Von: Rainer Thelonius Balthasar Straschill [mailto:email@example.com]
Gesendet: Freitag, 1. Juni 2007 21:42
Betreff: AW: OT: VST plugin to do balance/pan function
I'd like to come back to your offer below...short answer: I need it for Windows.
Long answer: please find enclosed a reqspec for the thing.
Requirement specification for a VST plugin for Windows XP platforms which allows for panning of mono sources and “balancing” of stereo sources, in the following called „panner“
The panner shall be implemented as a VST plugin for Windows XP platforms as a stereo in/stereo out device and shall be able to function with common bit depths and sample rates up to 32bit/96kHz.
The panner shall have at least one control (“panpot”).
The panpot shall provide one real value to the panner ranging from -1…+1. 0 shall be defined as “center position”. -1 shall be defined as “hard left”. +1 shall be defined as “hard right”. This value shall be called “p”
The panner’s controls shall be controllable within Ableton Live by
The panner shall function as a 2 in, 2 out mixer which sends a combination of the two channels of the stereo input pair (IL and IR) to the two channels of the stereo output pair (OL and OR) defined by a mathematical transformation.
The mathematical transformation shall be of the form
OL = IL*f(p) + IR*g(p)
OR = IL*f(-p)) + IR*g(-p)
with f, g real functions of p.
There shall be at least one choice of function pairs f, g.
There shall be one choice of functions f, g as follows:
f = 1 ; p < 0
f = 1-p ; otherwise.
g = 1-f.
If the number of function pairs is greater than one, there shall be a control for selecting the function.
If the selected functions f,g are continuous, changing p may not lead to signal artifacts.
The panner shall be optimized for resource-friendlyness, i.e. it shall not tax the host computer’s CPU or main memory more than necessary.
> -----Ursprüngliche Nachricht-----
> Von: firstname.lastname@example.org
> [mailto:email@example.com] Im Auftrag von Os
> Gesendet: Donnerstag, 12. April 2007 22:14
> An: Loopers-Delight@loopers-delight.com
> Betreff: Re: OT: VST plugin to do balance/pan function
> I could write you one pretty quickly. Do you need it for Mac
> or Windows?
> On 12/04/07, Rainer Thelonius Balthasar Straschill
> <firstname.lastname@example.org> wrote:
> > I need a pan/balance thing to put in my signal chain in
> Live in front
> > of Mobius. It should be a stereo in/stereo out VST and do
> the following:
> > It should be basically a dual mono in/stereo out thing with pan
> > functions in each input and one dial controlling them. If
> the dial is
> > centered, the pan settings should be left for the left
> input and right
> > for the right input. If you turn the dial to the left, the right
> > channel's pan setting should be turned to the left, if you turn the
> > dial to the right, the left channel's pan setting should be
> turned to the right.
> > And perhaps different settings for level compensation.
> > Is something like this available?
> > Rainer