[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: New Loop

Hey Chris,

Thanks for the listen.
All the songs were tracked in the studio.
Listening to some of your tracks now.
Digging it.
Actually my next CD is more in the pop rock vein.
I've been busy trying to remember how to play a kit for this, haven't done
that since I was 12.

Let me know if you decide to go the Boomerang route.



On Sat, January 2, 2010 12:14 pm, fh@flatheadband.com wrote:
> "but I'd also have to get a good midi Ed's"..typo.  "good midi FC (foot
> controller)" is what I meant to say...stupid spellchecker got me
> again...:)
>    -------- Original Message --------
>  Subject: RE: New Loop
>  From: fh@flatheadband.com
>  Date: Sat, January 02, 2010 11:09 am
>  To: Loopers-Delight@loopers-delight.com
>  I started looking for an edp yesterday after reading Todd's post and
> hearing his work...of course there are no edp's that I can find  to buy,
> and the search lead me to the looperlative site.  the lp1 looks really
> sweet. it's a little pricey for me at the moment but i might swing it...
> but I'd also have to get a good midi Ed's (sorry but behringer gear,
> specifically their mixers, preamps, and di's, has always sucked in my
> experience and I know their fcb1010? gets a lot of love here, i could try
> one at gc I guess).  I play around with ambiloop connected to audiomulch
> via virtual audio cable on my pc, controlled with my qwerty kb, and with
> a good laptop that would be more than enough for what I do if i added a
> midi foot controller, but I've had stability issues with computers (even
> highend macbook pros) at live gigs and just don't trust that kind of
> setup right now.  the lp1 does look great, I didn't see a mini on their
> product page...
> on the rang III, I've debated over getting that as well...now that it's
> out of beta I might just go that route, I just wish it had a similar
> layout to the original...as you know there's nothing like not having to
> bend down at all during a performance..no knobs is a great thing. also,
> with a new looper I'd like to finally be able to midi sync to a drum
> machine or the like, and the 'rang III's midi capabilities are limited at
> this point (ports are for software upgrades and linking to other 'rang
> III's).
> with a higher sampling rate I could probably get by without panning as I
> have become really good at layering on this old 'rang..it comes down to
> technique more than anything...lots of practice...lots.  I jam at least
> 3-4 hours a day looping and writing. and other days it playing bass with
> bands or recording traditionally (drums, bass, guitar and vocals).
> thanks for the info Andre, I'd love to see/read up on the looperlative
> mini you're talking about...also checked out your site, is your material
> looped live or tracked? in2mate sounded really cool..
> and Todd, I've done the simple acoustic/vocal thing for years
> too...sometimes it's the best thing in the world not to worry about any
> real gear huh? :)
> thanks again,
> Chris
>    -------- Original Message --------
>  Subject: RE: New Loop
>  From: André_Donawa
>  Date: Sat, January 02, 2010 9:44 am
>  To: Loopers-Delight@loopers-delight.com
>  Hi Chris,
>  You might want to take a look at the Rang III.
>  Two Sample Rates - 48KHz or 24KHz, both with 20 bit samples; through
>  signal is always 48KHz with 24 bit samples
>  http://www.boomerangmusic.com/Rang%20III.html
>  The Rang was my first looper (not counting my first adventures of 
>  sounds from one portable tape recorder to another for a max of about 4
>  loops before it just all went to noise).
>  I loved it's ease of use.
>  I also had an echoplex which I loved, but it was stolen and lately I've
>  been using mobius and bidule on my laptop.
>  Even though I like the flexibility of my laptop setup I find I spend way
>  too much time looking at the screen during performances.
>  I'm currently using the looping function in the m9 which is a really
> great
>  pedal, but I'm missing my stereo.
>  If you don't need stereo you should definitely have a look at Bob
>  Amstadt's mini Looperlative. I don't think it's out yet but I saw a Beta
>  version when I was at Rick's place. If stereo wasn't an issue for me I'd
