparison 25:
between the functionality of the Digitech pmc-10 and
31:
Also, wonder who that Zvonar character bidding on the Day-Glo PMC-10 is???
29:
digitech pmc-10 and behringer comparison, March 06, 2002
32:
>If anybody is interested in a Digitech PMC-10 midi controller, email
30:
> where could I get the parts? I also own a PMC-10 as well.
200203/msg00181:Re: footpedal suggestions for eventide and switchblade?
19:
Some people around here like the Digitech PMC10 - but it's out of
200203/msg01248:RE: Request help and advice on simple EDP process...
42:
PMC-10 (note on with no note off) will not turn off record (the intended
64:
> where could I get the parts? I also own a PMC-10 as well.
23:
I am getting ready to get an EDP but after reading about how flimsy thefoot pedal that is made for it can be and how some have built their own... Can anyone offer advice about this? I am wondering if it really isthat delicate and if so, how difficult would it be to make my own andwhere could I get the parts? I also own a PMC-10 as well.Thanks,SteveDo You Yahoo!?
3:
re: Echoplex Off on the PMC-10 10:
Subject: re: Echoplex Off on the PMC-10
517:
Echoplex Off on the PMC-10, April 19, 2002 1534:
re: Echoplex Off on the PMC-10, April 19, 2002
3:
Echoplex Off on the PMC-10 10:
Subject: Echoplex Off on the PMC-10
28:
Also, I have the PMC-10 manual v1.0 but a v2.0 PMC-10. What does the 41:
> 1st, if you have a pc get yourself Raymond the pmc10 editor for windows 59:
> > > > my PMC-10 as a controller for my newly-upgraded EDP. I managed to 79:
> > PMC-10 so I'm not familiar with those hex strings, but I'm guessing
23:
> > my PMC-10 as a controller for my newly-upgraded EDP. I managed to 42:
PMC-10 so I'm not familiar with those hex strings, but I'm guessing that
24:
> my PMC-10 as a controller for my newly-upgraded EDP. I managed to get 44:
> keyboard. Is there any advantage to it in my case, using the PMC-10?
21:
1st, if you have a pc get yourself Raymond the pmc10 editor for windows 40:
> > > my PMC-10 as a controller for my newly-upgraded EDP. I managed to 59:
> PMC-10 so I'm not familiar with those hex strings, but I'm guessing that
20:
my PMC-10 as a controller for my newly-upgraded EDP. I managed to get 32:
keyboard. Is there any advantage to it in my case, using the PMC-10?
200206/msg00940:Re: Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV
3:
Re: Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV 10:
Subject: Re: Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV
34:
programmed on the PMC10 to address the new midi controllers.
200206/msg01078:Re: Can One trigger the fill button on the SR-16 thru MIDI?
20:
check the pmc10 manual I think you can trigg pmc 10 _patches_ with an 47:
> Uh--one way is to use the PMC-10 internal switch setting--but that's not
200206/msg00572:Re: Repeater vs EDP (what I like about the Repeater)
33:
out-of-production (but immensely powerful) Digitech PMC-10? They're
74:
DirectMidi commands would be best programmed from the footpedal (PMC10 in
22:
DirectMidi commands would be best programmed from the footpedal (PMC10 in
200206/msg00925:Reprogramming the PMC-10 for LoopIV
3:
Reprogramming the PMC-10 for LoopIV 10:
Subject: Reprogramming the PMC-10 for LoopIV
Limit of 5 matched lines per file exceeded...
200206/msg00910:Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV
3:
Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV 10:
Subject: Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV 52:
> I'm using the PMC-10 MIDI pedal to control the Echoplex, and I have been
Limit of 5 matched lines per file exceeded...
69:
Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV, June 23, 2002 504:
Reprogramming the PMC-10 for LoopIV, June 23, 2002 506:
EDP Won't Play live reverse (using the PMC-10) in LoopIV, June 23, 2002 1484:
Re: Re: EDP Won't Play live reverse (using the PMC-10) in LoopIV, June 23, 2002
200206/msg01077:Can One trigger the fill button on the SR-16 thru MIDI?
24:
Uh--one way is to use the PMC-10 internal switch setting--but that's not
200206/msg01069:RE: Loop IV: Substitute is awesome
37:
pedalboard unless I program one of my PMC10 buttons for that purpose. 38:
But I am not sure I want to have the PMC10 performing that repetitive
22:
Personally, I switched to a PMC-10 foot controller, but I'm considering
47:
> DirectMidi commands would be best programmed from the footpedal (PMC10
200206/msg00907:EDP Won't Play live reverse (using the PMC-10) in LoopIV
3:
EDP Won't Play live reverse (using the PMC-10) in LoopIV 10:
Subject: EDP Won't Play live reverse (using the PMC-10) in LoopIV 26:
I'm using the PMC-10 MIDI pedal to control the Echoplex, and I have been
Limit of 5 matched lines per file exceeded...
200206/msg00960:Re: Live Reverse Lives! (sdrawkcab)
37:
The only strangeness I encountered was after getting my PMC-10, and it
200207/msg00887:Fascinating Restoration of EDP Front Panel Functionality with DirectMIDI in Loop IV
21:
the PMC-10--haven't gotten too far (haven't actually recorded/listened to
47:
> signatures, also. I'm using a Digitech PMC-10 MIDI footcontroller to 57:
> Feedback is pretty self-explanatory. I set the PMC-10 up with CC (#50) 77:
> commands into the PMC-10 to allow me to switch easily between loop
200207/msg00546:Foot control footware (was Expanded Midi Commands and the EDP)
22:
I find that the top row of the PMC-10 hard to use in a precise manner
25:
signatures, also. I'm using a Digitech PMC-10 MIDI footcontroller to send 34:
Feedback is pretty self-explanatory. I set the PMC-10 up with CC (#50) 50:
commands into the PMC-10 to allow me to switch easily between loop lengths.
200207/msg00425:Re: New MIDI footpedal (MFC10) and EDP.
20:
out-of-production-but-makes-ebay-appearances Digitech PMC10 (at least once
35:
PMC-10 just fine, but I'd prefer not to have to troll Ebay looking for
200207/msg00832:RE: Foot control footware (was Expanded Midi Commands and the EDP)
27:
> I find that the top row of the PMC-10 hard to use in a precise manner
200207/msg00288:RE: Controlling an EDP with a FCP1010?
26:
I use a MIDI pedal (PMC-10) with the EDP and find that it's useful to also
200207/msg00577:RE: Expanded Midi Commands and the EDP
21:
Thanks for all your help. I have the PMC10 as well and it seems it is
51:
>PMC-10 just fine, but I'd prefer not to have to troll Ebay looking for
103:
>> the PMC-10--haven't gotten too far (haven't actually recorded/listened
138:
>>> the PMC-10--haven't gotten too far (haven't actually
200207/msg01052:Re: Using the Behringer FCB1010 midi controller w/ echoplex
136:
batch of pedals. Very simple to do with the Digitech PMC-10 and Sean's
200207/msg01059:Re: Using the Behringer FCB1010 midi controller w/ echoplex
29:
must be something about the AllAccess I guess. On my PMC-10 it is the same
19:
The Record button on my PMC-10 has been acting funny lately. It seems to 21:
Record to a new button for now, but I reckon that there are enough PMC-10
94:
> > the PMC-10--haven't gotten too far (haven't actually recorded/listened
71:
> the PMC-10--haven't gotten too far (haven't actually recorded/listened to
200207/msg00582:Re: Foot control footware (was Expanded Midi Commands and the EDP)
26:
> I find that the top row of the PMC-10 hard to use in a precise manner
155:
> >>> the PMC-10--haven't gotten too far (haven't actually
200208/msg00724:Re: (take 2) EDP Intermittent Restart Thingie
69:
> > - I was using a PMC-10 to control the EDP, plus a Boss Volume
200208/msg00715:(take 2) EDP Intermittent Restart Thingie
47:
- I was using a PMC-10 to control the EDP, plus a Boss Volume pedal.
