Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP Undo question



Hi
 
I replaced all my switches, when you push the button, the old ones make contact and the new switches they click. They make better contact this way. Brandname: Miyama ,type number: MS-730 made in Japan.
 
Simon
 

Sent: Monday, June 16, 2008 10:23 AM
Subject: RE: EDP Undo question

Thanks---I have no electronics skills (as in multimeter use) but I should be able to spray out the switches.  Still mad at myself for missing the MF blowout on the pedals over Memorial Day weekend…

 

dave

 

micdave@hiwaay.net  

 


From: Travis Hartnett [mailto:travishartnett@gmail.com]
Sent: Saturday, June 14, 2008 9:39 AM
To: Loopers-Delight@loopers-delight.com
Subject: Re: EDP Undo question

 

Absolutely sounds like an EFC-7 switch issue.  You can hook a multimeter up to the switch and measure the resistance and compare that the chart somewhere in the EDP documentation on the LD site.  Contact cleaner can fix it for a while, eventually the switches break down and have to be replaced.  Fortunately they're cheap and designed to be replaced with minimal fuss.

TH

On Sat, Jun 14, 2008 at 12:03 AM, andy butler <akbutler@tiscali.co.uk> wrote:



Dave Gallaher wrote:



Lately, I've noted that after three or so consecutive undo's done in quick
order, the light doesn't go out--instead, it will act as if I've hit the
record button, starting a new loop from scratch.  Since I haven't changed
the programming, could this be an issue in the FC7 itself?