[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index][Author Index]

**To**:**Loopers-Delight@loopers-delight.com****From**:**eib halimski <halimzainal@gmail.com>****Subject**:**Re: EDP Powering problem.****Date**:**Mon, 5 Sep 2011 12:50:29 -0700**

my bad. sorry for the slight misinformation. thank you for correcting.

thats not the problemif one was only 130V it would theoretically be possible to create a short circuit when loaded with 230V but very unlikelythe current through the EDP is far below 2A anyway, so if there was a fault in it, the internal fuse would blow, exept if there is a short cirquit right at its power socket.the safety switch reacts to much smaller currents that "run away" so if only this switches off, there may be a insulation problem in the EDP, maybe even a cap between power input and ground which is too big for your safety switch.first test would be whether the power cable itself makes the fuse blow

**Follow-Ups**:- RE: EDP Powering problem.
*From:*james leight <jleight881@hotmail.co.uk>

- RE: EDP Powering problem.

**References**:- EDP Powering problem.
*From:*james leight <jleight881@hotmail.co.uk>

- Re: EDP Powering problem.
*From:*mark francombe <mark@markfrancombe.com>

- RE: EDP Powering problem.
*From:*james leight <jleight881@hotmail.co.uk>

- Re: EDP Powering problem.
*From:*eib halimski <halimzainal@gmail.com>

- RE: EDP Powering problem.
*From:*james leight <jleight881@hotmail.co.uk>

- Re: EDP Powering problem.
*From:*Matthias Grob <matilists@gmail.com>

- RE: EDP Powering problem.
*From:*james leight <jleight881@hotmail.co.uk>

- Re: EDP Powering problem.
*From:*Matthias Grob <matilists@gmail.com>

- EDP Powering problem.

- Prev by Date: Re: RE: Midi out from edp.
- Next by Date: Re: RE: Midi out from edp. FROM THE TESTING LAB
- Previous by Thread: Re: EDP Powering problem.
- Next by Thread: RE: EDP Powering problem.
- Index(es):