200208/msg00713:EDP S.O.S. - Intermittent Restart Thingie
42:
- I was using a PMC-10 to control the EDP, plus a Boss Volume pedal.
3:
pmc-10 on ebay 10:
Subject: pmc-10 on ebay
1470:
pmc-10 on ebay, August 17, 2002
200208/msg00719:Re: (take 2) EDP Intermittent Restart Thingie
64:
> - I was using a PMC-10 to control the EDP, plus a Boss Volume pedal.
200208/msg01297:Roland PK-5 as Echoplex Controller
34:
I love my PMC-10, but they make crappy bass pedals, so I was please to find
39:
Voit and Gary Lehman who program very complex strings on their PMC-10's, 43:
pedalboard, simply because almost all of what I do with the PMC-10 would 44:
translate, and I wouldn't have to troll Ebay looking for a PMC-10.
200209/msg01051:Lake Butler RFC-1 Battery Woes--No Direct Loop Content
21:
controller I used before I acquired the PMC-10. On the advice of Dr.
54:
connected to PMC10 (under Loop III), or is it strictly through the jack
19:
Yeah, that's the way I was doing it in Loop III--PMC-10 sending CCs for FB
29:
> > Yeah, that's the way I was doing it in Loop III--PMC-10
26:
PMC10 or the Lake buttler.So much effort into building
200209/msg00035:RE: Roland PK-5 as Echoplex Controller
23:
there's a spot to Velcro the PMC-10 to the top--they are exactly the same
22:
connected to PMC10 (under Loop III), or is it strictly through the jack
200209/msg01052:RE: Lake Butler RFC-1 Battery Woes--No Direct Loop Content
43:
controller I used before I acquired the PMC-10. On the advice of Dr.
36:
> connected to PMC10 (under Loop III), or is it strictly through the jack
23:
>connected to PMC10 (under Loop III), or is it strictly through the jack
200209/msg00009:Re: Roland PK-5 as Echoplex Controller
48:
>I love my PMC-10, but they make crappy bass pedals, so I was please to
200209/msg00864:RE: midi pedal working as momentary
29:
The fabulous PMC-10 by Digitech, long discontinued but still available
21:
PMC10 or the Lake buttler.So much effort into building
26:
> Yeah, that's the way I was doing it in Loop III--PMC-10
200210/msg00145:RE: rds-8000 repair question | rds 7.6 mod
27:
Digitech PMC-10. (801) 566-8919. Will they work on this unit?
200210/msg00012:RE: Lake Butler RFC-1 Battery Woes--No Direct Loop Content
50:
>controller I used before I acquired the PMC-10. On the advice of Dr.
200210/msg00026:RE: Lake Butler RFC-1 Battery Woes--No Direct Loop Content
64:
> PMC-10. On the advice of Dr.
42:
This is the case with the DL-4 and the PMC-10, for instance. The
33:
This is the case with the DL-4 and the PMC-10, for instance. The
25:
do momentary toggle switch like the PMC10 it would be 41:
> back to the PMC10. At some point they lock up while 49:
> They show up on ebay but the last two PMC10 auctions
23:
back to the PMC10. At some point they lock up while accepting dumps if 29:
They show up on ebay but the last two PMC10 auctions I've seen insanely
200301/msg00426:RE: Gig Report: Portland LoopFest A-Go-Go (my EDP in action)
42:
The biggest challenge was getting comfortable with my PMC-10 patch sets
3:
PMC10 Dimensions 10:
Subject: PMC10 Dimensions
200301/msg00425:RE: Gig Report: Portland LoopFest A-Go-Go (my EDP in action)
28:
The biggest challenge was getting comfortable with my PMC-10 patch sets
110:
PMC10 Dimensions, January 24, 2003 1733:
FS: PMC-10, January 18, 2003
3:
FS: PMC-10 10:
Subject: FS: PMC-10 19:
I am thinking about selling one of my PMC10's and thought I would offer
200301/msg00209:Re: New model Ground Control MIDI controller
29:
have 2 pmc10 now so I'm covered for the rest of my life
32:
and overdub single footswitches hooked up. Also, if you've got a PMC-10,
200302/msg00229:RE: MIDI Foot controllers - a comparison list
19:
Nice job, but the omission of the Digitech PMC10, though discontinued,
20:
software and for the most part this is true . . . Steve Ginn has a PMC-10
22:
at this point, unless I can find a PMC-10, which I'll probably try to do
146:
EDP/PMC10 Help!, February 04, 2003
200302/msg00943:Bidding Strategy on eBay (for loop stuff, say?)
19:
Usually when I really want something (like my last PMC-10) I bid as much as 26:
PS Almost ready to try the new setup--doubleneck Ztar into PMC-10 into MPX
28:
For any PMC-10 patch you have "String A" and "String B". String A is what 34:
Also, get Raymond, the PMC-10 editor. It makes programming the PMC-10 a 39:
and also, join the yahoo pmc-10 group: 40:
http://groups.yahoo.com/group/pmc10/
200302/msg00784:Re: Re: Minimalist rigs>>into FCB1010 sloths
21:
I don't have a fcb1010 (PMC10)
50:
functionality would be the Digitech PMC-10, Rocktron AllAccess, Roland 61:
like the digitech pmc-10 best, but they are hard to find since they are
62:
>functionality would be the Digitech PMC-10, Rocktron AllAccess, Roland 75:
>like the digitech pmc-10 best, but they are hard to find since they are
200302/msg00231:RE: MIDI Foot controllers - a comparison list
19:
>Nice job, but the omission of the Digitech PMC10, though discontinued,
3:
EDP/PMC10 Help! 10:
Subject: EDP/PMC10 Help! 36:
running with my PMC10. I’ve programmed in Record, Overdub, Multiply, Mute
3:
RE: pmc10 on ebay 10:
Subject: RE: pmc10 on ebay 29:
Subject: pmc10 on ebay
Limit of 5 matched lines per file exceeded...
243:
pmc10 on ebay, March 14, 2003 258:
RE: pmc10 on ebay, March 14, 2003
3:
pmc10 on ebay 10:
Subject: pmc10 on ebay
Limit of 5 matched lines per file exceeded...
23:
I use a PMC-10 with Loop IV--and have a foot pedal setup to set loop time
37:
with the PMC-10. One thing I noticed at SLO is that a clinic on the
200305/msg00442:Search for granular footpedal-osity...
19:
Ah... the PMC-10... Anyone have an extra one laying around (Ebay says, "0 20:
items found for digitech pmc-10") Or an equivalently powerful footpedal
200305/msg00450:Re: Captain LaFosse's foot gear...
19:
I thought he used Digitech PMC-10s, but I'm not him, so ... it's for what
200305/msg00461:Re: Search for granular footpedal-osity...
28:
much much more than a pmc10 42:
> Ah... the PMC-10... Anyone have an extra one laying around (Ebay 44:
> items found for digitech pmc-10") Or an equivalently powerful
200305/msg00483:EDP Momentary granulation technique...
24:
of sending press/release message strings (e.g. PC1600X, PMC-10)
200305/msg00500:GP100 Tap delay triggering with the FCB-1010
24:
my FCB1010.It worked with the PMC10 but it could send
200306/msg00998:Re: using presets on the echoplex
33:
> >I am using an echoplex with loop IV and a PMC10 midi
24:
manual, and the PMC10 manual all completely through 3 36:
I've programmed the PMC10 to access every single
3:
Re: Echoplex, Loop IV, PMC10 10:
Subject: Re: Echoplex, Loop IV, PMC10 68:
> >what patches I had set on each PMC10 pedal for that
Limit of 5 matched lines per file exceeded...
57:
Thanks to everyone for tips on the Echoplex and PMC10,
3:
Re: Echoplex, Loop IV, PMC10 10:
Subject: Re: Echoplex, Loop IV, PMC10 47:
>what patches I had set on each PMC10 pedal for that
Limit of 5 matched lines per file exceeded...
