Re: midi splitter?

["Travis Hartnett" <travishartnett@gmail.com>]

If the PMC-10 can be programmed to send MIDI Notes (and I'm not sure, but I thought it had a reputation as being a full-featured MIDI controller), why not just use the hardware you already have?  

MIDI Out from the PMC to EDP1, then patch the MIDI Thru from EDP1 to the MIDI In of EDP2.  Set the Source# of the two EDP far enough apart that there are no overlaps and program the PMC to send MIDI notes to control the two EDP.  One bank can be for EDP1, the other for EDP2.  Your "bank up" and "bank down" buttons would allow you to select which EDP you were controlling.

TH

On Mon, May 12, 2008 at 11:28 PM, Michael Peters <mp@mpeters.de> wrote:

I use two EDPs that are not in sync, and I use a PMC-10 to control one of
them - the other one can only be controlled by pushing the EDP pushbuttons.
Of course, because the EDPs are not in sync, I don't have to control both
EDPs at once - I do different things with them so I would first use the
first EDP, then the other.

It would be nice if I had a tiny box that would simply split the signal from
the PMC-10, connecting it to both EDPs, but it would have to have some kind
of manual switch so the midi signals would either go this way or that way.