Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: reducing "time to setup"--



When I had a Boomerang III, I did everything in serial sync.  That way, I could start with short loops.  It also let me set up loops to come in on time without having to count.

For example, I could do a song like Hey Joe with only having to get through the entire progression twice before singing.  I would beatbox one bar and then let it repeat, and then jump into the rhythm part.  I could cue the third loop of bass so when the rhythm hit the turnaround, I could go right at it.  I am not an great looper by any means, but figured out some of the math behind it.  I am realizing I really miss the Boomerang and want another.

----------
Mike Fugazzi
vocals/harmonica
http://www.mikefugazzi.com
Facebook
YouTube
Mantra Custom Harmonicas


On Fri, Dec 6, 2013 at 7:36 AM, phillip wilson <phillwilson@hotmail.com> wrote:
 


> >> Could you please elaborate on ways you've found to minimize this
> >> "rampup" time?

I would suggest using "multiply" (A LOT) ...
 
in any performance I tend to have loops spinning at 1 bar , 2 bar, 4 bar , 8 bar and "long form" intervals...these in my setup can come from anywhere groove boxes, midi loopers or actual audio ...but nearly all my performances have them , the trick is how to over lap them...
 
for instance
 
an electribe set to just 16 steps makes for a VERY quick entry drum pattern to get the feel for the timing of my song.
 
over that I might add a 2 bar loop BUT I don't initially loop it , I just play freeform until I find a part that sounds more "hooky" , I record this bit and leave it looping...because the audience heard more than the 2 bars, they don't recognise the loop point so quickly...
 
this gives me time to head back over to the 1 bar drum loop and change it up a bit, making it sound less like a fixed "layer"...
 
after that I often start adding in the bass or chord structure, I often work in 8 bar loops but again I might riff around for 32 until I find which chords are the nicest to layer against the riff I just made....
 
then I can cancel out the drums completely and break things down a bit.....make some changes whilst under mute...maybe change the actual kit sounds being used...
 
before bringing them back in along with some kind of rising sound or similar to gain a "build up feel"
 
then add in either the bass or chord element in reaction to what I layered down first.
 
 
.....that is about the total of my music practice.
 
to do this requires flexible routing (so you can pick sounds/ what is getting looped ) dynamically, the second is multiple places to create loops....having a few loopers or tracks within a single looper is , to me, the single most useful way to break out of "looping sounding like looping"...I am sure others could take this much MUCH further than me, what I do is improv  and fun but not polyrhythmic or technical at all...but I love it.
 
here is an example from last night if anyone is interested.
 
http://soundcloud.com/myonemanband/mombimprov1
 
interesting topic,
 
Phill MyOneManBand