82:
PMC10 at the same time? 93:
9. Do you always set up your programs in the PMC10
200306/msg00503:RE: echoplex, loop IV, PMC10, questions
3:
RE: echoplex, loop IV, PMC10, questions 10:
Subject: RE: echoplex, loop IV, PMC10, questions
Limit of 5 matched lines per file exceeded...
200306/msg00360:echoplex, loop IV, PMC10, questions
3:
echoplex, loop IV, PMC10, questions 10:
Subject: echoplex, loop IV, PMC10, questions 20:
PMC10 to control the feedback function, and the volume
Limit of 5 matched lines per file exceeded...
200306/msg00378:Re: echoplex, loop IV, and the PMC10
3:
Re: echoplex, loop IV, and the PMC10 10:
Subject: Re: echoplex, loop IV, and the PMC10
Limit of 5 matched lines per file exceeded...
3:
Re: Echoplex, Loop IV, PMC10 10:
Subject: Re: Echoplex, Loop IV, PMC10 37:
>what patches I had set on each PMC10 pedal for that
Limit of 5 matched lines per file exceeded...
200306/msg00999:Re: using presets on the echoplex
37:
> >I am using an echoplex with loop IV and a PMC10
19:
I am using an echoplex with loop IV and a PMC10 midi
533:
Re: Echoplex, Loop IV, PMC10, June 12, 2003 555:
Re: echoplex, loop IV, PMC10, questions, June 10, 2003 889:
Re: Echoplex, Loop IV, PMC10, June 11, 2003 1151:
RE: echoplex, loop IV, PMC10, questions, June 13, 2003
Limit of 5 matched lines per file exceeded...
3:
Re: Echoplex, Loop IV, PMC10 10:
Subject: Re: Echoplex, Loop IV, PMC10 33:
what patches I had set on each PMC10 pedal for that
Limit of 5 matched lines per file exceeded...
200306/msg00362:Re: echoplex, loop IV, PMC10, questions
3:
Re: echoplex, loop IV, PMC10, questions 10:
Subject: Re: echoplex, loop IV, PMC10, questions 35:
>PMC10 to control the feedback function, and the volume
Limit of 5 matched lines per file exceeded...
200306/msg00989:Re: using presets on the echoplex
20:
>I am using an echoplex with loop IV and a PMC10 midi
37:
>manual, and the PMC10 manual all completely through 3 49:
>I've programmed the PMC10 to access every single
200306/msg00438:SV: echoplex, loop IV, PMC10, questions
3:
SV: echoplex, loop IV, PMC10, questions 10:
Subject: SV: echoplex, loop IV, PMC10, questions
Limit of 5 matched lines per file exceeded...
200306/msg00380:RE: echoplex, loop IV, PMC10, questions
3:
RE: echoplex, loop IV, PMC10, questions 10:
Subject: RE: echoplex, loop IV, PMC10, questions 19:
I've been using 5 banks on the PMC10. Not too hard to create a Set on
Limit of 5 matched lines per file exceeded...
3:
echoplex, loop IV, and the PMC10 10:
Subject: echoplex, loop IV, and the PMC10 22:
IV and a PMC10.
Limit of 5 matched lines per file exceeded...
49:
> does anyone have a digitech PMC-10 for sale, or know where to get
47:
does anyone have a digitech PMC-10 for sale, or know where to get one? i
200308/msg01298:Re: HELP!!! Echoplex footswitch part number?
42:
>Echoplex footswitches. I use a MIDI controller (PMC-10) most of the time
57:
I think Andre uses a Digitech PMC-10, which is not so easy to find, but
45:
(non-MIDI) interface, I can understand why you might not jump in feet first :&} But the best thing about MY pedal (a PMC-10) is that you can send multiply commands to multiple units--as large a string as you want. Gatta admit that makes dancing more elegant. By the way, what if you drink at a gig and try to do the footswitch boogie? Can't you hurt yourself that way? Anybody here ever take a tumble in the line of duty? In other news, I KNEW it was aliens! Gary
200308/msg00636:RE: 2 EDPs: words of wisdom sought
34:
This is what I do--and since you, Neil, have the PMC-10, creating foot
200308/msg00627:RE: 2 EDPs: words of wisdom sought
26:
This is what I do--and since you, Neil, have the PMC-10, creating foot
106:
I use a PMC-10, but 99% of everything I do with it could be done just as
24:
:&} But the best thing about MY pedal (a PMC-10) is that you can send
104:
PMC-10) is that you can send multiply commands to multiple units--as large a
47:
(non-MIDI) interface, I can understand why you might not jump in feet first :&} But the best thing about MY pedal (a PMC-10) is that you can send multiply commands to multiple units--as large a string as you want. Gatta admit that makes dancing more elegant. By the way, what if you drink at a gig and try to do the footswitch boogie? Can't you hurt yourself that way? Anybody here ever take a tumble in the line of duty? In other news, I KNEW it was aliens! Gary
200308/msg01282:HELP!!! Echoplex footswitch part number?
23:
Echoplex footswitches. I use a MIDI controller (PMC-10) most of the time
26:
>I think Andre uses a Digitech PMC-10, which is not so easy to find, but
22:
setups (PMC-10 in my case) that users have dialed in since Loop IV,
200308/msg00582:Re: Delicious Chicken--Cooked by Hand or MIDI?
26:
programmer for my PMC-10 and hauling around a 10sp rack, pedalboard, midi
28:
synergistic patches and banks in my PMC-10 to control my loopers, effects
20:
For a week to do nothing but brainstorm, program and test creative synergistic patches and banks in my PMC-10 to control my loopers, effects boxes, synths, and Ableton Live. So much potential, so little time (or discipline)
19:
The coveted and no-longer-made Digitech PMC-10 should be able to do it.
21:
How reliable is the pmc10? When it works, as reliable as your aim, i.e.,
28:
How reliable is your pmc10? If you come across one let 46:
> ------>Hey Louie--I am using the PMC-10, a very
26:
------>Hey Louie--I am using the PMC-10, a very similar unit no longer made
200311/msg00237:Re: Lake buttler Mitigator question
74:
>> >compares with the fcb1010 or the pmc10.My main
200311/msg00228:Re: Lake buttler Mitigator question
26:
> > compares with the fcb1010 or the pmc10.My main
200311/msg00420:Re: FCB1010 wishlist (was: LD Community)
200311/msg00371:FCB1010 wishlist (was: LD Community)
200311/msg00218:Re: Lake buttler Mitigator question
47:
>compares with the fcb1010 or the pmc10.My main
200311/msg00222:Re: Lake buttler Mitigator question
22:
> compares with the fcb1010 or the pmc10.My main
576:
Unload yer PMC-10 on me..., November 17, 2003
21:
compares with the fcb1010 or the pmc10.My main
200311/msg00466:Momentary (was EDP w/RFX midi buddy)
32:
----->Good point. I am generalizing . . . the PMC-10 can act as a
3:
Unload yer PMC-10 on me... 10:
Subject: Unload yer PMC-10 on me...
200311/msg00230:Re: Lake buttler Mitigator question
61:
> >compares with the fcb1010 or the pmc10.My main
25:
I also use a MIDI foot controller, the Digitech PMC-10 and a Peavey
27:
PS PMC-10 is the ultimate foot controller?
200312/msg00124:Replacing With Multiply on Echoplex Digital Pro
24:
written a pair of patches using the Digitech PMC-10 to replace loops in the EDP,
41:
PMC-10, Lake-Butler Midigator, and Yamaha MFC-10. Pros and cons of each
55:
> PMC-10, Lake-Butler Midigator, and Yamaha MFC-10. Pros and cons of each
200401/msg00381:RE: Favorite EDP MIDI Foot Controler?
44:
> this one and it seems to do everything the PMC10 lake
200401/msg00374:RE: Favorite EDP MIDI Foot Controler?
