[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Boomerang 3



Thanks Todd, that sounds very hopeful! It sounds like it might be closer to the 2880 only better. More headroom, and more individual control over the unsynced loops. I wish they carried them in stores here so I could sit down and play with it. Still they have a good return policy online...

Thanks for doing this test!!

j

On Sun, Oct 31, 2010 at 9:21 PM, Todd Matthews <gtmatthews@gmail.com> wrote:
So I just finished my first ambient looping experience on the Rang 3:) 

So theres a decay knob on the left side on the rang that you can turn up which is similar to feedback. If you turn it all the way up then your previous overdub will only play once and if its all the way down it does phrase sampling, repeating the loop continuously at the same level. I tried it out with the decay knob set right to the center, inbetween the two extremes, and it did a nice job of slowly fading out my previous loops as I added more overdubs. What seems different with this than with an delay pedal is that decay does not start to happen till after you record your first loop and then put it into stacking(overdub) mode. So your first loop will repeat it itself at the same volume until you finish recording your 1st loop and then pressing the stacking button ......then the previous takes fade with each pass through as you add more. I think ambient style looping would work well with a Rang 3 if you did these things

-Set it in free play mode where all loops play unsynced
-Set the optional stacking behavior so you can record seamless loops w/o volume ramps at the loop boundaries
-Turn the decay knob so previous overdubs slowly fade as you add new ones

Keep it mind I'm absolutely clueless on the subject of ambient looping so take this account with a grain of salt:)

Stereo/mono speaking - My bass is going through an M9 and going into the rang3 stereo and my effects sound like they are in stereo to me in all three loops .......so that would mean it's 3 stereo loops I would think? You have like 4 1/2 mins of looping time in stereo if you have it set to 48khz so I would assume that's combined time if you are using all three loops at the same time in free play mode.

I need some chocolate peanut butter cups.

Happy Halloween,

Todd Matthews
On Oct 31, 2010, at 4:27 PM, Jeff Duke wrote:

Yes I think so Sjaak, we do have a similar approach I think. I come from using delays for my looping and have never been really comfortable with "phrase samplers" which the Boomer is of course. Just too stiff for me. Great if I played songs, hehe

The 2880 is a phrase sampler at heart but also comes from the EH 16 sec school of thinking in some important ways. I use it as close as I can to a delay type looper only with reverse and octave. And I combine that with the DD 20. The two together are as close as I have been able to get to what I am looking for. The M 9 although mono is actually a pretty cool looper with an ex ped. But not the end all of course.

The main reason I am reconsidering the 2880 is the frustrating lack of headroom! I can and do deal with it but it really limits my use of dynamics...

I guess that is hardware and will never be addressed although i do write to the forums, etc...sigh :)


thanks,

J

On Sun, Oct 31, 2010 at 2:55 PM, Sjaak Overgaauw <tcplugin@gmail.com> wrote:
On Sun, Oct 31, 2010 at 6:10 AM, Jeff Duke <jeffloops@gmail.com> wrote:
> Like if you have one track fading while you are recording another if you
> follow me, Just how independent are these tracks?
> Can a track fade even when not in overdub? Probably not but it would be a
> good thing.

Sounds like you're looping the same way as me. There was another tread
1-2 months ago and if I remember it well, the Rang III can't do that.
It's still not clear to me how the feedback (called Decay) exactly
works, global or per track.

--
Sjaak Overgaauw
http://premonitionfactory.com/
http://livelooping.be/