Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Resetting the Behringer FCB



Thanks, Bill. I have a problem with my controller pedal B. For some reason, it doesn't start kicking in  (incrementing values above 0) until it is pressed about 25%. It's a real pain in the ass with my max/msp system. Pedal A is fine. I even calibrated the pedals..no effect. Any clue why this would occur?  You think the pedal is defective?

Kris
 
----- Original Message -----
 

I don't think it makes any difference for your application, though I believe the original factory setting is for the V-amp. In any case, factory rest for the FCB101 is:

  Press & hold footswitches "1" & "6" for at least 3 seconds during power on. The display will start to count down from 9 to 0. Newer versions also refer to manual. This procedure overwrites all user edited presets and replaces them with the original factory settings.

 Shazam

Bill

 

 

-----Original Message-----
From: Krispen Hartung [mailto:khartung@cableone.net]
Sent: Sunday, June 10, 2007 10:39 AM
To: Loopers-Delight@loopers-delight.com
Subject: Resetting the Behringer FCB

 

I need to reset my FCB. Anyone know what different settings you get between

the three types of reset configuration shown in the manual? (page 12) All I

need is program changes and both express pedals activated.

 

1 + 6 V-AMP family products

1 + 7 BEHRINGER guitar amps

1 + 8 BASS V-AMP product range

 

Kris