34:
the advice of a fellow MIDI musician, I acquired a PMC-10 by Digitech. At
200401/msg00377:RE: Favorite EDP MIDI Foot Controler?
20:
this one and it seems to do everything the PMC10 lake 47:
> PMC-10 by Digitech. At
200401/msg00375:Re: 3rd Attempt...Throw me a Bone.
22:
3. No--that pedal will never do that. You need a more full-featured MIDI pedal, like that Behringer thing that everyone's been discussing, or the Rocktron All Access, Digitech PMC-100 or the Roland FC-200 (I believe that's the number). It has to be a pedal that you can program to send note on/off messages. Your pedal only sends program change commands.
200401/msg00046:Re: MIDI Pedal Limitations (was: Loop III and MIDI)
59:
get similar results from a Digitech PMC-10, but those are OOP, they're
22:
but you need a pmc10 for niplpe power
200401/msg00318:Kim--HTML on LD? (was: RE: Using computers as a Live Looper)
20:
Hi--I would be interested in sharing patches with anyone using a PMC-10 to
200402/msg00077:RE: How to match parameters on two EDPs
24:
between dual mono and stereo use, where the same PMC10 banks can control
200402/msg00068:RE: 2 EDP in stereo: how to match parameters
45:
> (and back again) is in order, and I think the PMC10 could do it, but
200402/msg00066:RE: 2 EDP in stereo: how to match parameters
66:
channel (and back again) is in order, and I think the PMC10 could do it,
200402/msg00117:RE: How to match parameters on two EDPs
21:
I put these commands in my PMC10 after setting up the EDPs with the
200402/msg00067:RE: 2 EDP in stereo: how to match parameters
25:
(and back again) is in order, and I think the PMC10 could do it, but each
27:
Am I wrong or is/was the Digitech pmc10 more compact than the Behringer?
33:
Am I wrong or is/was the Digitech pmc10 more compact than the Behringer?
3:
Re: EDP w/PMC-10 10:
Subject: Re: EDP w/PMC-10 20:
have a typo in the PMC-10 programming? Or maybe you have a flaky switch on
Limit of 5 matched lines per file exceeded...
3:
RE: EDP w/PMC-10 10:
Subject: RE: EDP w/PMC-10 28:
Subject: EDP w/PMC-10
Limit of 5 matched lines per file exceeded...
3:
RE: EDP w/PMC-10 10:
Subject: RE: EDP w/PMC-10
Limit of 5 matched lines per file exceeded...
3:
Re: EDP w/PMC-10 10:
Subject: Re: EDP w/PMC-10 27:
>OK, so I just got my PMC-10 footcontroller to use with my EDP. I had, for
Limit of 5 matched lines per file exceeded...
200405/msg00427:Re: atlanta loop stuff this weekend? (and PMC-10 FA)
3:
Re: atlanta loop stuff this weekend? (and PMC-10 FA) 10:
Subject: Re: atlanta loop stuff this weekend? (and PMC-10 FA) 25:
Also, I'm selling my spare Digitech PMC-10 (gotta help pay for the Atlanta
295:
RE: EDP w/PMC-10, May 12, 2004 321:
Re: atlanta loop stuff this weekend? (and PMC-10 FA), June 01, 2004 322:
EDP w/PMC-10, May 12, 2004 323:
RE: EDP w/PMC-10, May 12, 2004
Limit of 5 matched lines per file exceeded...
3:
EDP w/PMC-10 10:
Subject: EDP w/PMC-10 19:
OK, so I just got my PMC-10 footcontroller to use with my EDP. I had, for
Limit of 5 matched lines per file exceeded...
3:
RE: EDP w/PMC-10 10:
Subject: RE: EDP w/PMC-10 39:
> message. Maybe you have a typo in the PMC-10 programming? Or
Limit of 5 matched lines per file exceeded...
200406/msg00577:RE: EDP Footswitch acting up...or is it just me?
20:
switches with heavy duty metal ones), or via midi message (Digitech PMC-10)
200406/msg00217:BEST MIDI FOOTCONTROLLER FOR EDP CURRENTLY MADE?
22:
get for the EDP? The Digitech PMC-10 is soo hard to find. The Nobels MF-2 looks
200406/msg00219:Re: BEST MIDI FOOTCONTROLLER FOR EDP CURRENTLY MADE?
22:
> Digitech PMC-10 is soo hard to find. The Nobels MF-2 looks like it does
27:
>amounts, like 100%, 75%, 50%, 25%, 0%? I use a Digitech PMC-10, so I can
20:
amounts, like 100%, 75%, 50%, 25%, 0%? I use a Digitech PMC-10, so I can
200407/msg00425:RE: EDP Record Long Press Malfunction
26:
might have affected the EDP is my PMC10 had some weird thing happen and 49:
>It's definitely in the EDP and not the controller (PMC10). I usually
200407/msg00399:RE: EDP Record Long Press Malfunction
19:
I had this problem with my beige face EDP and the PMC10...I also got so 22:
double press the small switches on the PMC10...It is impossible for me 24:
As a result, Im selling it (the PMC10, not the EDP):
200407/msg00396:EDP Record Long Press Malfunction
42:
(PMC10). I usually have to press 3-5 times to get it to reset. If you press
200407/msg00418:Re: EDP Record Long Press Malfunction
25:
>It's definitely in the EDP and not the controller (PMC10). I usually have
973:
Digitech PMC-10 expert?, August 09, 2004
3:
Digitech PMC-10 expert? 10:
Subject: Digitech PMC-10 expert? 18:
Is there anyone on this list who is an expert at programming a digitech PMC-10 and who happens to live within striking distance of Washington DC?
200409/msg00319:RE: My foot controller steps on Your Foot controller
200409/msg00341:RE: My foot controller steps on Your Foot controller
30:
> What makes the PMC-10 a superior controller are its extreme
200409/msg00336:RE: My foot controller steps on Your Foot controller
24:
What makes the PMC-10 a superior controller are its extreme
200409/msg00335:Re: Loopers-Delight-d Digest V04 #368
21:
instructions for programming a PMC-10 to control an EDP with all the
200409/msg00318:My foot controller steps on Your Foot controller
200410/msg00236:Looping with the Echoplex with the Lexicon G2 slaved to its clock
37:
me up til now. I'll just dump the sysx into the PMC-10 . . .
200410/msg00246:RE: Looping with the Echoplex with the Lexicon G2 slaved to its clock
74:
> me up til now. I'll just dump the sysx into the PMC-10 . . .
200410/msg00247:Re: Looping with the Echoplex with the Lexicon G2 slaved to its clock
105:
>>me up til now. I'll just dump the sysx into the PMC-10 . . .
3:
Re: MIDI Mitigator vs PMC-10 10:
Subject: Re: MIDI Mitigator vs PMC-10 31:
A quick google reveals that patchmanmusic has a pmc10 for sale in the us
Limit of 5 matched lines per file exceeded...
3:
Re: MIDI Mitigator vs PMC-10 10:
Subject: Re: MIDI Mitigator vs PMC-10 36:
In my experience the PMC-10 is much harder to find than the
Limit of 5 matched lines per file exceeded...
200411/msg00501:Re: MIDI Mitigator Pedal for sale on ebay
23:
it's no PMC-10 25:
It's a lot harder to break than the PMC-10. 30:
that distinguishes the PMC-10). What it does do is allow the
Limit of 5 matched lines per file exceeded...
3:
MIDI Mitigator vs PMC-10 10:
Subject: MIDI Mitigator vs PMC-10 25:
the PMC-10).
Limit of 5 matched lines per file exceeded...
