Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP: Issues with TempoSelect when MoreLoops=2



I definitely have LoopCopy set to ti.  I thought that when I changed it 
from off, it would immediately solve the problem, but no joy.

Thanks anyway.

btw, I'd be keen to know if anyone else can reproduce this problem.

Stephen

--- On Sat, 11/29/08, Travis Hartnett <travishartnett@gmail.com> wrote:

> From: Travis Hartnett <travishartnett@gmail.com>
> Subject: Re: EDP: Issues with TempoSelect when MoreLoops=2
> To: Loopers-Delight@loopers-delight.com
> Date: Saturday, November 29, 2008, 4:03 PM
> If you want your loops to all be even multiples of another
> loop, I believe
> you need to have LoopCopy set to "ti", for
> "time".
> 
> TH
> 
> On Sat, Nov 29, 2008 at 7:58 AM, Stephen Scott
> <stevoj@yahoo.com> wrote:
> 
> >
> >
> > OK Andy, I tried this exactly as suggested.  I've
> set the tempo to 120bpm,
> > (btw 8th/Cycles=8, so that the display reads 2.0 for
> the cycle length).
> >  What happens is that the first loop records just fine
> for as long as I
> > need.  When I switch to Next Loop, the display shows
> me that it's on loop2
> > (OK), the red LED counts time as usual (OK) and the
> green cycle LED counts
> > up as I think it should (ie, it increments by one
> every 2 seconds).  BUT
> > when I press RECORD, the display stops at, say, 3.6 or
> 5.4, ie NOT a
> > multiple of 2 as expected.
> >
> >
> >
> > This is now happening consistently (previously I
> thought I was getting it
> > work OK sometimes, so consistency is good anyway). 
> Also, previously, even
> > when it was working OK, I'd save the preset
> parameter, but when I came back
> > it to it later, it wouldn't work.
> >
> >
> >