[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Old LP1 upgrade problem



Finally got it working!

For any others struggling with this, connected the LP1 to my router...

1)  Found my router IP 10.1.10.1 and set my LP1 IP to 10.1.10.20 which was > my laptop IP
2)  Set my LP1 Gateway to my router IP
3)  Set my LP1 Netmask to 255.255.255.0
4)  Opened a CMD window and successfully ran ping 10.1.10.20

Still couldn't connect with the browser so just for fun I ran the LP1Ctl.jar and it actually connected!  After a couple minutes I looked at my browser tab (which I'd left open) and it had connected as well.  Ran a few upgrades with the java tool.  Shut it all down and restarted...browser won't connect again, but the java tool still works.  What a mess, but at least I got out of the buggy OS I'd loaded to something better.

Thanks for your help Rob :-)
Dennis


On Sat, Sep 1, 2018 at 10:54 AM Noah Peterson <noah@noahpeterson.com> wrote:
Ah Ted... you're so kind.

But inside I'm laughing.



Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone


-------- Original message --------
From: tedkillian <tedkillian@charter.net>
Date: 01/09/2018 12:22 PM (GMT-06:00)
To: Loopers-Delight@loopers-delight.com
Subject: Re: Old LP1 upgrade problem

Mr. Anthony Wiench,

There is no one to take you off of this list (once you’ve subscribed) except yourself.

Yes, it’s true, no one can take you off the list but you.

The original owner/operator (Kim Flint) died years ago and there is nobody at home but us LD chickens (the remaining members of the list).

That said . . . there is a mechanic that you can initiate to get yourself off the list.

Follow these instructions.

To unsubscribe, send an mail with the word “unsubscribe" in both the subject and body, and no signature files or anything else, to:

<Loopers-Delight-request@loopers-delight.com>

If per chance you are on the digest version of Looper’s Delight, send your unsubscribe request to:

<Loopers-Delight-d-request@loopers-delight.com>

Good bye and good luck.

You have to do this yourself.

No one here can do it for you.

> On Sep 1, 2018, at 8:17 AM, Anthony Wiench <ajwiench@gmail.com> wrote:
>
> Please take me off your email list
>
> Thank You
>
> Anthony “AJ” Wiench
> Broker – Owner
> Cell: 925-570-9800
> www.OnePointRealty.net
> CA BRE# 01145903
>
> Sent from my iPhone
>
>
>
>>
>
> On Sep 1, 2018, at 9:08 AM, formantuk <formantuk@yahoo.co.uk> wrote:
>
>> Hi Dennis,
>>
>> first thing would be to establish what IP your router is on this is normally 192.168.1.1 but this may not always be the case.
>>
>> for example if the router is 192.168.1.1 the LP1 should look like this:
>>
>> IP:  192.168.1.5
>> Gate:  192.168.1.1
>> Netmask: 255.255.255.0
>>
>> I used to use IP: 192.168.1.5 (I chose .5 as the laptop would normally take .2 desktop .3 etc.
>>
>> If using the crossover adapter you have to connect the LP1 directly to the laptop not via the router.
>>
>> I used to manually set a fixed the IP for a windows machine like this:
>> https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/
>> Then set the gateway to whatever IP you fixed the laptop to.
>>
>> example:
>>
>> IP:  192.168.1.5   LP1
>> Gate:  192.168.1.2 laptop
>> Netmask: 255.255.255.0
>>
>> one further tip - clear you browsers cache
>>
>> Regards
>>
>> Rob
>>
>>
>>
>>
>> On 01/09/2018 00:52, Dennis M wrote:
>>> Hi all,
>>>
>>> I've been trying to connect my 2006 LP1 through ethernet directly to my laptop to upgrade the OS via a browser...unfortunately I can't get the connection to work. Here's what I'm doing:
>>>
>>> 1) Set LP1 as follows from my 1.20 manual:
>>>
>>> IP:  192.168.99.2
>>> Gate:  192.168.99.1
>>> Netmask: 255.255.255.0
>>>
>>> 2) Set laptop ethernet:properties:Internet Protocol Version 4 to the exact same settings as the LP1.
>>> 3) Open browser and try to connect with: http://192.168.99.2 but it eventually times out.
>>> 4) I've tried with both a regular ethernet cable and a crossover cable...no connection.
>>> 5) I've also tried letting the laptop dynamically determine the IP, Gate, Netmask...no connection.
>>>
>>> I'm going nuts trying to get this simple connection to work with no success.  Am I missing something obvious???
>>>
>>> Thanks!
>>> Dennis