200411/msg00507:Re: MIDI Mitigator Pedal for sale on ebay
76:
Re: MIDI Mitigator vs PMC-10, November 22, 2004 372:
MIDI Mitigator vs PMC-10, November 22, 2004 946:
Re: MIDI Mitigator vs PMC-10, November 22, 2004
200411/msg00487:MIDI Mitigator Pedal for sale on ebay
19:
and it's not mine--and it's no PMC-10 but many of our list users swear by
20:
I do use the PMC-10 to achieve this--and it sends several long undos
3:
Re: PMC-10 popped up on eBay 10:
Subject: Re: PMC-10 popped up on eBay 36:
> http://nosuch.biz/pmc10/parallel
Limit of 5 matched lines per file exceeded...
3:
RE: PMC-10 popped up on eBay 10:
Subject: RE: PMC-10 popped up on eBay 21:
http://nosuch.biz/pmc10/parallel
Limit of 5 matched lines per file exceeded...
188:
RE: PMC-10 popped up on eBay, February 25, 2005 189:
PMC-10 popped up on eBay, February 25, 2005 654:
Re: PMC-10 popped up on eBay, February 25, 2005
200502/msg00197:EDP LoopTrig question (was RE: Loopers-Delight-d Digest V05 #72)
40:
Yes, finally I decided to go for the PMC10 41:
(http://nosuch.biz/pmc10/parallel)
52:
using it happily. Other midi pedal options include the digitech PMC-10,
3:
PMC-10 popped up on eBay 10:
Subject: PMC-10 popped up on eBay 20:
PMC-10 popped up on eBay
3:
PMC10 schematics needed 10:
Subject: PMC10 schematics needed 21:
LD probably being the largest PMC10 user base maybe one of you has the
Limit of 5 matched lines per file exceeded...
3:
Re: PMC10 schematics needed 10:
Subject: Re: PMC10 schematics needed 29:
> LD probably being the largest PMC10 user base maybe one of you has the
Limit of 5 matched lines per file exceeded...
136:
PMC10 schematics needed, June 28, 2005 138:
Re: PMC10 schematics needed, June 30, 2005 1006:
Re: PMC10 schematics needed, June 28, 2005
3:
Re: PMC10 schematics needed 10:
Subject: Re: PMC10 schematics needed 35:
> LD probably being the largest PMC10 user base maybe one of you has the
Limit of 5 matched lines per file exceeded...
200507/msg00176:RE: RE: Changing EDP Parameters via MIDI
81:
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to
200507/msg00173:Re: Loopers-Delight-d Digest V05 #430
50:
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
200507/msg00177:RE: Changing EDP Parameters via MIDI
81:
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
200507/msg00175:RE: Changing EDP Parameters via MIDI
71:
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
200507/msg00166:RE: Changing EDP Parameters via MIDI
23:
Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
200508/msg00223:Re: AW: Behringer FCB 1010 or Digital Music Ground Control?
19:
FWIW: DO NOT buy any controller that isn't capable of sending any/all of the128 possible CC or Note On / Note Off strings, in both momentary or togglemode. At some point, you'll highly regret it and be sitting there with apiece of gear you realize you don't want to use anymore... AND you'll stillbe looking for a full-featured controller to boot. That's why I've put upwith my bitchy PMC-10 for all these years! (had the chance to grab anAll-Access at one time, but didn't... damn, damn, damn.)__________________________________________________Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
200508/msg00636:Re: the perfect midi foot controller - wish list
24:
> momentary and toggle led mode like the Digitech PMC10
200508/msg00218:Wish list for EDP (was "Control Learn" for the EDP) The future of the EDP (no suggestions!)
20:
PMC-10) and just use my MIDI guitar controller (it's a Ztar)--EDP uses note
200508/msg00635:Re: the perfect midi foot controller - wish list
19:
momentary and toggle led mode like the Digitech PMC10
200508/msg00207:Re: AW: Behringer FCB 1010 or Digital Music Ground Control?
25:
with my bitchy PMC-10 for all these years! (had the chance to grab an
200508/msg00225:RE: AW: Behringer FCB 1010 or Digital Music Ground Control?
81:
with my bitchy PMC-10 for all these years! (had the chance to grab an
200508/msg00230:RE: Behringer FCB 1010 or Digital Music Ground Control?
20:
Ive had esxperiences with the Digitech PMC10,Rocktron 22:
dream come tue foot controller would be the PMC10 if
29:
as the pmc10 schematics you promissed to scan this spring
200509/msg00521:Re: sustain type foot controller into a PMC? was: RE: The Big(ish) Idea
200509/msg00312:Re: EDP Footpedal vs. FCB1010 ? ?
87:
> >> FCB1010 is really weak. The Digitech PMC-10 and the Lake-Butler 94:
> >> somebody would just copy the old Digitech PMC-10 architecture.
200509/msg00495:Re: sustain type foot controller into a PMC? was: RE: The Big(ish) Idea
200509/msg00293:RE: EDP LOOP4 question: Accessing individual loops directly
21:
I think it does. I wanted to reply to your question. I'm a (lucky) PMC-10
200509/msg00296:RE: EDP LOOP4 question: Accessing individual loops directly
200509/msg00313:Re: EDP Footpedal vs. FCB1010 ? ?
35:
Compared to some past midi controllers however, the Behringer FCB1010 is really weak. The Digitech PMC-10 and the Lake-Butler RFC-1 Midigator were really exceptional, full-featured midi pedals, and completely blow away anything available today. Both are long out of production. They are really hard to find today because people really treasure them. If you can find one, get it. 37:
It is really sad that nobody makes something comparable. I wish somebody would just copy the old Digitech PMC-10 architecture.
200509/msg00505:Re: sustain type foot controller into a PMC? was: RE: The Big(ish)Idea
200509/msg00305:Re: EDP Footpedal vs. FCB1010 ? ?
59:
FCB1010 is really weak. The Digitech PMC-10 and the Lake-Butler 66:
somebody would just copy the old Digitech PMC-10 architecture.
200509/msg00459:PMC-10 ( was RE: EDP Footpedal vs. FCB1010 ? ?)
3:
PMC-10 ( was RE: EDP Footpedal vs. FCB1010 ? ?) 10:
Subject: PMC-10 ( was RE: EDP Footpedal vs. FCB1010 ? ?) 19:
Andre LaFosse uses the treasured PMC-10 by Digitech to control his EDP with
200509/msg00294:Re: EDP LOOP4 question: Accessing individual loops directly
394:
PMC-10 using Sustain type foot pedals, September 20, 2005 397:
PMC-10 ( was RE: EDP Footpedal vs. FCB1010 ? ?), September 17, 2005
28:
>as the pmc10 schematics you promissed to scan this spring 32:
ha, yes keep up the pressure Claude! The pmc-10 schematic is sitting here
200509/msg00460:RE: EDP Footpedal vs. FCB1010 ? ?
20:
Last time I saw him, Andre used the Digitech PMC-10 but carried the EFC-7
200509/msg00290:Re: EDP Footpedal vs. FCB1010 ? ?
28:
really weak. The Digitech PMC-10 and the Lake-Butler RFC-1 Midigator were 35:
would just copy the old Digitech PMC-10 architecture.
200509/msg00547:PMC-10 using Sustain type foot pedals
3:
PMC-10 using Sustain type foot pedals 10:
Subject: PMC-10 using Sustain type foot pedals
200509/msg00303:Re: EDP Footpedal vs. FCB1010 ? ?
51:
> FCB1010 is really weak. The Digitech PMC-10 and the Lake-Butler 58:
> somebody would just copy the old Digitech PMC-10 architecture.
53:
> >> to see the PMC10 back built with better quality
21:
The PMC-10 appears to be a rare beast, at the least 66:
the> Digitech PMC-10!> > 67:
http://www.loopers-delight.com/tools/PMC10/PMC10.html> >
18:
That does look like the right size! Thanks Kim, I'll see if I can get my hands on one.Just what I need...another piece of discontinued gear in my rig!On Dec 31, 2005, at 1:07 AM, Kim Flint wrote:Digitech PMC-10
19:
Wasn't there some sort of memory-dropping issue with the PMC-10, or
55:
> >> to see the PMC10 back built with better quality
37:
>> to see the PMC10 back built with better quality
24:
controllers (Behringer FCB, Digitech PMC-10, etc.) ought to be
24:
>to see the PMC10 back built with better quality
57:
>>>to see the PMC10 back built with better quality
27:
Digitech PMC-10! 29:
http://www.loopers-delight.com/tools/PMC10/PMC10.html
46:
>> to see the PMC10 back built with better quality
21:
to see the PMC10 back built with better quality
3:
Re: digitech pmc-10 10:
Subject: Re: digitech pmc-10 20:
>Wasn't there some sort of memory-dropping issue with the PMC-10, or
Limit of 5 matched lines per file exceeded...