>  get it.
>  Of course I'm still trying to think of a way to scrape up some funds for
>  the LP1. Ahhh.... one can dream.
>  A fellow looper from Bim,
>  Andre
>  http://twitter.com/AndreDonawa
>  http://www.andredonawa.com
>  http://cdbaby.com/all/andredonawa
>  http://www.myspace.com/andredonawa
>  On Fri, January 1, 2010 8:30 pm, fh@flatheadband.com wrote:
>  > I see, I was thinking of upgrading from the 'rang due to sample rate
> and
>  > routing/panning options. I'm not as concerned about recording quality
> (I
>  > don't record my looping other than to capture the moment), this is for
>  > live solo performance and I like simplicity. for 'in the box' looping
> and
>  > recording I use software.
>  > I've got a decent signal chain: taylor 314ce with a bagg's m1/padi
>  > preamp, beta58 vocal mic, green bullet harmonica mic, marshall as50r
>  > acoustic amp, 'rang and pedals in the loop so I can loop/effect vocals
>  > and guitar...but the boomerang's best sampling rate is only 24k, 
>  > freq max... so once I layer about 5-6 things it gets a little muddy
> with
>  > no panning options. I compensate with some pedals and technique on
> guitar
>  > and vocals, like singing in the green bullet for dynamics and
>  > flavor...I'm adding a small 6ch mixer for more eq & panning
>  > capabilities than the marshall, but it hasn't arrived yet...my loop 
>  > of the rang will still be mono but I can separate it from the live
>  > instruments and gain a little more clarity...
>  > thanks for the info and happy new year to you as well...
>  >
>  > -------- Original Message --------
>  > Subject: Re: New Loop
>  > From: Todd Chambeau
>  > Date: Fri, January 01, 2010 1:19 pm
>  > To: Loopers-Delight@loopers-delight.com
>  >
>  > Chris,
>  > Glad you liked it. There was not much post-production, but I went
> directly
>  > out of my Allen& Heath mixing board into Pro Tools. This way I
> got
>  > away from the boxy sounding mic on the camcorder. Then when I mixed
> down
>  > in Protools I added a touch of Eq at 7k and 2db worth of gain 
>  > through a Manley Vari-Mu compressor. I guess some would say that is a
>  > decent amount of "Post Production"The reverbish sound of the loop is
> from
>  > the presets on the A&H Mixing board.The only non-live portion
> of the
>  > looping, was the strat lead and one of the high harmony vocal parts,
> which
>  > I did to cover up an off-key part. The Strat went directly into
> Protools,
>  > where I added a hint of reverb, nothing else.Someone can correct me if
> I
>  > am wrong, but I do not think the EDP will give you a "better quality "
>  > sound. It really starts with the quality of instruments, then your
>  > recording chain.The EDP probably has more options on it's looping
>  > capability, but I have only scratched the surface with it and really
> just
>  > mostly use the overdub feature to layer parts.
>  > Let me know if you have any other questions.Happy New YearTodd
>  >
>  >
>  >
>  >
>  >
>  >
>  > On Jan 1, 2010, at 12:43 PM, fh@flatheadband.com wrote:I've been
> lurking
>  > for a while as well, looping with a 'rang for a couple of years and am
>  > working up to shooting a vid of my performances, your work is
>  > inspiring...how much post work did you do to the track? if all that's
>  > live, I think I might have to move past my boomerang if this is what 
>  > edp sounds like. I play guitar, bass and sing and the low vocals 
>  > sound clear...loved the track and I echo the comments on the track's
>  > progression into chaos...nice.
>  >
>  > Chrishttp://www.flatheadband.com
>  > -------- Original Message --------
>  > Subject: New Loop
>  > From: Todd Chambeau
>  > Date: Wed, December 30, 2009 12:02 pm
>  > To: Loopers-Delight@loopers-delight.com
>  >
>  >
>  > Loopers,
>  >
>  > I just wanted to thank everyone for the help over the last year. I've
>  > learned alot from just lurking and asking the occasional questions. I
>  > would also like to thank Luca from Italy for sending me that EDP
> manual.
>  >
>  >
>  > Here is loop I did after sorting through some old family video.
>  > It is through my EDP.
>  >
>  >
>  > http://www.youtube.com/watch?v=7vEzb0TzvOY
>  >
>  > Thanks
>  > Todd Chambeau
>  >
>  >
>  >