Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Setting Up my new Gibson Echoplex Pro



Thanks Travis,
Great information, I'll let you know how it goes.

Todd
On Sep 10, 2008, at 11:43 PM, Travis Hartnett wrote:

There's a variety of ways to handle it, but probably the simplest would be to have a channel for each "source" (guitar, bass, vocals) and the EDP in "post-fader" aux send, so that if the volume on the channel is muted, nothing gets sent to the aux.  The EDP would then come back through the aux return. 

Having multiple EDP's sync'ed together allows you to maintain total track independence for your loops, so you can lay down a bass grove, add guitar and vocals, then selectively changed each of those three layers independently.  This requires a lot of practice though, to make seamless song-structures in the heat of performance, although it can be done.  With just one EDP, you have to plan in a different way if you want to have some elements drop in and out of the arrangement, which requires a different set of skills.  However, it does cost less money.

TH

On Wed, Sep 10, 2008 at 8:37 PM, Todd Chambeau <tchambeau@comcast.net> wrote:
Thanks Travis,

Thats Great news. I wasn't sure how I was going to tell the wife that I needed two more Echoplex's. I will be getting a mixer ASAP. I am not too familiar with Mixer's either, so I am assuming that the Echoplex will be sent to the Mixer Aux and then routed to each channel?
Told you I was a caveman.