19:
Although I own and use the mysterious PMC-10, it would be great if the
18:
On Jan 4, 2006, at 8:58 PM, Gary Lehmann wrote:This is the pedal I replaced with the PMC-10, and aside from not having a momentary function also, i assume you are saying that the pmc-10 doesn't have a momentary function, because the midigator does...
3:
Re: digitech pmc-10 10:
Subject: Re: digitech pmc-10 37:
>>By the way, does anybody know when the PMC-10 was first produced and
Limit of 5 matched lines per file exceeded...
18:
does the PMC do note on/ off, send sys-ex, have multiple midi commands/midi channels per footpedal and have the ability to name eveything? just curious, i'm not familiar with it. if it does all that, i might need to move over to that pedal.. does it also have a jack for cv pedal?On Jan 4, 2006, at 8:58 PM, Gary Lehmann wrote:This is the pedal I replaced with the PMC-10, and aside from not having a momentary function (and no PC editor software--yo, Sean!), there is not a lot of difference between them--this is the kind of MIDI foot controller most EDP power users need.
3:
OT: PMC-10 Spotted For Sale... 10:
Subject: OT: PMC-10 Spotted For Sale... 19:
After last week's discussion on the Digitech PMC-10 MIDI Foot
Limit of 5 matched lines per file exceeded...
3:
Re: digitech pmc-10 10:
Subject: Re: digitech pmc-10 27:
>By the way, does anybody know when the PMC-10 was first produced and when
Limit of 5 matched lines per file exceeded...
3:
RE: digitech pmc-10 10:
Subject: RE: digitech pmc-10 36:
good sophisticated stuff like the PMC-10 and original DMC ground control
Limit of 5 matched lines per file exceeded...
3:
RE: digitech pmc-10 10:
Subject: RE: digitech pmc-10 22:
>(PMC-10 > EDP, nothing in between). Maybe it was unique to mine or mine
Limit of 5 matched lines per file exceeded...
24:
> current "digitech pmc-10" thread (latencies, creating/restoring
26:
current "digitech pmc-10" thread (latencies, creating/restoring
3:
Re: digitech pmc-10 10:
Subject: Re: digitech pmc-10
Limit of 5 matched lines per file exceeded...
200601/msg00084:Re: foot controllers with defaults
46:
This is the pedal I replaced with the PMC-10, and aside from not having a
200601/msg00126:RE: Using a laptop onstage: Dominic Frasca's take is misguided
40:
of the PMC-10 footcontroller available to me. That was great until mine
556:
RE: digitech pmc-10, January 03, 2006 559:
RE: digitech pmc-10, January 03, 2006 717:
Re: digitech pmc-10, January 03, 2006 731:
Re: digitech pmc-10, January 03, 2006
Limit of 5 matched lines per file exceeded...
3:
Re: digitech pmc-10 10:
Subject: Re: digitech pmc-10 30:
By the way, does anybody know when the PMC-10 was first produced and when
Limit of 5 matched lines per file exceeded...
3:
RE: digitech pmc-10 10:
Subject: RE: digitech pmc-10 19:
No, this was a PMC-10, which I owned for about 6 months...I had asked
Limit of 5 matched lines per file exceeded...
19:
This is the pedal I replaced with the PMC-10, and aside from not having a
3:
RE: digitech pmc-10 10:
Subject: RE: digitech pmc-10 20:
(PMC-10 > EDP, nothing in between). Maybe it was unique to mine or mine was
Limit of 5 matched lines per file exceeded...
22:
>>This is the pedal I replaced with the PMC-10, and aside from not having a 27:
>also, i assume you are saying that the pmc-10 doesn't have a momentary
200601/msg00163:Re: Using a laptop onstage: Dominic Frasca's take is misguided
56:
> of the PMC-10 footcontroller available to me. That was great until mine
200601/msg00257:practice versus reading instruction manuals Re: foot controllers
46:
> current "digitech pmc-10" thread (latencies, creating/restoring
38:
Digitech PMC-10 Footcontroller w/ EV-5 exp. pedal
200604/msg00631:Anyone got a Digitech PMC-10 for sale?
3:
Anyone got a Digitech PMC-10 for sale? 10:
Subject: Anyone got a Digitech PMC-10 for sale?
959:
Anyone got a Digitech PMC-10 for sale?, April 19, 2006
19:
Besides my Digitech PMC-10 midi controller ($250) I'm posting these here
3:
Gear 4 sale... Digitech PMC-10 10:
Subject: Gear 4 sale... Digitech PMC-10 21:
one of my two PMC-10 floor controllers. It's seen plenty of use, but I've
1043:
Gear 4 sale... Digitech PMC-10, May 04, 2006
200605/msg00860:Re: Computers and Global responsibility - was RE: Snap, Crackle, Pop - VST Effect & Sound Card Problems
40:
pmc10 - 44:
slowly diying display and I had to change the batteries in the pmc10 )
200605/msg00864:Re: Computers and Global responsibility - was RE: Snap, Crackle, Pop - VST Effect & Sound Card Problems
65:
> pmc10 - 70:
> slowly diying display and I had to change the batteries in the pmc10 )
200606/msg00526:RE: Addressing a single Echoplex in a Stereo Setup
32:
>So, for midi controllers, this leaves us with the PMC-10 and maybe the 43:
>I will say- I used the PMC-10 for awhile, but, and maybe mine was weird- 49:
latency problem like you describe. But the old digitech PMC-10 definitely 52:
PMC-10 for all his supa-fast pedal pushing. No way he could do that
200606/msg00552:RE: Addressing a single Echoplex in a Stereo Setup
105:
> > PMC-10 for awhile, but, and maybe mine was weird- there was about a 111:
There are a lot of people using the PMC-10 with the echoplex and in other 113:
supposed delay is not the experience of the vast majority of pmc-10 users. 115:
The Digitech PMC-10 really is one of the best midi pedals ever. Sadly it
200606/msg00553:RE: Addressing a single Echoplex in a Stereo Setup
38:
pedal thinks, if you put the capability of the PMC-10 into an enclosure 50:
> The Digitech PMC-10 really is one of the best midi pedals
200606/msg00554:RE: Addressing a single Echoplex in a Stereo Setup
131:
> > > PMC-10 for awhile, but, and maybe mine was 139:
> There are a lot of people using the PMC-10 with the 144:
> majority of pmc-10 users. 146:
> The Digitech PMC-10 really is one of the best midi
200606/msg00556:Re: Addressing a single Echoplex in a Stereo Setup
88:
>> PMC-10 for awhile, but, and maybe mine was weird- there was about a 93:
this is NOT a functionning PMC10. I swear it 126:
>>So, for midi controllers, this leaves us with the PMC-10 and maybe the 139:
>>I will say- I used the PMC-10 for awhile, but, and maybe mine was
Limit of 5 matched lines per file exceeded...
19:
Just a note that I have a PMC-10 fully functional and ready to rock... $225 34:
> tracks,i know the PMC10 could do this.
23:
tracks,i know the PMC10 could do this.
