] [Thread Prev
Re: Getting sound in and out of a computer
The Saffire would be your ins and outs for audio into and out of the computer, and would connect with 1 cable to the firewire port on your computer. From the Saffire you can have outputs for a mixer or amp, etc.
On Wed, Aug 25, 2010 at 12:11 AM, Philip <email@example.com>
Wow! That does look like a nice little unit.
So, the Saffire would be the front end with mikes and DI from the my guitar amp, then connected to the firewire interface on my computer.
Then for the signal going to the mixing board at the venue, would I take that out of the audio out of the computer, or can I take that back out of the Saffire?
On Aug 25, 2010, at 3:42 PM, doc rossi wrote:
I'm happy with my Focusrite Saffire Pro 24 - I chose it for the mic preamps more than anything else. Good value for the price.
On Aug 25, 2010, at 8:14 AM, Rafael Nunes wrote:
I personally use an M-Audio Fast Track Pro USB interface. I want to get a Focusrite Saffire Pro 24 DSP though, for its routing/effects options. Most USB/Firewire interfaces have useable in/out, the biggie is obviously the Preamp.
On Tue, Aug 24, 2010 at 6:57 PM, Philip <firstname.lastname@example.org>
At home I use an iMac, Logic and a Mackie Onyx 1220 This works fine for at home. The firewire connection pretty much eliminates problems with latency, but it is way to bulky to carry around and a PITA to set up and take down.
What do you computer loopers use for getting sound into your computers and then back out?
Rafa's One Man Band Online:
Rafa's One Man Band Online:http://rafasonemanband.bandcamp.com/