Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP question



Hi Mark,
all presets have the same number of loops,the only difference between them 
is the way insert behaves,otherwise the are setup pretty much the 
same.Anyway i overwrote the program and now is fine,i am thinking that 
when i was doing a lof of syncronization i might have messed with the 
tempo select and saved it as a preset to always respond to that tempo 
setting...
oh well theres still something always new from the EDP!


www.myspace.com/luisangulocom


--- mark francombe <mark@markfrancombe.com> schrieb am So, 20.9.2009:

> Von: mark francombe <mark@markfrancombe.com>
> Betreff: Re: EDP question
> An: Loopers-Delight@loopers-delight.com
> Datum: Sonntag, 20. September 2009, 6:23
> >as if it was putting me in tempo select
> mode---
> 
> But IS IT in tempo select mode? Test by twisting the
> feedback knob. and see if the tempo changes..
> 
> Are you sure that its not just that the new preset has a
> different amount of nextloops set, to the preset that you
> are changing from? Then EDP tends to display the amount of
> seconds of loop time PER loop, when you enter this new loop.
> If you swap between loops that have the SAME number of
> nextloops, it shows nout, apart from the preset number...
> AND rememebr tat the only time iot will display this seconds
> number is when in reset (stopped) cos when you change
> presets whaile running, it EDP doesnt change your nextloops
> settings. (Cos if you go from a 6 loop preset to a 2 loop
> preset, you would lose 4 loops, which EDP doesnt let you do,
> clever bugger.
> 
> 
> 
> maybe its that?
> Check if the preset is working anyway?
> 
> M
> 
> On Sun, Sep 20, 2009 at 2:45 PM,
> L.Angulo <labaloops@yahoo.com>
> wrote:
> 
> 
> Hi there gang,
> 
> I have an unusual problem with my EDP,i have 3 presets
> which i call with my FCB1010 through program changes 1,2 and
> 3.
> 
> everytime i call up program 1 the screen of the EDP shows
> the number 100 as if it was putting me in tempo select mode
> which i dont want,ive checked my FCB1010 settings and all is
> sending is program 1 and ccs to the expression pedals
> anybody knows what the problem might be?
> 
> 
> 
> i guess i could overwrite the preset but im curious what
> has happened.
> 
> thanx
> 
> Luis
> 
> 
> 
> www.myspace.com/luisangulocom
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> www.markfrancombe.com
> http://vimeo.com/user825094
> http://uk.youtube.com/user/markfrancombe
> 
> 
> http://www.myspace.com/markfrancombe
> http://www.looop.no/shop/catlabel.php?q=Synch%20Non%20Synch
> 
> 
> 
>