200606/msg00525:RE: Addressing a single Echoplex in a Stereo Setup
25:
So, for midi controllers, this leaves us with the PMC-10 and maybe the 33:
I will say- I used the PMC-10 for awhile, but, and maybe mine was weird-
200606/msg00532:RE: Addressing a single Echoplex in a Stereo Setup
55:
> PMC-10 for awhile, but, and maybe mine was weird- there was about a 100ms 86:
>So, for midi controllers, this leaves us with the PMC-10 and maybe the 98:
>I will say- I used the PMC-10 for awhile, but, and maybe mine was 104:
problem like you describe. But the old digitech PMC-10 definitely does not
Limit of 5 matched lines per file exceeded...
28:
hands-down best MIDI foot controllers -- the Digitech PMC-10 & Lake
35:
with my PMC-10 attached to the Macbook...
44:
> with my PMC-10 attached to the Macbook...
200701/msg00602:Re: New MIDI footpedal from Roland FC-300
57:
Seems well constructed, but definitely this is not the PMC-10 resurrection.
200701/msg00623:RE: New MIDI footpedal from Roland FC-300
20:
http://www.gordius.be/ . This may be the closest yet to the PMC-10- which I 37:
> Seems well constructed, but definitely this is not the PMC-10
32:
should with my 1600 since getting a PMC-10 about a year ago. The Digitech 36:
PMC-10
648:
Anyone trying to sell a Digitech PMC-10, March 12, 2007
200703/msg00392:Anyone trying to sell a Digitech PMC-10
3:
Anyone trying to sell a Digitech PMC-10 10:
Subject: Anyone trying to sell a Digitech PMC-10
3:
PMC-10 LoopTrig difficulty 10:
Subject: PMC-10 LoopTrig difficulty 18:
Howdy...I just picked up a PMC-10 on ebay, and I'm trying make it a sample/loop trigger. I'm running into some weirdness, though.I've got it set to trigger 3 different loops using note on information from the PMC-10 (values 84, 85 & 86). I set up three loops with the Echoplex (using a FCB 1010 controller). Then, I switch to the loop trigs with the PMC-10. While one loop is playing, I hit one of the other loop triggers. A moment of it plays, then there's silence. It actually records over that loop as well. When I hit any other loop triger, they work just fine.
Limit of 5 matched lines per file exceeded...
1188:
PMC-10 LoopTrig difficulty, May 19, 2007
136:
Digitech PMC-10 MIDI Foot controller
21:
No: The reason is I'm playing the Digitech PMC-10, not the original
38:
flexible as my PMC-10. In fact, Patch Mode reminds me a lot of 91:
starting to consider it as perhaps a replacement for my PMC-10 (which
200709/msg00682:Re: Quasi Digital/Analog Modular Looper?
53:
-isnt it a bit late to ask Sean a new Raymond improvement (raymond pmc10
200710/msg00811:Re: FC-300 (was How to simulate a piano sustain pedal)
111:
I'm using it to replace my Digitech PMC-10, which is no longer being
88:
> Noisier than the fcb1010. about the same as the pmc10
68:
Noisier than the fcb1010. about the same as the pmc10
46:
> days anyway.>> I'm using it to replace my Digitech PMC-10, which is> no longer being> manufactured of course. That's how good it is. And> at a price of> only about $300, it's less costly than many of the
179:
> I'm using it to replace my Digitech PMC-10, which is
18:
If the PMC-10 can be programmed to send MIDI Notes (and I'm not sure, but I thought it had a reputation as being a full-featured MIDI controller), why not just use the hardware you already have? MIDI Out from the PMC to EDP1, then patch the MIDI Thru from EDP1 to the MIDI In of EDP2. Set the Source# of the two EDP far enough apart that there are no overlaps and program the PMC to send MIDI notes to control the two EDP. One bank can be for EDP1, the other for EDP2. Your "bank up" and "bank down" buttons would allow you to select which EDP you were controlling. 20:
I use two EDPs that are not in sync, and I use a PMC-10 to control one of 27:
the PMC-10, connecting it to both EDPs, but it would have to have some kind
19:
I use two EDPs that are not in sync, and I use a PMC-10 to control one of 27:
the PMC-10, connecting it to both EDPs, but it would have to have some kind
18:
Trying to figure out why: Using assigned pedal (on PMC-10) for Feedback to establish tempo in the Reset condition, using the Undo (assigned to footswitch). Second press of Undo then starts sync, and synced drum machine plays
33:
> I use two EDPs that are not in sync, and I use a PMC-10 to control one of 42:
> the PMC-10, connecting it to both EDPs, but it would have to have some
31:
Date: Mon, 12 May 2008 23:36:48 -0700From: travishartnett@gmail.comTo: Loopers-Delight@loopers-delight.comSubject: Re: midi splitter?If the PMC-10 can be programmed to send MIDI Notes (and I'm not sure, but I thought it had a reputation as being a full-featured MIDI controller), why not just use the hardware you already have? MIDI Out from the PMC to EDP1, then patch the MIDI Thru from EDP1 to the MIDI In of EDP2. Set the Source# of the two EDP far enough apart that there are no overlaps and program the PMC to send MIDI notes to control the two EDP. One bank can be for EDP1, the other for EDP2. Your "bank up" and "bank down" buttons would allow you to select which EDP you were controlling.TH 33:
I use two EDPs that are not in sync, and I use a PMC-10 to control one ofthem - the other one can only be controlled by pushing the EDP pushbuttons.Of course, because the EDPs are not in sync, I don't have to control bothEDPs at once - I do different things with them so I would first use thefirst EDP, then the other.It would be nice if I had a tiny box that would simply split the signal fromthe PMC-10, connecting it to both EDPs, but it would have to have some kindof manual switch so the midi signals would either go this way or that way.Get 5GB of online storage for free! Get it Now!
512:
Re: Moebius newbie PMC-10, November 22, 2008 800:
Moebius newbie PMC-10, November 22, 2008 1079:
Re: Moebius newbie PMC-10, November 23, 2008
3:
Moebius newbie PMC-10 10:
Subject: Moebius newbie PMC-10 20:
combination with my PMC-10 (that I used to control my EDP with). While
Limit of 5 matched lines per file exceeded...
3:
Re: Moebius newbie PMC-10 10:
Subject: Re: Moebius newbie PMC-10 21:
> the PMC-10?
Limit of 5 matched lines per file exceeded...
3:
Re: Moebius newbie PMC-10 10:
Subject: Re: Moebius newbie PMC-10 21:
combination with my PMC-10 (that I used to control my EDP with). While
Limit of 5 matched lines per file exceeded...
18:
TSR is way more programmable than the AM8000R. I had both, preceded by the venerable Digitech IPS-33B which was also very programmable, but the TSR really blew doors and was way ahead of it's time. Digitech was also responsible for the PMC-10 Midi Floor Controller, which despite it's bugginess, was an incredible piece of kit. The Behringer is a pale shadow by comparison.
32:
> responsible for the PMC-10 Midi Floor Controller, which despite it's
29:
To: <pmc10@yahoogroups.com>; "Loopers Delight" 37:
> used as a midi volume pedal (in my case, connected to a PMC-10 and used
8:
To: <pmc10@yahoogroups.com>,"Loopers Delight" <Loopers-Delight@loopers-delight.com> 20:
used as a midi volume pedal (in my case, connected to a PMC-10 and used
44:
> used as a midi volume pedal (in my case, connected to a PMC-10 and used
63:
>> with a regular jack, and works only in combination with my PMC10 midi 65:
>> currently thinking of leaving the PMC10 at home when going to Y2K9
31:
with a regular jack, and works only in combination with my PMC10 midi 33:
currently thinking of leaving the PMC10 at home when going to Y2K9 because
21:
Doesn't the guitar rig pedal have inputs for an expression pedal? Plug your volume pedal in there and try it out, Expression pedals usually have stereo jacks on them tho). The midi, (or equivlent control data) gets in to your computer via usb.I think...g> From: mp@mpeters.de> To: Loopers-Delight@loopers-delight.com> Subject: Guitar Rig 1.1 pedal anyone?> Date: Wed, 9 Sep 2009 13:21:37 +0200> > I use an old Guitar Rig 1 version in my current setup, a copy of an original> that a friend owns but never used. He still has the pedal too and could give> it to me. Right now it seems I need a midi volume pedal - but the Guitar Rig> pedal only has regular guitar jacks and does not seem to work as a midi> pedal. How does it work anyway? does anyone use it or remember it? I didn't> have a chance to try it yet.> > About the midi volume pedal that I need, I have a volume pedal that I can> use as a volume control inside of Bidule but it is a regular volume pedal> with a regular jack, and works only in combination with my PMC10 midi> controller which recognizes it and turns it into a midi signal. I am> currently thinking of leaving the PMC10 at home when going to Y2K9 because> it is so large - if I do that I will have to control loops manually with the> Nanokontrol, and I can't use my volume pedal then. I'm thinking of getting> another volume pedal that can be connected directly into midi, e.g. as a> midi in into my Axon ... and because I also use Guitar Rig I thought maybe> that Guitar Rig pedal can be used as a volume controller not only for Guitar> Rig but also for other sound sources such as midi instruments.> > I hope this doesn't sound too confusing :) maybe I'm a little confused> myself.> > -Michael> > View your other email accounts from your Hotmail inbox. Add them now.
