[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: EDP Powering problem.

Yes got it to work with the original cable and an adapter. 

Cheers for everyones help


Date: Mon, 5 Sep 2011 12:50:29 -0700
Subject: Re: EDP Powering problem.
From: halimzainal@gmail.com
To: Loopers-Delight@loopers-delight.com

my bad. sorry for the slight misinformation. thank you for correcting.

thats not the problem
if one was only 130V it would theoretically be possible to create a short circuit when loaded with 230V but very unlikely
the current through the EDP is far below 2A anyway, so if there was a fault in it, the internal fuse would blow, exept if there is a short cirquit right at its power socket.

the safety switch reacts to much smaller currents that "run away" so if only this switches off, there may be a insulation problem in the EDP, maybe even a cap between power input and ground which is too big for your safety switch.

first test would be whether the power cable itself makes the fuse blow