] [Thread Prev
Re: Triggering EDP via drum machine (SR16)
> Marco Coblenz wrote:
> > Hi,
> > Nice place here! This is my first post. Sorry if the question has
> > answered before but I did not find the answer by searching the
> > I plan to invest in a Gibson Echoplex Digital Pro. One main
> > I want to use it for are rhythmical loops that evolve via short
> > quantized replace/substitute/insert actions. I want those actions to
> > performed automically via Midi using a pattern sequencer. More
> > specifically I would use an alesis SR16 drum machine for the trigger
> > patterns and assign midi notes to the pads. The SR16 sends an midi on
> > and then midi off event with pressing a pad.
> > My question is, would it work like this? Can someone tell by
> > Are there sync or other problems? Would the SR16 work in this szenario
> > or should I use a different tool and which? Did someone has a similar
> > application or variation of it but used different means? Any tips and
> > tricks?
> > Thanks ...
> > - Marco
I noticed people are starting to post answers that do not address the
same question, so I re-read your mail but can still not make out if
you (1) just want to use the SR16 as another MIDI surface for manual
control or (2) will program MIDI sequences on the SR16 and send them
into the EDP to make stuff happening inside the looper? There's a lot
to both contexts.
Greetings from Sweden