19:
Why oh why was the Digitech PMC-10 so damned buggy. It was (IS) the
23:
I connected the midi out from my PMC-10 footpedal to the midi in of the 24:
AX-50, hoping that the PMC-10 would turn up as a midi-in device in Bidule. 29:
I used a Steinberg USB-2-Midi to plug the PMC-10 into the USB of my
201002/msg00893:Re: using the Axon AX-50 midi input
22:
weekend, but I believe that you can do that but your pmc-10 will be 41:
> I connected the midi out from my PMC-10 footpedal to the midi in of the 42:
> AX-50, hoping that the PMC-10 would turn up as a midi-in device in 49:
> I used a Steinberg USB-2-Midi to plug the PMC-10 into the USB of my
201002/msg00912:Re: using the Axon AX-50 midi input
26:
> I used a Steinberg USB-2-Midi to plug the PMC-10 into the USB of my
201002/msg00894:Re: using the Axon AX-50 midi input
33:
> I connected the midi out from my PMC-10 footpedal to the midi in of the 34:
> AX-50, hoping that the PMC-10 would turn up as a midi-in device in 42:
> I used a Steinberg USB-2-Midi to plug the PMC-10 into the USB of my
3:
Digitech PMC-10 for sale!` 10:
Subject: Digitech PMC-10 for sale!` 20:
I've decided to sell my PMC-10. It's in pretty good, but obviously used, condition. And I have the power supply, manual and programmer.
1100:
Digitech PMC-10 for sale!`, October 25, 2010
59:
PMC-10, and even firing off PC macros with my Peavey PC1600x. I don't
3:
PMC-10 MIDI Pedal 10:
Subject: PMC-10 MIDI Pedal 18:
Is anyone here still using the Digitech PMC-10?
Limit of 5 matched lines per file exceeded...
479:
PMC-10 MIDI Pedal, January 22, 2011 692:
Re: PMC-10 MIDI Pedal, January 22, 2011
3:
Re: PMC-10 MIDI Pedal 10:
Subject: Re: PMC-10 MIDI Pedal 34:
> Is anyone here still using the Digitech PMC-10?
Limit of 5 matched lines per file exceeded...
3:
Digitech PMC10 for sale! 10:
Subject: Digitech PMC10 for sale! 18:
Hi, all...I've have a Digitech PMC-10, with the power supply and programmer, that I would love to sell. It's in good shape and works well. I can provide photos, if needed, and possibly the original manual.
Limit of 5 matched lines per file exceeded...
201102/msg00526:RE: Soft Step real feedback please
32:
> you are making me nervous because i just bought a used PMC10;-(( 35:
PMC10 40:
PMC10, or how do you program it?
3:
Re: Digitech PMC10 for sale! 10:
Subject: Re: Digitech PMC10 for sale! 18:
Thanks, Jeff! Glad you like 'em!I'm so sorry that I haven't been back in touch from your previous contact, man. I'll get back with ya soon! If you know anyone interested in my PMC10 or Boss sampler, I will make them a DEAL!
Limit of 5 matched lines per file exceeded...
19:
Absolutely - the PMC10 can send any messages you want in every patch 25:
>This is why i got the PMC10 recently, i hope that works,AFAIK the 26:
>PMC10 can set note commands on different channels per patch and not
57:
> Absolutely - the PMC10 can send any messages you want in every patch 63:
>>This is why i got the PMC10 recently, i hope that works,AFAIK the 64:
>>PMC10 can set note commands on different channels per patch and not
201102/msg00516:Re: Soft Step real feedback please
21:
you are making me nervous because i just bought a used PMC10;-((
591:
Re: Digitech PMC10 for sale!, February 08, 2011 1416:
Digitech PMC10 for sale!, February 08, 2011 1417:
Re: Digitech PMC10 for sale!, February 08, 2011
27:
This is why i got the PMC10 recently, i hope that works,AFAIK the 28:
PMC10 can set note commands on different channels per patch and not
3:
Re: Digitech PMC10 for sale! 10:
Subject: Re: Digitech PMC10 for sale! 20:
Hi, all...I've have a Digitech PMC-10, with the power supply and programmer, that I would love to sell. It's in good shape and works well. I can provide photos, if needed, and possibly the original manual.
Limit of 5 matched lines per file exceeded...
201103/msg00865:Re: does anyone really use Softstep?
59:
> Im lucky i recently found a PMC10,for 80.00dlls is not that big and it
201103/msg00917:Re: does anyone really use Softstep?
88:
>>>> Im lucky i recently found a PMC10,for 80.00dlls is not that big and it
201103/msg00805:Re: does anyone really use Softstep?
26:
>> Michael but you have the PMC10 right? not using it anymore?
201103/msg00903:Re: does anyone really use Softstep?
80:
>>> Im lucky i recently found a PMC10,for 80.00dlls is not that big and it
201103/msg00796:RE: does anyone really use Softstep?
19:
> Michael but you have the PMC10 right? not using it anymore?
201103/msg00783:Re: does anyone really use Softstep?
33:
> Michael but you have the PMC10 right? not using it anymore?
201103/msg00860:Re: does anyone really use Softstep?
31:
Im lucky i recently found a PMC10,for 80.00dlls is not that big and it
201103/msg00782:Re: does anyone really use Softstep?
23:
Michael but you have the PMC10 right? not using it anymore?
201103/msg00891:Re: does anyone really use Softstep?
74:
>> Im lucky i recently found a PMC10,for 80.00dlls is not that big and it
201103/msg00774:Re: Foot controller for a dream looper
19:
I just got a PMC10,uff its been a long time we will see what that can do...
84:
MIDI In port the PMC-10 comes in through).
201106/msg00166:Re: NextLoop/LoopCopy functions(boomerang III?)
18:
I rarely use the "record new part to empty loop slot" on the EDP,im so used to copying while overdubbing and there is still a lot to do with that.Though i having lots of fun now with 2 EDPs controlled separately with my PMC10 ,this footcontroller is god send,finally i can completely control both independently but synced with one FC,no software all hardware!
201107/msg00331:Re: rocktron midimate foot controler
18:
if u can get a Digitech PMC10 in ebay perhaps do it!
28:
Digitech Jamman--controller would be Digitech PMC-10
201107/msg00332:RE: rocktron midimate foot controler / Yamaha MFC10
22:
http://fr.audiofanzine.com/pedalier-midi/digitech/PMC-10/ 73:
> if u can get a Digitech PMC10 in ebay perhaps do it!
201112/msg00108:Re: MIDI Controllers for Ableton Live
22:
i use either the fcb1010 or the pmc10 both work awesome!
Summary for query "pmc-10,pmc10":
Found 2641 matches in 783 files.
408 matches in HTML tags ignored.
Archive Top | Looper's Delight Home | Looper's Delight Mailing List Info