[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Mobius in a rack unit

Thanks Paul. there are some cool mini itx motherboards out there. I
can definitely see doing this.

On Sun, Sep 12, 2010 at 5:18 PM, paul <phaslem@wightman.ca> wrote:
> sorry forgot to put the website.....
> http://www.itxdepot.com/xcart/product.php?productid=1789&cat=44055&page=1
> At 08:15 PM 9/12/2010, you wrote:
>> I also built a rackmount computer about 4 years ago. At the time I found
>> an old 1U case that was about 11 in deep and put together a computer 
>with an
>> mini intel board (DQ45EK) and a 3 ghz cpu, and 4 gig ram. at the time 
>> largest hard drive was 500 gig but that has proved to be plenty since 
>> only using it for live performance. At home I hook up a large monitor 
>> programing but when I perform I just use one of those little touch 
>> which is adequate to see what's going on in mobius. I'm also using 
>> inside of bidule.
>> I'll have to look for one of those slide out monitors though that would 
>> really slick and be much more convienient than pulling out all these 
>> pieces and putting them together.
>> check out this web site, they have a 1U barebones computer for under
>> $600.00 if you add in the intel board, 4 gig ram and 500 gig hard 
>drive. A
>> CPU would add another $200.00 and you have one hell of a rackmount 
>> Paul Haslem
>> www.dulcify.ca
>> Ontario, Canada

Art Simon
myspace [dot] com/artsimon